关于路由CL掉线的问题，各位帮我！

guxing8502

这两天， 我的CL路由出现这样一个问题，经常能PING通网关，但就是上不网，
重启一下路由器，刚开始的时候，网关和外网都能上网，但到不了一分钟，外网就PING不通了，
检查外网，没有问题，内网换个交换机，还是没有用，
多重启几次，有时候好能用一两个小时不掉，但一会还掉，
我想问的事，这是什么原因引起，谢谢！

guxing8502

还有，我们路由信息是这样的，大家看看正常不：
Kernel Version 2.4.25
Machine i686 unknown
Current Date and Time Sat Aug 27 10:54:27 EDT 2005
Uptime 10:54am up 33 min, load average: 0.00, 0.00, 0.00
Load Average Last 1 Minute 0.00
Last 5 minutes 0.00
Last 15 minutes 0.00
Memory Usage Total 127016 (100%)
Used 6656 (5%)
Free 120360 (95%)
(c) 1999-2004 Vortech Consulting

guxing8502

日志：
Aug 27 10:21:33 coyote syslog.info syslogd started: BusyBox v1.00-pre7 (2004.02.24-12:37+0000)
Aug 27 10:21:33 coyote syslog.notice klogd: klogd started: BusyBox v1.00-pre7 (2004.02.24-12:37+0000)
Aug 27 10:21:33 coyote user.warn klogd: Linux version 2.4.25 (root@viper.vortech.net) (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #2 Tue Mar 2 20:56:13 EST 2004
Aug 27 10:21:33 coyote user.info klogd: BIOS-provided physical RAM map:
Aug 27 10:21:33 coyote user.warn klogd:  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Aug 27 10:21:33 coyote user.warn klogd:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug 27 10:21:33 coyote user.warn klogd:  BIOS-e820: 0000000000100000 - 0000000007ef0000 (usable)
Aug 27 10:21:33 coyote user.warn klogd:  BIOS-e820: 0000000007ef0000 - 0000000007ef3000 (ACPI NVS)
Aug 27 10:21:33 coyote user.warn klogd:  BIOS-e820: 0000000007ef3000 - 0000000007f00000 (ACPI data)
Aug 27 10:21:33 coyote user.warn klogd:  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Aug 27 10:21:33 coyote user.notice klogd: 126MB LOWMEM available.
Aug 27 10:21:33 coyote user.warn klogd: On node 0 totalpages: 32496
Aug 27 10:21:33 coyote user.warn klogd: zone(0): 4096 pages.
Aug 27 10:21:33 coyote user.warn klogd: zone(1): 28400 pages.
Aug 27 10:21:33 coyote user.warn klogd: zone(2): 0 pages.
Aug 27 10:21:33 coyote user.warn klogd: Kernel command line: initrd=root.tgz initrd_dyn=minix ramdisk_size=4096 root=/dev/ram0 boot=/dev/fd0u1440,vfat BOOT_IMAGE=linux auto
Aug 27 10:21:33 coyote user.info klogd: Initializing CPU#0
Aug 27 10:21:33 coyote user.warn klogd: Detected 1295.212 MHz processor.
Aug 27 10:21:33 coyote user.warn klogd: Console: colour VGA+ 80x25
Aug 27 10:21:33 coyote user.warn klogd: Calibrating delay loop... 2582.11 BogoMIPS
Aug 27 10:21:33 coyote user.info klogd: Memory: 126320k/129984k available (793k kernel code, 3280k reserved, 198k data, 72k init, 0k highmem)
Aug 27 10:21:33 coyote user.info klogd: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Aug 27 10:21:33 coyote user.info klogd: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Aug 27 10:21:33 coyote user.info klogd: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Aug 27 10:21:33 coyote user.info klogd: Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Aug 27 10:21:33 coyote user.warn klogd: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 27 10:21:33 coyote user.info klogd: CPU: L1 I cache: 16K, L1 D cache: 16K
Aug 27 10:21:33 coyote user.info klogd: CPU: L2 cache: 256K
Aug 27 10:21:33 coyote user.debug klogd: CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
Aug 27 10:21:33 coyote user.debug klogd: CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
Aug 27 10:21:33 coyote user.warn klogd: CPU: Intel(R) Celeron(TM) CPU                1300MHz stepping 04
