实例分析

情灭缘尽 · 发表于 2010-9-7 18:19:55

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？注册

×

本帖最后由情灭缘尽于 2010-9-7 18:44 编辑

简单的实例分析帖，欢迎大家批评指正

每个配置我都按照配置文件显示形式和命令行显示形式各发了一份，大家各取所。
建议初学者看详细的看CMDS方式的配置文件，你配置的时候照着输入就可以了设置相应的信息了。
中等及其以上水平者，可以忽略cmds方式的配置文件，直接看配置文件形式的显示，该显示方式比较直观，一目了然。
高级和超高级者，您可以无视该帖，但是希望您能为广大学习vyatta的学习者提供必要的帮助。在此表示感谢。

情灭缘尽 · 发表于 2010-9-7 18:21:03

本帖最后由情灭缘尽于 2010-9-7 18:24 编辑

用虚拟机搭建了一个小环境，如图

情灭缘尽 · 发表于 2010-9-7 18:27:14

NAT设备配置信息
vyatta@vyatta:~$ show configuration
interfaces {
ethernet eth0 {
      address 172.31.3.1/24
      description vmnet3-to-VR3
      duplex auto
      hw-id 00:0c:29:88:e1:33
      smp_affinity auto
      speed auto
}
ethernet eth1 {
      address 172.31.2.1/24
      description vmnet2-to-VR4
      duplex auto
      hw-id 00:0c:29:88:e1:3d
      smp_affinity auto
      speed auto
}
ethernet eth2 {
      address 192.168.1.160/24
      description vmnet1-to-cisco7609
      duplex auto
      hw-id 00:0c:29:88:e1:47
      smp_affinity auto
      speed auto
}
loopback lo {
}
}
protocols {
ospf {
      area 0.0.0.0 {
         network 172.31.2.0/24
         network 172.31.3.0/24
      }
      default-information {
         originate {
            always
            metric-type 2
         }
      }
      parameters {
         abr-type cisco
         router-id 172.31.3.1
      }
      redistribute {
         connected {
            metric-type 2
         }
         static {
            metric-type 1
         }
      }
}
static {
      route 0.0.0.0/0 {
         next-hop 192.168.1.254 {
         }
      }
}
}
service {
nat {
      rule 1 {
         destination {
            address 0.0.0.0/0
         }
         outbound-interface eth2
         protocol all
         source {
            address 0.0.0.0/0
         }
         type masquerade
      }
}
ssh {
      port 22
      protocol-version v2
}
}
system {
host-name NAT
login {
      user vyatta {
         authentication {
            encrypted-password ****************
         }
         level admin
      }
}
name-server 202.103.24.68
name-server 202.103.0.117
ntp-server 0.vyatta.pool.ntp.org
package {
      auto-sync 1
      repository community {
         components main
         distribution stable
         password ****************
         url http://packages.vyatta.com/vyatta
         username ""
      }
}
syslog {
      global {
         facility all {
            level notice
         }
         facility protocols {
            level debug
         }
      }
}
time-zone Asia/Shanghai
}

