脚本

xujia1108

:local assign-address
:local new-address
:local status
:local x
:set x 2
:for i from=1 to=$x do={
    :set status [/interface get [/interface find  name=("pppoe-out" . $i)] running]
    :if ($status=true) do={
     :set new-address [/ip address get [/ip address find dynamic=yes interface=("pppoe-out" . $i)] address]
     :set new-address [:pick $new-address 0 ([:len $new-address] -3)]
     :set assign-address [/ip address get [/ip address find dynamic=no interface=("pppoe-out" . $i)] address]
     :set assign-address [:pick $assign-address 0 ([:len $assign-address] -3)]
        :if ($assign-address != $new-address) do={ /ip address set [/ip address find comment=$i] address=$new-address network=$new-address broadcast=$new-address
        /ip route set [/ip route find comment=$i] gateway=$new-address
        /ip fir nat set [/ip fir nat find comment=$i] to-addresses=$new-address
        /ip route set [/ip route find comment=$i] gateway=$new-address
       }
   }
}


这个是用生成器生成的动态刷新脚本，:set x 2 这是不是订议了两条线啊，如果是4条用不用修改一下啊。麻烦高手讲解一下

zooyo

请多看看教程，我已经在3.20的脚本使用中讲了具体情况.

xujia1108

贴子的联接是多少啊。麻烦发给我看下