Aug 27 10:21:33 coyote user.info klogd: Enabling fast FPU save and restore... done.
Aug 27 10:21:33 coyote user.info klogd: Enabling unmasked SIMD FPU exception support... done.
Aug 27 10:21:33 coyote user.info klogd: Checking 'hlt' instruction... OK.
Aug 27 10:21:33 coyote authpriv.info dropbear[450]: Running in background
Aug 27 10:21:33 coyote user.warn klogd: POSIX conformance testing by UNIFIX
Aug 27 10:21:33 coyote user.info klogd: PCI: PCI BIOS revision 2.10 entry at 0xfb070, last bus=1
Aug 27 10:21:33 coyote user.info klogd: PCI: Using configuration type 1
Aug 27 10:21:33 coyote user.info klogd: PCI: Probing PCI hardware
Aug 27 10:21:33 coyote user.warn klogd: PCI: Probing PCI hardware (bus 00)
Aug 27 10:21:33 coyote user.warn klogd: Transparent bridge - PCI device 8086:244e
Aug 27 10:21:33 coyote user.info klogd: PCI: Using IRQ router PIIX/ICH [8086/2440] at 00:1f.0
Aug 27 10:21:33 coyote user.info klogd: PCI: Found IRQ 12 for device 00:1f.3
Aug 27 10:21:33 coyote user.info klogd: PCI: Sharing IRQ 12 with 00:1f.5
Aug 27 10:21:33 coyote user.info klogd: PCI: Sharing IRQ 12 with 01:01.0
Aug 27 10:21:33 coyote user.info klogd: Linux NET4.0 for Linux 2.4
Aug 27 10:21:33 coyote user.info klogd: Based upon Swansea University Computer Society NET3.039
Aug 27 10:21:33 coyote user.warn klogd: Initializing RT netlink socket
Aug 27 10:21:33 coyote user.warn klogd: Starting kswapd
Aug 27 10:21:33 coyote user.warn klogd: pty: 256 Unix98 ptys configured
Aug 27 10:21:33 coyote user.info klogd: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Aug 27 10:21:33 coyote user.info klogd: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Aug 27 10:21:33 coyote user.info klogd: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Aug 27 10:21:33 coyote user.info klogd: Real Time Clock Driver v1.10f
Aug 27 10:21:33 coyote user.info klogd: Floppy drive(s): fd0 is 1.44M
Aug 27 10:21:33 coyote user.info klogd: FDC 0 is a post-1991 82077
Aug 27 10:21:33 coyote user.warn klogd: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Aug 27 10:21:33 coyote user.info klogd: NET4: Linux TCP/IP 1.0 for NET4.0
Aug 27 10:21:33 coyote user.info klogd: IP Protocols: ICMP, UDP, TCP
Aug 27 10:21:33 coyote user.info klogd: IP: routing cache hash table of 512 buckets, 4Kbytes
Aug 27 10:21:33 coyote user.info klogd: TCP: Hash tables configured (established 8192 bind 16384)
Aug 27 10:21:33 coyote user.warn klogd: ip_conntrack version 2.1 (1015 buckets, 8120 max) - 320 bytes per conntrack
Aug 27 10:21:33 coyote user.warn klogd: ip_conntrack_pptp version 1.9 loaded
Aug 27 10:21:33 coyote user.warn klogd: ip_nat_pptp version 1.5 loaded
Aug 27 10:21:33 coyote user.warn klogd: ip_tables: (C) 2000-2002 Netfilter core team
Aug 27 10:21:33 coyote user.info klogd: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Aug 27 10:21:33 coyote user.notice klogd: INITRD: Compressed Tar archive found at block 0.
Aug 27 10:21:33 coyote user.warn klogd: VFS: Mounted root (tmpfs filesystem). [ No Ceiling]
Aug 27 10:21:33 coyote user.notice klogd: INITRD: Extracting TGZ archive[0]: |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^Hdone. [1341440 bytes]
Aug 27 10:21:33 coyote user.err klogd: VFS: Close: file count is 0
Aug 27 10:21:33 coyote user.info klogd: Freeing initrd memory: 623k freed
Aug 27 10:21:33 coyote user.info klogd: Freeing unused kernel memory: 72k freed
Aug 27 10:21:33 coyote user.info klogd: Software Watchdog Timer: 0.05, timer margin: 60 sec