CMD方式显示
set interfaces ethernet eth0 address '172.31.3.1/24'
set interfaces ethernet eth0 description 'vmnet3-to-VR3'
set interfaces ethernet eth0 duplex 'auto'
set interfaces ethernet eth0 hw-id '00:0c:29:88:e1:33'
set interfaces ethernet eth0 smp_affinity 'auto'
set interfaces ethernet eth0 speed 'auto'
set interfaces ethernet eth1 address '172.31.2.1/24'
set interfaces ethernet eth1 description 'vmnet2-to-VR4'
set interfaces ethernet eth1 duplex 'auto'
set interfaces ethernet eth1 hw-id '00:0c:29:88:e1:3d'
set interfaces ethernet eth1 smp_affinity 'auto'
set interfaces ethernet eth1 speed 'auto'
set interfaces ethernet eth2 address '192.168.1.160/24'
set interfaces ethernet eth2 description 'vmnet1-to-cisco7609'
set interfaces ethernet eth2 duplex 'auto'
set interfaces ethernet eth2 hw-id '00:0c:29:88:e1:47'
set interfaces ethernet eth2 smp_affinity 'auto'
set interfaces ethernet eth2 speed 'auto'
set interfaces loopback 'lo'
set protocols ospf area 0.0.0.0 network '172.31.2.0/24'
set protocols ospf area 0.0.0.0 network '172.31.3.0/24'
set protocols ospf default-information originate 'always'
set protocols ospf default-information originate metric-type '2'
set protocols ospf parameters abr-type 'cisco'
set protocols ospf parameters router-id '172.31.3.1'
set protocols ospf redistribute connected metric-type '2'
set protocols ospf redistribute static metric-type '1'
set protocols static route 0.0.0.0/0 next-hop '192.168.1.254'
set service nat rule 1 destination address '0.0.0.0/0'
set service nat rule 1 outbound-interface 'eth2'
set service nat rule 1 protocol 'all'
set service nat rule 1 source address '0.0.0.0/0'
set service nat rule 1 type 'masquerade'
set service ssh port '22'
set service ssh protocol-version 'v2'
set system host-name 'NAT'
set system login user vyatta authentication encrypted-password '$1$2sKi.Eb7$zxGaQgNohnfy1YZs3.ky8.'
set system login user vyatta level 'admin'
set system name-server '202.103.24.68'
set system name-server '202.103.0.117'
set system ntp-server '0.vyatta.pool.ntp.org'
set system package auto-sync '1'
set system package repository community components 'main'
set system package repository community distribution 'stable'
set system package repository community password ''
set system package repository community url 'http://packages.vyatta.com/vyatta'
set system package repository community username ''
set system syslog global facility all level 'notice'
set system syslog global facility protocols level 'debug'
set system time-zone 'Asia/Shanghai'
commit

情灭缘尽 · 发表于 2010-9-7 18:37:20

VR3配置信息

vyatta@VR3:~$ show configuration
interfaces {
ethernet eth0 {
      address 172.31.7.1/24
      description vmnet7-to-VR1
      duplex auto
      hw-id 00:0c:29:24:fd:e9
      smp_affinity auto
      speed auto
}
ethernet eth1 {
      address 172.31.4.1/24
      description vmnet4-to-VR2
      duplex auto
      hw-id 00:0c:29:24:fd:f3
      smp_affinity auto
      speed auto
}
ethernet eth2 {
      address 172.31.3.254/24
      description vmnet3-to-NAT
      duplex auto
      hw-id 00:0c:29:24:fd:fd
      smp_affinity auto
      speed auto
}
loopback lo {
}
}
protocols {
ospf {
      area 0.0.0.0 {
         network 172.31.7.0/24
         network 172.31.4.0/24
         network 172.31.3.0/24
      }
      parameters {
         abr-type cisco
         router-id 172.31.7.1
      }
}
}
service {
ssh {
      port 22
      protocol-version v2
}
}
system {
host-name VR3
login {
      user vyatta {
         authentication {
            encrypted-password ****************
         }
         level admin
      }
}
ntp-server 0.vyatta.pool.ntp.org
package {
      auto-sync 1
      repository community {
         components main
         distribution stable
         password ****************
         url http://packages.vyatta.com/vyatta
         username ""
      }
}
syslog {
      global {
         facility all {
            level notice
         }
         facility protocols {
            level debug
         }
      }
}
time-zone Asia/Shanghai
}

CMD方式显示
vyatta@VR3:~$ show configuration cmds
set interfaces ethernet eth0 address '172.31.7.1/24'
set interfaces ethernet eth0 description 'vmnet7-to-VR1'
set interfaces ethernet eth0 duplex 'auto'
set interfaces ethernet eth0 hw-id '00:0c:29:24:fd:e9'
set interfaces ethernet eth0 smp_affinity 'auto'
set interfaces ethernet eth0 speed 'auto'
set interfaces ethernet eth1 address '172.31.4.1/24'
set interfaces ethernet eth1 description 'vmnet4-to-VR2'
set interfaces ethernet eth1 duplex 'auto'
set interfaces ethernet eth1 hw-id '00:0c:29:24:fd:f3'
set interfaces ethernet eth1 smp_affinity 'auto'
set interfaces ethernet eth1 speed 'auto'
set interfaces ethernet eth2 address '172.31.3.254/24'
set interfaces ethernet eth2 description 'vmnet3-to-NAT'
set interfaces ethernet eth2 duplex 'auto'
set interfaces ethernet eth2 hw-id '00:0c:29:24:fd:fd'
set interfaces ethernet eth2 smp_affinity 'auto'
set interfaces ethernet eth2 speed 'auto'
set interfaces loopback 'lo'
set protocols ospf area 0.0.0.0 network '172.31.7.0/24'
set protocols ospf area 0.0.0.0 network '172.31.4.0/24'
set protocols ospf area 0.0.0.0 network '172.31.3.0/24'
set protocols ospf parameters abr-type 'cisco'
set protocols ospf parameters router-id '172.31.7.1'
set service ssh port '22'
set service ssh protocol-version 'v2'
set system host-name 'VR3'
set system login user vyatta authentication encrypted-password '$1$2sKi.Eb7$zxGaQgNohnfy1YZs3.ky8.'
set system login user vyatta level 'admin'
set system ntp-server '0.vyatta.pool.ntp.org'
set system package auto-sync '1'
set system package repository community components 'main'
set system package repository community distribution 'stable'
set system package repository community password ''
set system package repository community url 'http://packages.vyatta.com/vyatta'
set system package repository community username ''
set system syslog global facility all level 'notice'
set system syslog global facility protocols level 'debug'
set system time-zone 'Asia/Shanghai'
commit

