|
发表于 2013-1-2 21:43:07
|
显示全部楼层
What's new in 6.0rc6 (2012-Dec-21 12:20):
*) fixed problem - netinstall for x86 did not work;
*) lcd - added take-screenshot command;
*) lcd - fixed calibration, fresh boards no longer require recalibration;
*) optimize memory usage - makes 32Mb routerboards more stable;
*) support BandRich modems with newer firmware;
*) ipsec - authentication using certificate store but without CRL checking for now;
*) added feature - flash can be partitioned on routerboards and
separate versions can be installed on each of them (requires latest firmware);
*) fixed problem - after restoring backup, it gets restored again on every reboot;
*) improved router performance when dhcp client/server present in system;
*) fixed vlan on bond after reboot;
*) fixed occasional queue kernel crash;
What's new in 6.0rc5 (2012-Dec-05 15:22):
*) wireless - advanced rate selection is the only method supported;
*) ssh client - support keyboard-interactive authentication;
*) fix simple queue config upgrade;
What's new in 6.0rc4 (2012-Nov-28 17:16):
*) dhcp server - added two radius string options (24, 25) for use in custom dhcp options;
*) fixed problem - ppp dial-on-demand did not work, it allways dialed in;
*) fixed problem - password was not saved when adding new user;
*) added feature - show last-logged-in in users list;
*) snmp - fix interface table;
*) dhcp ipv6 - added comment fields;
*) dhcp client ipv6 - add/remove default route or ntp server without renew when settings change;
*) ppp clients - set up dns dynamic-servers instead of static ones;
*) fixed problem - Connect button did not work in wireless scanner;
*) dhcp server - added radius framed route support;
*) fixed problem - MetaROUTERs did not work on PowerPC boards (RB800, RB1000, RB1100);
*) fixed problem - check-for-updates stopped working if it didn't find new updates
previously;
*) dhcp ipv6 - added dns option support;
*) gre - support all protocol encapsulation, not just ip and ipv6;
What's new in 6.0rc3 (2012-Nov-09 12:59):
*) fixed problem - MetaROUTERs did not work on RB2011s;
*) fixed problem - Realtek 1Gbit ethernet cards did not work;
*) added "/ip settings" menu with following settings:
ip-forward, send-redirects, accept-source-route, accept-redirects,
secure-redirects, rp-filter, tcp-syncookies;
*) fix some ipv6 firewall matchers;
*) improved performance for eoip,eoipv6,gre,gre6 tunnels, especially on multi core;
*) /queue tree entries with parent=global are performed separately from /queue simple and before /queue simple;
*) snmp - fixed missing OIDs;
What's new in 6.0rc2 (2012-Oct-24 11:27):
*) added generic fast path support on certain interfaces
(all ethernets on RB3xx, RB6xx, RB7xx, RB8xx, RB9xx, RB1000, RB11xx, RB2011);
*) added ipv4 fast path, it doubles ipv4 forwarding performance
on supported interfaces when no firewall, conntrack, queues.
*) added traffic generator fast path;
*) addedbridge fast path;
More info on fast path: http://wiki.mikrotik.com/wiki/Manual:Fast_Path
What's new in 6.0rc1 (2012-Sep-26 14:56):
*) i386 - increased number of supported cores to 64;
*) userman - fix unpaid profile activation while authenticating;
*) dhcp client - custom options;
*) dhcp options - allow mixing different data types;
*) console - "export compact" now is the default, use "export verbose" to get
previous behaviour;
*) ntp - make it work again;
*) tftpd - if real-file is a existing directory then prefix request with it;
*) RB333 ethernets are back;
*) dns - rotate servers only on failure;
*) fix M3P (/ip packing);
What's new in 6.0beta3 (2012-Aug-22 12:12):
*) installation - use much less space in storage (works well with 32MiB flash);
*) routerboard package is now merged with system package;
*) userman - use corresponding time zone data when showing date in console;
*) gps - init-string option;
*) ipsec - kill phase1 if ipsec-sa in responder expires due to system time change;
*) ipsec - rekey phase1 before expiration;
*) ipsec - when last ISAKMP-SA is deleted for the remote host remove related IPSec-SAs;
*) ipsec - send delete IPSec-SAs on shutdown/reboot;
*) user manager - fix user's active profile end time if it has unlimited validity,
these users now won't be hidden from reports when date filters are in effect;
*) certificate validity is shown using local timezone offset;
*) fixed queue bit rate reporting;
*) fixed ipv6 firewall;
*) upgraded drivers and kernel (to linux-3.3.5);
*) added priority matcher to firewall;
*) added change-dscp from-priority and from-priority-to-high-3-bits options;
*) fixed router crash or hang when rebooting;
*) add snif-tzsp,snif-pc actions to ip/ipv6 firewall mangle;
*) traffic-generator improvements for multi core;
What's new in 6.0beta2 (2012-Apr-24 10:57):
*) "/ip address set" and "/ipv6 address set" commands did not work properly; (2012-apr-16 14:26):
*) fix eoipv6 tunnels, tunnel-ids in packets were shuffled;
*) fix dynamic simple queues;
*) fix /ipv6 firewall connection-state matcher, was crashing router;
*) fix traffic generator, was crashing router when generating traffic on bonding interface;
*) fix wds interfaces;
*) downgrading to v5 was losing wireless interface configuration;
*) fix queue byte and rate statistics;
*) fix ethernet port order on all boards;
What's new in 6.0beta1 (2012-Apr-13 15:26):
*) updated drivers and kernel (to linux-2.6.38.2);
*) improved interface management (scales well for up to thousands of interfaces and more);
*) improved queue management (/queue simple and /queue tree) - easily handles tens
of thousands of queues;
*) improved overall router performance when simple queues are used -
at least double the performance of v5, even bigger improvements on multicore systems;
*) very small overhead for packets that miss simple queues,
but simple queues are present in the system;
*) pcq queue is NAT aware (just like "/queue simple" and "/ip traffic-flow";
*) in "/ip firewall mangle" can specify "new-priority=from-dscp-high-3-bits";
*) new default queue types: pcq-download-default and pcq-upload-default;
*) simple queues have separate priority setting for download/upload/total;
*) slave flag shows up for interfaces that are in bridge,bonding or switch group;
*) global-in, global-out, global-total parent in /queue tree is
replaced with global that is equivalent to global-total in v5;
*) simple queues happen in different place - at the very end of
postrouting and local-in chains;
*) simple queues target-addresses and interface parameters are joined into one
target parameter, now supports multiple interfaces match for one queue;
*) simple queues dst-address parameter is changed to dst and now supports
destination interface matching;
*) dns cache logs requests to topics "dns" and "packet"; |
|