ROS能否以域名方式指定上某网站？

crc8

因为只想开通Teamviwer服务，让外网连接内网。不让上网，但好像Teamviwer要用到80服务之类啊。

如：

1. *.teamviewer.com
   
2. *.dyngate.com

复制代码

在ros里如何设置只允许以上网站通过呢？要以域名方式，以目标为IP方式似乎不太适合。。。


谢谢

jt00278

自己写L7吧……

cool525000

我也希望ROS里面有域名的lists啊,而不仅仅是add lists..

jt00278

去给官方提议吧……

crc8

bobwalker 发表于 2011-5-17 15:55

                               
登录/注册后可看大图

可以实现，都过程复杂。
推荐使用另一种方法：因为teamviewer也支持IP直接访问(不是通过ID),所以对指定的机 ...

但因为终端用户位于两层路由之后了，不知道要如何搞？

即。。。Internet--------------路由器A---------------路由器B-----------------------用户机A，B，C，D。

crc8

jt00278 发表于 2011-5-18 03:35

                               
登录/注册后可看大图

去给官方提议吧……

有人提过了，官方的回应如下：

Thank you for your message.

Unfortunately, we do not have a fixed IP-Range of our Servers. Our network is very dynamic and constantly growing; therefore, it wouldn't make any sense to deploy a list of our IP-Addresses.

However, there are 2 options to unblock TeamViewer:

1. General unlocking of Port 5938 TCP for outgoing connections. (recommended)

Port 5938 is only used by a few programs and therefore is no security risk. This traffic should then neither be filtered nor cached.

2. Unlocking of URLs of the following formats (to any Server)

GET /din.aspx?s=…&client=DynGate…
GET /dout.aspx?s=…&client=DynGate…
POST /dout.aspx?s=…&client=DynGate…

Independent from the chosen method:
Please also check that no content filter or similar is blocking one of the following URLs:
*.teamviewer.com
*.dyngate.com

If you have any further questions please do not hesitate to contact us.

deng198896125

NHT转过去不就完了吗