情灭缘尽 · 发表于 2010-9-7 18:38:42

VR4配置信息
vyatta@VR4:~$ show configuration
interfaces {
ethernet eth0 {
      address 172.31.6.1/24
      description vmnet6-to-VR2
      duplex auto
      hw-id 00:0c:29:98:cf:1e
      smp_affinity auto
      speed auto
}
ethernet eth1 {
      address 172.31.5.1/24
      description vmnet5-to-VR1
      duplex auto
      hw-id 00:0c:29:98:cf:28
      smp_affinity auto
      speed auto
}
ethernet eth2 {
      address 172.31.2.254/24
      description vmnet2-to-nat
      duplex auto
      hw-id 00:0c:29:98:cf:32
      smp_affinity auto
      speed auto
}
loopback lo {
}
}
protocols {
ospf {
      area 0.0.0.0 {
         network 172.31.6.0/24
         network 172.31.5.0/24
         network 172.31.2.0/24
      }
      parameters {
         abr-type cisco
         router-id 172.31.6.1
      }
      redistribute {
         connected {
            metric-type 2
         }
         static {
            metric-type 2
         }
      }
}
}
service {
ssh {
      port 22
      protocol-version v2
}
}
system {
host-name VR4
login {
      user vyatta {
         authentication {
            encrypted-password ****************
         }
         level admin
      }
}
ntp-server 0.vyatta.pool.ntp.org
package {
      auto-sync 1
      repository community {
         components main
         distribution stable
         password ****************
         url http://packages.vyatta.com/vyatta
         username ""
      }
}
syslog {
      global {
         facility all {
            level notice
         }
         facility protocols {
            level debug
         }
      }
}
time-zone Asia/Shanghai
}

CMDS方式显示
vyatta@VR4:~$ show configuration cmds
set interfaces ethernet eth0 address '172.31.6.1/24'
set interfaces ethernet eth0 description 'vmnet6-to-VR2'
set interfaces ethernet eth0 duplex 'auto'
set interfaces ethernet eth0 hw-id '00:0c:29:98:cf:1e'
set interfaces ethernet eth0 smp_affinity 'auto'
set interfaces ethernet eth0 speed 'auto'
set interfaces ethernet eth1 address '172.31.5.1/24'
set interfaces ethernet eth1 description 'vmnet5-to-VR1'
set interfaces ethernet eth1 duplex 'auto'
set interfaces ethernet eth1 hw-id '00:0c:29:98:cf:28'
set interfaces ethernet eth1 smp_affinity 'auto'
set interfaces ethernet eth1 speed 'auto'
set interfaces ethernet eth2 address '172.31.2.254/24'
set interfaces ethernet eth2 description 'vmnet2-to-nat'
set interfaces ethernet eth2 duplex 'auto'
set interfaces ethernet eth2 hw-id '00:0c:29:98:cf:32'
set interfaces ethernet eth2 smp_affinity 'auto'
set interfaces ethernet eth2 speed 'auto'
set interfaces loopback 'lo'
set protocols ospf area 0.0.0.0 network '172.31.6.0/24'
set protocols ospf area 0.0.0.0 network '172.31.5.0/24'
set protocols ospf area 0.0.0.0 network '172.31.2.0/24'
set protocols ospf parameters abr-type 'cisco'
set protocols ospf parameters router-id '172.31.6.1'
set protocols ospf redistribute connected metric-type '2'
set protocols ospf redistribute static metric-type '2'
set service ssh port '22'
set service ssh protocol-version 'v2'
set system host-name 'VR4'
set system login user vyatta authentication encrypted-password '$1$2sKi.Eb7$zxGaQgNohnfy1YZs3.ky8.'
set system login user vyatta level 'admin'
set system ntp-server '0.vyatta.pool.ntp.org'
set system package auto-sync '1'
set system package repository community components 'main'
set system package repository community distribution 'stable'
set system package repository community password ''
set system package repository community url 'http://packages.vyatta.com/vyatta'
set system package repository community username ''
set system syslog global facility all level 'notice'
set system syslog global facility protocols level 'debug'
set system time-zone 'Asia/Shanghai'
commit