Aug 27 10:21:33 coyote user.notice klogd: Intel(R) PRO/100 Network Driver - version 2.3.38-k1
Aug 27 10:21:33 coyote user.notice klogd: Copyright (c) 2004 Intel Corporation
Aug 27 10:21:33 coyote user.notice klogd:
Aug 27 10:21:33 coyote user.info klogd: PCI: Found IRQ 12 for device 01:01.0
Aug 27 10:21:33 coyote user.info klogd: PCI: Sharing IRQ 12 with 00:1f.3
Aug 27 10:21:33 coyote user.info klogd: PCI: Sharing IRQ 12 with 00:1f.5
Aug 27 10:21:33 coyote user.debug klogd: e100: selftest OK.
Aug 27 10:21:33 coyote user.notice klogd: e100: eth0: Intel(R) PRO/100 Network Connection
Aug 27 10:21:33 coyote user.notice klogd:   Hardware receive checksums enabled
Aug 27 10:21:33 coyote user.notice klogd:   cpu cycle saver enabled
Aug 27 10:21:33 coyote user.notice klogd:
Aug 27 10:21:33 coyote user.info klogd: PCI: Found IRQ 11 for device 01:05.0
Aug 27 10:21:33 coyote user.info klogd: PCI: Sharing IRQ 11 with 00:02.0
Aug 27 10:21:33 coyote user.debug klogd: e100: selftest OK.
Aug 27 10:21:33 coyote user.notice klogd: e100: eth1: Intel(R) PRO/100 Network Connection
Aug 27 10:21:33 coyote user.notice klogd: cksums enabled
Aug 27 10:21:33 coyote user.notice klogd:   cpu cycle saver enabled
Aug 27 10:21:33 coyote user.notice klogd:
Aug 27 10:21:33 coyote daemon.info dnsmasq[518]: started, version 2.2 cachesize 150
Aug 27 10:21:33 coyote daemon.warn dnsmasq[518]: failed to drop root privs
Aug 27 10:21:33 coyote daemon.info dnsmasq[518]: read /etc/hosts - 3 addresses
Aug 27 10:21:33 coyote daemon.info dnsmasq[518]: reading /etc/resolv.dns
Aug 27 10:21:33 coyote daemon.info dnsmasq[518]: using nameserver 202.102.227.68#53
Aug 27 10:21:33 coyote daemon.info dnsmasq[518]: using nameserver 202.102.224.68#53
Aug 27 10:21:33 coyote daemon.info rc.firewall: Firewall script set with default: eth1
Aug 27 10:21:33 coyote daemon.info dnsmasq[617]: started, version 2.2 cachesize 150
Aug 27 10:21:33 coyote daemon.warn dnsmasq[617]: failed to drop root privs
Aug 27 10:21:33 coyote daemon.info dnsmasq[617]: read /etc/hosts - 3 addresses
Aug 27 10:21:33 coyote daemon.info dnsmasq[617]: reading /etc/resolv.dns
Aug 27 10:21:33 coyote daemon.info dnsmasq[617]: using nameserver 202.102.227.68#53
Aug 27 10:21:33 coyote daemon.info dnsmasq[617]: using nameserver 202.102.224.68#53
Aug 27 10:21:33 coyote user.notice root: Coyote Masquerading Script started with default: eth1
Aug 27 10:21:33 coyote daemon.info rc.qos: QOS script called with: eth1
Aug 27 14:21:33 coyote daemon.info init: Starting pid 1141, console /dev/tty1: '/sbin/getty'
Aug 27 14:21:33 coyote daemon.info init: Starting pid 1142, console /dev/tty2: '/sbin/getty'
Aug 27 14:21:33 coyote daemon.info init: Starting pid 1143, console /dev/tty3: '/sbin/getty'
Aug 27 10:21:33 coyote daemon.notice thttpd[1144]: thttpd/2.24 26oct2003 starting on 192.168.0.1, port 8180
Aug 27 10:21:35 coyote user.err klogd: e100: eth0 NIC Link is Up 100 Mbps Full duplex
Aug 27 10:21:35 coyote user.err klogd: e100: eth1 NIC Link is Up 100 Mbps Full duplex
Aug 27 14:32:26 coyote auth.err getty: tty1: input overrun
Aug 27 14:32:36 coyote daemon.info init: Process '/sbin/getty 38400 tty1' (pid 1141) exited.  Scheduling it for restart.
Aug 27 14:32:36 coyote daemon.info init: Starting pid 1145, console /dev/tty1: '/sbin/getty'
Aug 27 14:33:52 coyote auth.err getty: tty1: input overrun
