心想事成 发表于 2004-6-28 08:07:49

你只需把下载的iso映象刻录成光盘,直接从光盘启动系统就行了。保存配置的时候插入一张空白的软盘。对于两块3COM的或英特尔的网卡,它是自动识别的

voatec 发表于 2004-6-28 09:26:12

大于800MB的硬盘,在写盘的时候要加参数 -u。另外,FreeBSD自带的网卡驱动对Realtek网卡的支持不太好。用官方的驱动替代后会有性能上大幅度提升。

0779hjj 发表于 2004-6-28 11:47:09

不支持PPPoE,是吗?

liusimin 发表于 2004-6-28 12:05:13

晕怎么可能不支持呢?支持呀

liusimin 发表于 2004-6-28 12:06:32

感觉有点烦琐因为要用光盘版的做主机上需要有光驱和软驱还不如找个硬盘来的妥: )

xieganhui 发表于 2004-6-28 13:07:37

硬件要求如何?CPU:C333内存:64   硬盘:3.2G两张8139网卡,运行m0m0顺畅吗?

liusimin 发表于 2004-6-28 13:47:09

。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。

ghg123456 发表于 2004-6-28 15:38:11

好东西啊,我们可以把它给汉了把

liusimin 发表于 2004-6-28 15:55:37

恩我正在研究等全部研究会了我找几个把它给“汉(汗)”了

0779hjj 发表于 2004-6-28 16:34:24

ghg123456:    你的签名好难看哦.图片还这么大.

0779hjj 发表于 2004-6-28 16:47:04

mono运行硬件的基本环境是什么?比如说:C300A,32M,双100M网卡.这样的配置可以正常带多少台机(假设每台机有的在玩网游,有的在听音乐,有的在看网络电影,网络总出口充足的情况下)

xieganhui 发表于 2004-6-28 16:57:44

FreeBSD/i386 4.9-RELEASE Hardware NotesFreeBSD/i386 runs on a wide variety of ``IBM PC compatible'' machines. Due to the wide range of hardware available for this architecture, it is impossible to exhaustively list all combinations of equipment supported by FreeBSD. Nevertheless, some general guidelines are presented here.Almost all i386-compatible processors are supported. All Intel processors beginning with the 80386 are supported, including the 80386, 80486, Pentium, Pentium Pro, Pentium II, Pentium III, Pentium 4, and variants thereof, such as the Xeon and Celeron processors. (While technically supported, the use of the 80386SX is specifically not recommended.) All i386-compatible AMD processors are also supported, including the Am486, Am5x86, K5, K6 (and variants), Athlon (including Athlon-MP, Athlon-XP, Athlon-4, and Athlon Thunderbird), and Duron processors. The AMD 伸an SC520 embedded processor is supported. The Transmeta Crusoe is recognized and supported, as are i386-compatible processors from Cyrix and NexGen

liusimin 发表于 2004-6-28 17:35:47

呵呵UP

0779hjj 发表于 2004-6-28 17:44:11

这样的路由我喜欢:要求低,稳定,免费,换网卡不用重做系统,安装方便(有点像ghost,不用刻光盘),功能不错,速度应该也不会慢............哈哈,我太喜欢了.

xieganhui 发表于 2004-6-28 18:27:03

不过在在FreeBSDChina论坛中看到有遍这样的文章:《解决“FreeBSD NAT 较Win2ksNAT慢”难题备忘录》里面说到FreeBSD对8139支持不太好,有没兄弟做了出来?来发表一下!
页: 1 2 [3] 4 5 6 7 8 9 10 11 12
查看完整版本: 用m0n0做软件路由器