情灭缘尽 · 发表于 2010-9-7 18:40:03

VR2配置信息
vyatta@VR2:~$ show configuration
interfaces {
ethernet eth0 {
      address 172.31.8.100/24
      description vmnet8-to-bras
      duplex auto
      hw-id 00:0c:29:6c:87:10
      smp_affinity auto
      speed auto
}
ethernet eth1 {
      address 172.31.6.254/24
      description vmnet6-to-VR4
      duplex auto
      hw-id 00:0c:29:6c:87:1a
      smp_affinity auto
      speed auto
}
ethernet eth2 {
      address 172.31.4.254/24
      description vmnet4-to-VR3
      duplex auto
      hw-id 00:0c:29:6c:87:24
      smp_affinity auto
      speed auto
}
loopback lo {
}
}
protocols {
ospf {
      area 0.0.0.0 {
         network 172.31.6.0/24
         network 172.31.8.0/24
         network 172.31.4.0/24
      }
      parameters {
         abr-type cisco
         router-id 172.31.8.100
      }
}
}
service {
ssh {
      port 22
      protocol-version v2
}
}
system {
host-name VR2
login {
      user vyatta {
         authentication {
            encrypted-password ****************
         }
         level admin
      }
}
ntp-server 0.vyatta.pool.ntp.org
package {
      auto-sync 1
      repository community {
         components main
         distribution stable
         password ****************
         url http://packages.vyatta.com/vyatta
         username ""
      }
}
syslog {
      global {
         facility all {
            level notice
         }
         facility protocols {
            level debug
         }
      }
}
time-zone Asia/Shanghai
}

CMDS方式显示
vyatta@VR2:~$ show configuration cmds
set interfaces ethernet eth0 address '172.31.8.100/24'
set interfaces ethernet eth0 description 'vmnet8-to-bras'
set interfaces ethernet eth0 duplex 'auto'
set interfaces ethernet eth0 hw-id '00:0c:29:6c:87:10'
set interfaces ethernet eth0 smp_affinity 'auto'
set interfaces ethernet eth0 speed 'auto'
set interfaces ethernet eth1 address '172.31.6.254/24'
set interfaces ethernet eth1 description 'vmnet6-to-VR4'
set interfaces ethernet eth1 duplex 'auto'
set interfaces ethernet eth1 hw-id '00:0c:29:6c:87:1a'
set interfaces ethernet eth1 smp_affinity 'auto'
set interfaces ethernet eth1 speed 'auto'
set interfaces ethernet eth2 address '172.31.4.254/24'
set interfaces ethernet eth2 description 'vmnet4-to-VR3'
set interfaces ethernet eth2 duplex 'auto'
set interfaces ethernet eth2 hw-id '00:0c:29:6c:87:24'
set interfaces ethernet eth2 smp_affinity 'auto'
set interfaces ethernet eth2 speed 'auto'
set interfaces loopback 'lo'
set protocols ospf area 0.0.0.0 network '172.31.6.0/24'
set protocols ospf area 0.0.0.0 network '172.31.8.0/24'
set protocols ospf area 0.0.0.0 network '172.31.4.0/24'
set protocols ospf parameters abr-type 'cisco'
set protocols ospf parameters router-id '172.31.8.100'
set service ssh port '22'
set service ssh protocol-version 'v2'
set system host-name 'VR2'
set system login user vyatta authentication encrypted-password '$1$2sKi.Eb7$zxGaQgNohnfy1YZs3.ky8.'
set system login user vyatta level 'admin'
set system ntp-server '0.vyatta.pool.ntp.org'
set system package auto-sync '1'
set system package repository community components 'main'
set system package repository community distribution 'stable'
set system package repository community password ''
set system package repository community url 'http://packages.vyatta.com/vyatta'
set system package repository community username ''
set system syslog global facility all level 'notice'
set system syslog global facility protocols level 'debug'
set system time-zone 'Asia/Shanghai'
commit

