|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有账号?注册
×
本帖最后由 arainbow 于 2015-2-26 00:00 编辑
刚收收到官方新闻邮件消息,新的hAP Lite推出(RB941?),建议售价仅21.95美元,折合13X人民币。
该路由器采用高通 QCA9531-BL3A-R的600MCPU,L4授权,32M RAM,无线功率达到22DB(近200MW)。
个人感觉,这个震撼的售价、ros的系统、无线功率,可以秒杀市上一切同类路由器,秒杀各种型号。但可能不是用来玩DDWRT、OPENWRT、SS的料。
在使用上,作家庭无线上网路由器、防火墙、自建专网、科学上网用、做网桥、更换外接天线什么的,统统可以轻易搞来!
采用5VUSB电源,4个RJ45网线口,功耗低,作为便携路由器也仅需要配带一个移动电源就可以了。
如果神人再能改造成可插3G USB卡的,就更完美了。
进入官网产品链接
参数:
Product specificationsDetails | Product code | RB941-2nD | CPU nominal frequency | 650 MHz | CPU core count | 1 | Size of RAM | 32 MB | 10/100 Ethernet ports | 4 | 10/100/1000 Ethernet ports | None | MiniPCI slots | 0 | MiniPCI-e slots | 0 | Wireless chip model | QCA9531-BL3A-R | Wireless standards | 802.11b/g/n | Number of USB ports | 0 | Power Jack | 1 | Supported input voltage | 5 V - 5 V | PoE in | No | PoE out | No | Voltage Monitor | No | PCB temperature monitor | No | CPU temperature monitor | No | License level | 4 | Antenna gain DBI | 1.5 | Current Monitor | No | CPU | QCA9531-BL3A-R | Max Power consumption | 3W | SFP ports | None | SFP+ ports | None | Number of chains | 2 | Serial port | None | Suggested price | $21.95 |
Wireless specifications2.4 GHz |
| TX | RX | 1MBit/s | 22 | -96 | 11MBit/s | 22 | -89 | 6MBit/s | 20 | -93 | 54MBit/s | 18 | -74 | MCS0 | 20 | -93 | MCS7 | 16 | -71 |
erformance test results[td]RB941-2nD | QCA9531 100M 4 port test |
| Mode | Configuration | 64 byte | 512 byte | 1518 byte | kpps | Mbps | kpps | Mbps | kpps | Mbps | Bridging | none (fast path) | 173.6 | 88.9 | 94.0 | 385.0 | 32.5 | 394.8 | Bridging | 25 bridge filter rules | 56.7 | 29.0 | 56.1 | 229.8 | 32.5 | 394.8 | Routing | none (fast path) | 160.8 | 82.3 | 94.0 | 385.0 | 32.5 | 394.8 | Routing | 25 simple queues | 72.6 | 37.2 | 63.7 | 260.9 | 32.5 | 394.8 | Routing | 25 ip filter rules | 34.6 | 17.7 | 33.8 | 138.4 | 32.5 | 394.8 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
|
|