Aug 27 14:34:02 coyote daemon.info init: Process '/sbin/getty 38400 tty1' (pid 1145) exited.  Scheduling it for restart.
Aug 27 14:34:02 coyote daemon.info init: Starting pid 1146, console /dev/tty1: '/sbin/getty'
Aug 27 14:35:17 coyote auth.err getty: tty1: input overrun
Aug 27 14:35:27 coyote daemon.info init: Process '/sbin/getty 38400 tty1' (pid 1146) exited.  Scheduling it for restart.
Aug 27 14:35:27 coyote daemon.info init: Starting pid 1147, console /dev/tty1: '/sbin/getty'
Aug 27 14:36:43 coyote auth.err getty: tty1: input overrun
Aug 27 14:36:53 coyote daemon.info init: Process '/sbin/getty 38400 tty1' (pid 1147) exited.  Scheduling it for restart.
Aug 27 14:36:53 coyote daemon.info init: Starting pid 1148, console /dev/tty1: '/sbin/getty'
Aug 27 14:38:08 coyote auth.err getty: tty1: input overrun
Aug 27 14:38:18 coyote daemon.info init: Process '/sbin/getty 38400 tty1' (pid 1148) exited.  Scheduling it for restart.
Aug 27 14:38:18 coyote daemon.info init: Starting pid 1149, console /dev/tty1: '/sbin/getty'
Aug 27 14:39:34 coyote auth.err getty: tty1: input overrun
Aug 27 14:39:44 coyote daemon.info init: Process '/sbin/getty 38400 tty1' (pid 1149) exited.  Scheduling it for restart.
Aug 27 14:39:44 coyote daemon.info init: Starting pid 1150, console /dev/tty1: '/sbin/getty'
Aug 27 14:41:00 coyote auth.err getty: tty1: input overrun
Aug 27 14:41:10 coyote daemon.info init: Process '/sbin/getty 38400 tty1' (pid 1150) exited.  Scheduling it for restart.
Aug 27 14:41:10 coyote daemon.info init: Starting pid 1151, console /dev/tty1: '/sbin/getty'
Aug 27 14:42:25 coyote auth.err getty: tty1: input overrun
Aug 27 14:42:35 coyote daemon.info init: Process '/sbin/getty 38400 tty1' (pid 1151) exited.  Scheduling it for restart.
Aug 27 14:42:35 coyote daemon.info init: Starting pid 1152, console /dev/tty1: '/sbin/getty'
Aug 27 14:43:51 coyote auth.err getty: tty1: input overrun
Aug 27 14:44:01 coyote daemon.info init: Process '/sbin/getty 38400 tty1' (pid 1152) exited.  Scheduling it for restart.
Aug 27 14:44:01 coyote daemon.info init: Starting pid 1153, console /dev/tty1: '/sbin/getty'
Aug 27 14:45:16 coyote auth.err getty: tty1: input overrun
Aug 27 14:45:26 coyote daemon.info init: Process '/sbin/getty 38400 tty1' (pid 1153) exited.  Scheduling it for restart.
Aug 27 14:45:26 coyote daemon.info init: Starting pid 1154, console /dev/tty1: '/sbin/getty'
Aug 27 14:46:42 coyote auth.err getty: tty1: input overrun
Aug 27 14:46:52 coyote daemon.info init: Process '/sbin/getty 38400 tty1' (pid 1154) exited.  Scheduling it for restart.
Aug 27 14:46:52 coyote daemon.info init: Starting pid 1155, console /dev/tty1: '/sbin/getty'
Aug 27 14:48:07 coyote auth.err getty: tty1: input overrun
Aug 27 14:48:17 coyote daemon.info init: Process '/sbin/getty 38400 tty1' (pid 1155) exited.  Scheduling it for restart.
Aug 27 14:48:17 coyote daemon.info init: Starting pid 1156, console /dev/tty1: '/sbin/getty'
Aug 27 10:54:27 coyote daemon.info thttpd[1144]: spawned CGI process 1157 for file 'cgi-bin/index.cgi'
Aug 27 10:59:20 coyote daemon.info thttpd[1144]: spawned CGI process 1357 for file 'cgi-bin/diags.cgi'
Aug 27 10:59:25 coyote daemon.info thttpd[1144]: spawned CGI process 1421 for file 'cgi-bin/diags.cgi'

蓝雨紫雨

这个问题我也遇到过

DreamCat

coyote daemon.info init: Starting pid 1149, console /dev/tty1: '/sbin/getty'
coyote auth.err getty: tty1: input overrun

和网络相关的看不出来。不过频繁出现的这个信息有问题。