情灭缘尽 · 发表于 2010-9-7 18:46:14

VR1配置信息
vyatta@VR1:~$ show configuration
interfaces {
ethernet eth0 {
      address 172.31.8.1/24
      description vmnet8-to-bras
      duplex auto
      hw-id 00:0c:29:2a:b1:45
      smp_affinity auto
      speed auto
}
ethernet eth1 {
      address 172.31.7.254/24
      description vmnet7-to-VR3
      duplex auto
      hw-id 00:0c:29:2a:b1:4f
      smp_affinity auto
      speed auto
}
ethernet eth2 {
      address 172.31.5.254/24
      description vmnet5-to-VR4
      duplex auto
      hw-id 00:0c:29:2a:b1:59
      smp_affinity auto
      speed auto
}
loopback lo {
}
}
protocols {
ospf {
      area 0.0.0.0 {
         network 172.31.8.0/24
         network 172.31.7.0/24
         network 172.31.5.0/24
      }
      parameters {
         abr-type cisco
         router-id 172.31.8.1
      }
}
}
service {
ssh {
      port 22
      protocol-version v2
}
}
system {
host-name VR1
login {
      user vyatta {
         authentication {
            encrypted-password ****************
         }
         level admin
      }
}
ntp-server 0.vyatta.pool.ntp.org
package {
      auto-sync 1
      repository community {
         components main
         distribution stable
         password ****************
         url http://packages.vyatta.com/vyatta
         username ""
      }
}
syslog {
      global {
         facility all {
            level notice
         }
         facility protocols {
            level debug
         }
      }
}
time-zone Asia/Shanghai
}

CMDS方式显示
vyatta@VR1:~$ show configuration cmds
set interfaces ethernet eth0 address '172.31.8.1/24'
set interfaces ethernet eth0 description 'vmnet8-to-bras'
set interfaces ethernet eth0 duplex 'auto'
set interfaces ethernet eth0 hw-id '00:0c:29:2a:b1:45'
set interfaces ethernet eth0 smp_affinity 'auto'
set interfaces ethernet eth0 speed 'auto'
set interfaces ethernet eth1 address '172.31.7.254/24'
set interfaces ethernet eth1 description 'vmnet7-to-VR3'
set interfaces ethernet eth1 duplex 'auto'
set interfaces ethernet eth1 hw-id '00:0c:29:2a:b1:4f'
set interfaces ethernet eth1 smp_affinity 'auto'
set interfaces ethernet eth1 speed 'auto'
set interfaces ethernet eth2 address '172.31.5.254/24'
set interfaces ethernet eth2 description 'vmnet5-to-VR4'
set interfaces ethernet eth2 duplex 'auto'
set interfaces ethernet eth2 hw-id '00:0c:29:2a:b1:59'
set interfaces ethernet eth2 smp_affinity 'auto'
set interfaces ethernet eth2 speed 'auto'
set interfaces loopback 'lo'
set protocols ospf area 0.0.0.0 network '172.31.8.0/24'
set protocols ospf area 0.0.0.0 network '172.31.7.0/24'
set protocols ospf area 0.0.0.0 network '172.31.5.0/24'
set protocols ospf parameters abr-type 'cisco'
set protocols ospf parameters router-id '172.31.8.1'
set service ssh port '22'
set service ssh protocol-version 'v2'
set system host-name 'VR1'
set system login user vyatta authentication encrypted-password '$1$2sKi.Eb7$zxGaQgNohnfy1YZs3.ky8.'
set system login user vyatta level 'admin'
set system ntp-server '0.vyatta.pool.ntp.org'
set system package auto-sync '1'
set system package repository community components 'main'
set system package repository community distribution 'stable'
set system package repository community password ''
set system package repository community url 'http://packages.vyatta.com/vyatta'
set system package repository community username ''
set system syslog global facility all level 'notice'
set system syslog global facility protocols level 'debug'
set system time-zone 'Asia/Shanghai'
commit

