|
发表于 2010-6-24 13:55:49
|
显示全部楼层
pix802 升级说明书明确说了,不支持
System Requirements
The sections that follow list the system requirements for operating a security appliance.
Note The PIX 501, PIX 506/506E, and PIX 520 security appliances are not supported in software
Version 8.0(2).
Memory Requirements
If you are using a PIX 515/515E running PIX Version 6.2/6.3, you must increase your memory before
upgrading to PIX Version 8.0(2). This version requires at least 64 MB of RAM for Restricted (R) licenses
and 128 MB of RAM for Unrestricted (UR) and Failover (FO) licenses. Table 1 lists the default value for
the memory that ships with each security appliance and flash memory requirements for Version 8.0(2).
For more information about minimum memory requirements, see the “Minimum Memory
Requirements” section in the Guide for Cisco PIX 6.2 and 6.3 Users Upgrading in Cisco PIX Software
Version 7.0.
Software Requirements
Version 8.0(2) requires the following:
• The minimum software version required before upgrading to PIX Version 8.0(2) is PIX Version 7.2.
If you are running a PIX version earlier than Version 6.2, you must first upgrade to PIX Version 6.2
or PIX Version 6.3 before you can upgrade to PIX Version 7.2.
• To upgrade your PIX software image, go to the following website:
http://www.cisco.com/public/sw-center/index.shtml
• For information on specific licenses supported on each model of the security appliance, go to the
following website: http://www.cisco.com/en/US/docs/ ... ense/license80.html
Table 1 Default Memory Shipped and Flash Memory Requirements
PIX Security Appliance Model Default Memory (MB) Flash Memory Required (MB)
515/515E 64 16
525 128
535 512 |
|