ROS 3.18发布了，终于修复了某些X86上的时钟问题

专卖精品 · 发表于 2009-1-10 13:22:51

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？注册

×

What's new in 3.18:

*) IPv6 address auto-configuration: added recursive DNS server option;
*) fixed problem - sometimes firewall did not work after reboot on RB1xx;
*) do not send IPv6 packets over PPTP, L2TP or PPPoE - could confuse some
servers or clients;
*) allow queues to have all traffic, not only ip (for example vpn);
*) added ability to specify dns name in bandwidth test in WinBox;
*) fixed problem - sometimes RB1xx (and RB4xx) could not start up or startup was very long;
*) improved ipv6 sniffing;
*) improve torch and sniffer behavior under high load;
*) improved queue statistics;
*) fix xen make-routeros-image command;
*) fix potential wireless crash under load when negotiating encryption;
*) fix several MPLS issues in mpls-test;
*) fixed support for Novatel Wireless Ovation MC950D HSUPA;
*) fixed some bugs in routing-test OSPF;
*) added support for D-Link DUB-E100 USB Ethernet adapter;
*) fixed user-manager database rebuild command to succeed in case of
malformed database disk image;
*) sms - added descriptions for error codes;
*) sms - added automatic 'smsc' (service centre address) value detection,
to work around first time error when sending SMS without specifying
an 'smsc' value;
*) fixed - during uptime 4:20 .. 5:00 interface traffic (byte and packet
count) was being reported 100 times larger than the actual value;
*) provide L2TP server address in Called-Station-Id when doing authentication over radius;
*) added support for Sierra Wireless MC8790;
*) recalibrated noise floor adjustment for R5H;
*) updated drivers & kernel - fixed fast clock issue on x86;

zhangying · 发表于 2009-1-10 17:33:54

我还不敢急着升级，等一段时间再说，精品兄好像离我很近哦

cracks · 发表于 2009-1-10 18:16:48

本帖最后由 cracks 于 2009-1-10 18:24 编辑

大家离的都很近的...

在用3.xx版时,目前到 3.18版本,大家注意不要安装xen虚拟模块,

不然在x86的pc机会造成不能正常reboot系统..........

大家可以实际测试一下,安装了xen包的..你在本机或是远程reboot测试,,,,看能否正常从启动

mikrotik ros 3.18

墨迹 · 发表于 2009-1-10 18:51:16

http://www.mikrotik.com/download/mikrotik-3.18.iso
http://www.mikrotik.com/download/all_packages-x86-3.18.zip

ros1981 · 发表于 2009-1-10 20:08:52

这个东西要付费的哦，第一次使用，还望多指教。

benben418 · 发表于 2009-1-11 01:49:02

修复了不少东西，现在还不敢试啊，被晃点了N次了。。。。

专卖精品 · 发表于 2009-1-11 09:59:43

*) added support for Sierra Wireless MC8790

这是个支持WCDMA、GSM等的3频段网卡

soft_route · 发表于 2009-1-11 10:33:44

感觉装了xen虚拟模块后启动慢了好多。

janlovewen · 发表于 2009-1-12 13:46:16

pppoe?!~~有没有问题?!~~

benben418 · 发表于 2009-1-13 02:57:05

SHIT！！！！！！！！ROS是没救了，打死也不改。。。在我的双U上还是时间跑的跟飞的似的。。。哪个闲着没事的再来和我探讨一下相对论的问题吧。。。

haifengcn · 发表于 2009-1-14 22:36:03

哈哈。慢慢测试小心。内核继续出错。

账号		自动登录	找回密码
密码			注册

[其它] ROS 3.18发布了，终于修复了某些X86上的时钟问题

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。