情灭缘尽 · 发表于 2010-9-8 07:55:24

BRAS这里是用一台ros 4.10模拟的，设置了OSPF路由协议，开启了PPPOED，配置如下

# sep/07/2010 18:47:15 by RouterOS 4.10
# software id = W5EY-LHT9
#
/interface ethernet
set 0 arp=enabled auto-negotiation=yes cable-settings=default comment="" \
disable-running-check=yes disabled=no full-duplex=yes mac-address=\
00:0C:29:36:4F:AB mtu=1500 name=r-v8 speed=100Mbps
set 1 arp=enabled auto-negotiation=yes cable-settings=default comment="" \
disable-running-check=yes disabled=no full-duplex=yes mac-address=\
00:0C:29:36:4F:B5 mtu=1500 name=bras-v9 speed=100Mbps
/ip pool
add name=bras ranges=10.10.0.1
add name=pppoe ranges=10.10.0.20-10.10.0.200
/port
set 0 baud-rate=9600 data-bits=8 flow-control=hardware name=serial0 parity=\
none stop-bits=1
set 1 baud-rate=9600 data-bits=8 flow-control=hardware name=serial1 parity=\
none stop-bits=1
/ppp profile
set default change-tcp-mss=yes comment="" name=default only-one=default \
use-compression=default use-encryption=default use-vj-compression=default
set default-encryption change-tcp-mss=yes comment="" dns-server=202.103.24.68 \
local-address=bras name=default-encryption only-one=default \
remote-address=pppoe use-compression=default use-encryption=yes \
use-vj-compression=default
/queue type
set default kind=pfifo name=default pfifo-limit=50
set ethernet-default kind=pfifo name=ethernet-default pfifo-limit=50
set wireless-default kind=sfq name=wireless-default sfq-allot=1514 \
sfq-perturb=5
set synchronous-default kind=red name=synchronous-default red-avg-packet=1000 \
red-burst=20 red-limit=60 red-max-threshold=50 red-min-threshold=10
set hotspot-default kind=sfq name=hotspot-default sfq-allot=1514 sfq-perturb=\
5
set default-small kind=pfifo name=default-small pfifo-limit=10
/routing bgp instance
set default as=65530 client-to-client-reflection=yes comment="" disabled=no \
ignore-as-path-len=no name=default out-filter="" redistribute-connected=\
no redistribute-ospf=no redistribute-other-bgp=no redistribute-rip=no \
redistribute-static=no router-id=0.0.0.0 routing-table=""
/routing ospf instance
set default comment="" disabled=no distribute-default=never in-filter=ospf-in \
metric-bgp=20 metric-connected=20 metric-default=1 metric-other-ospf=auto \
metric-rip=20 metric-static=20 name=default out-filter=ospf-out \
redistribute-bgp=no redistribute-connected=as-type-1 \
redistribute-other-ospf=no redistribute-rip=no redistribute-static=\
as-type-1 router-id=0.0.0.0
/routing ospf area
set backbone area-id=0.0.0.0 comment="" disabled=no instance=default name=\
backbone type=default
/snmp
set contact="" enabled=no engine-boots=0 engine-id="" location="" \
time-window=15 trap-sink=0.0.0.0 trap-version=1
/snmp community
set public address=0.0.0.0/0 authentication-password="" \
authentication-protocol=MD5 encryption-password="" encryption-protocol=\
DES name=public read-access=yes security=none write-access=no
/system logging action
set memory memory-lines=100 memory-stop-on-full=no name=memory target=memory
set disk disk-file-count=2 disk-file-name=log disk-lines-per-file=100 \
disk-stop-on-full=no name=disk target=disk
set echo name=echo remember=yes target=echo
set remote bsd-syslog=no name=remote remote=0.0.0.0:514 src-address=0.0.0.0 \
syslog-facility=daemon syslog-severity=auto target=remote
/interface bridge settings
set use-ip-firewall=no use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=\
no
/interface l2tp-server server
set authentication=pap,chap,mschap1,mschap2 default-profile=\
default-encryption enabled=no max-mru=1460 max-mtu=1460 mrru=disabled
/interface ovpn-server server
set auth=sha1,md5 certificate=none cipher=blowfish128,aes128 default-profile=\
default enabled=no keepalive-timeout=60 mac-address=FE:05:12:58:91:50 \
max-mtu=1500 mode=ip netmask=24 port=1194 require-client-certificate=no
/interface pppoe-server server
add authentication=pap,chap,mschap1,mschap2 default-profile=\
default-encryption disabled=no interface=bras-v9 keepalive-timeout=10 \
max-mru=1480 max-mtu=1480 max-sessions=0 mrru=disabled \
one-session-per-host=no service-name=bras
/interface pptp-server server
set authentication=mschap1,mschap2 default-profile=default-encryption \
enabled=no keepalive-timeout=30 max-mru=1460 max-mtu=1460 mrru=disabled
/ip accounting
set account-local-traffic=no enabled=no threshold=256
/ip accounting web-access
set accessible-via-web=no address=0.0.0.0/0
/ip address
add address=172.31.8.254/24 broadcast=172.31.8.255 comment="" disabled=no \
interface=r-v8 network=172.31.8.0
/ip dns
set allow-remote-requests=no cache-max-ttl=1w cache-size=2048KiB \
max-udp-packet-size=512
/ip firewall connection tracking
set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \
tcp-close-wait-timeout=10s tcp-established-timeout=1d \
tcp-fin-wait-timeout=10s tcp-last-ack-timeout=10s \
tcp-syn-received-timeout=5s tcp-syn-sent-timeout=5s tcp-syncookie=no \
tcp-time-wait-timeout=10s udp-stream-timeout=3m udp-timeout=10s
/ip firewall service-port
set ftp disabled=no ports=21
