BrazilFW 3.0 出来了

LanTian

Ready to use:

      ** WebAdmin safe acess with SSL protocol
      ** NTP Server
      ** Bind Server (DNS Server)
      ** Squid 3.0
      ** QOS
      ** Sub-Nets
      ** New Conntrack Automatic Calculation:
            With new calculation, now it's possible 1.652 connections approximately for MB RAM instaled.** DHCP Server to use in networks and subnetworks


:arrow: Pendencies - Upcoming features:

      ** Merge IP Adress with MAC Adress as control mesure system.
      ** Wireless Network configuration
      ** GSM
      ** Load Balance
      ** Port Forwarding
      ** DansGuardian
      ** Sarg
      ** New GUI for WebAdmin
      Note: not exactly in this order

BrazilFW 3.0 System Requirements

==> BrazilFW 3.0 - Minimum supported system requirements:

      Pentium 233 MHZ Processor and 128 of system memory.
      Howevet, is highly recommendablem a computer with at least "Pentium III 500 MHZ" and 256 of system memory.
      Note: Attention!, if you use a PC with IGP (Graphics Processing Unit) integrated on board, possibly the system memory avaliable to be used for brazilfw, can decrease.


==> Additional requirements:

      ** NICs
      ** Hubs or switchs
      ** Cable
      ** Access Points, Antennas, other hardware...

      *** Please, check if the items above are in good conditions and were properly installed.
      *** Avoid using low quality cables, too prevent the reuse cables, because these can be in a bad state.
      *** Avoid using low quality nics, (i.e. SIS900).
      *** The above advices, help us to have a fast and reliable network.

Download BrazilFW 3.0:
http://brazilfw.com.br/users/woshman/bt/brazilfw.iso

3.0的安装教程可以参考：
http://www.brazilfw.com.br/forum/viewtopic.php?f=5&t=67480

fuger

早就出来了，我懒得搞而已。

tiaoti

学习学习～！

michaelyuan

不错不错

huangyi8

不知道我够不够，试试看～

374533905

楼主威武值得我们好好学习下