mono为什么规则不能够生效??

snake@zhun

请教大家一个问题,我安装好了MONO以后,想开通外网到外网口IP的PING ,规则做了,但是死活PING不通,而且在防火墙日志里面,不停的出现,我外网IP发到外网口的IP的PING包被阻截!!请教各位高手!!拜托!!!!

snake@zhun

同志们,我找到原因了,不知道大家以前注意过没有!在WAN口设置里面,最下面有个勾选项就是这个Block private networksWhen set, this option blocks traffic from IP addresses that are reserved for privatenetworks as per RFC 1918 (10/8, 172.16/12, 192.168/16) as well as loopback addresses(127/8). You should generally leave this option turned on, unless your WAN network lies in such a private address space, too.如果你是选择WAN口是静态IP的话,你就需要把勾勾去掉!不然你的防火墙的WAN口死活是不能够访问的!!而且你做的DNAT也不能够使用!  请大家注意!!

analyst

QUOTE
Block private networks
这句的意思是屏蔽私有网络地址