set tftp disabled=no ports=69
set irc disabled=no ports=6667
set h323 disabled=no
set sip disabled=no ports=5060,5061
set pptp disabled=no
/ip neighbor discovery
set r-v8 discover=yes
set bras-v9 discover=yes
/ip proxy
set always-from-cache=no cache-administrator=webmaster cache-hit-dscp=4 \
cache-on-disk=no enabled=no max-cache-size=none max-client-connections=\
600 max-fresh-time=3d max-server-connections=600 parent-proxy=0.0.0.0 \
parent-proxy-port=0 port=8080 serialize-connections=no src-address=\
0.0.0.0
/ip service
set telnet address=0.0.0.0/0 disabled=no port=23
set ftp address=0.0.0.0/0 disabled=no port=21
set www address=0.0.0.0/0 disabled=no port=80
set www-ssl address=0.0.0.0/0 certificate=none disabled=yes port=443
set api address=0.0.0.0/0 disabled=yes port=8728
set winbox address=0.0.0.0/0 disabled=no port=8291
/ip socks
set connection-idle-timeout=2m enabled=no max-connections=200 port=1080
/ip traffic-flow
set active-flow-timeout=30m cache-entries=4k enabled=no \
inactive-flow-timeout=15s interfaces=all
/ip upnp
set allow-disable-external-interface=yes enabled=no show-dummy-rule=yes
/ppp aaa
set accounting=yes interim-update=1s use-radius=no
/ppp secret
add caller-id="" comment="" disabled=no limit-bytes-in=0 limit-bytes-out=0 \
name=admin password=admin profile=default-encryption routes="" service=\
pppoe
/queue interface
set r-v8 queue=ethernet-default
set bras-v9 queue=ethernet-default
/radius
add accounting-backup=yes accounting-port=1813 address=172.16.8.140 \
authentication-port=1812 called-id="" comment="" disabled=no domain="" \
realm="" secret=citiloop service=ppp,login,hotspot,wireless,dhcp timeout=\
500ms
/radius incoming
set accept=yes port=1700
/routing bfd interface
set all comment="" disabled=no interface=all interval=0.2sec min-rx=0.2sec \
multiplier=5
/routing mme
set bidirectional-timeout=2 gateway-class=none gateway-keepalive=1m \
gateway-selection=no-gateway origination-interval=5s preferred-gateway=\
0.0.0.0 timeout=1m ttl=50
/routing ospf interface
add authentication=none authentication-key="" authentication-key-id=1 \
comment="" cost=10 dead-interval=40s disabled=no hello-interval=10s \
instance-id=0 interface=all network-type=broadcast passive=no priority=1 \
retransmit-interval=5s transmit-delay=1s use-bfd=no
/routing ospf network
add area=backbone comment="" disabled=no network=172.31.8.0/24
add area=backbone comment="" disabled=no network=10.10.0.0/24
/routing rip
set distribute-default=never garbage-timer=2m metric-bgp=1 metric-connected=1 \
metric-default=1 metric-ospf=1 metric-static=1 redistribute-bgp=no \
redistribute-connected=no redistribute-ospf=no redistribute-static=no \
routing-table=main timeout-timer=3m update-timer=30s
/store
add comment="" disabled=no disk=primary-master name=user-manager1 type=\
user-manager
add comment="" disabled=no disk=primary-master name=web-proxy1 type=web-proxy
/system clock
set time-zone-name=manual
/system clock manual
set dst-delta=+00:00 dst-end="jan/01/1970 00:00:00" dst-start=\
"jan/01/1970 00:00:00" time-zone=+00:00
/system console
add disabled=no port=serial0 term=vt102
set [ find vcno=1 ] disabled=no term=linux
set [ find vcno=2 ] disabled=no term=linux
set [ find vcno=3 ] disabled=no term=linux
set [ find vcno=4 ] disabled=no term=linux
set [ find vcno=5 ] disabled=no term=linux
set [ find vcno=6 ] disabled=no term=linux
set [ find vcno=7 ] disabled=no term=linux
set [ find vcno=8 ] disabled=no term=linux
/system console screen
set line-count=25
/system hardware
set multi-cpu=yes
/system health
set state-after-reboot=enabled
/system identity
set name=Bras
/system logging
add action=memory disabled=no prefix="" topics=info
add action=memory disabled=no prefix="" topics=error
add action=memory disabled=no prefix="" topics=warning
add action=echo disabled=no prefix="" topics=critical
/system note
set note="" show-at-login=yes
/system ntp client
set enabled=no mode=broadcast primary-ntp=0.0.0.0 secondary-ntp=0.0.0.0
/system upgrade mirror
set check-interval=1d enabled=no primary-server=0.0.0.0 secondary-server=\
0.0.0.0 user=""
/system watchdog
set auto-send-supout=no automatic-supout=yes no-ping-delay=5m watch-address=\
none watchdog-timer=yes
/tool bandwidth-server
set allocate-udp-ports-from=2000 authenticate=yes enabled=yes max-sessions=\
100
/tool e-mail
set from=<> password="" server=0.0.0.0:25 username=""
/tool graphing
set page-refresh=300 store-every=5min
/tool graphing interface
add allow-address=0.0.0.0/0 disabled=no interface=all store-on-disk=yes
/tool mac-server
add disabled=no interface=all
/tool mac-server ping
set enabled=yes
/tool sms
set allowed-number="" channel=0 keep-max-sms=0 receive-enabled=no secret=""
/tool sniffer
set file-limit=10 file-name="" filter-address1=0.0.0.0/0:0-65535 \
filter-address2=0.0.0.0/0:0-65535 filter-protocol=ip-only filter-stream=\
yes interface=all memory-limit=10 memory-scroll=no only-headers=no \
streaming-enabled=no streaming-server=0.0.0.0

情灭缘尽 · 发表于 2010-9-8 07:57:51

users为普通pppoe拨号用户，具体配置也十分简单，暂且不表.

geshenggang4 · 发表于 2010-9-8 08:34:25

强！！看起来比ROS难配置啊

txwwy · 发表于 2010-9-10 11:44:19

顶你一下！！！ VYATTA 对intel 高端网卡的支持好多了

情灭缘尽 · 发表于 2010-9-10 12:11:45

顶你一下！！！ VYATTA 对intel 高端网卡的支持好多了
txwwy 发表于 2010-9-10 11:44

登录/注册后可看大图

Linux NAT 2.6.32-1-586-vyatta #1 SMP Mon Aug 2 22:57:10 PDT 2010 i686 GNU/Linux

txwwy · 发表于 2010-9-10 15:51:21

主要是VYATT 对INTEL 网卡的高级性能支持比较多，多队列，多核支持等等

看附近。是INTEL 和VYATTA 做的测试

txwwy · 发表于 2010-9-12 09:32:16

急切盼望你做vyatta 的1个基于端口或者协议的策略路由实验，我搞了半天，没成功

WGHBOY · 发表于 2010-9-12 11:32:28

弄个全中文的,跟害蜘蛛差不多就强了

账号		自动登录	找回密码
密码			注册

[Vyatta] 实例分析

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

第一个实验