ROS最新版3.15已发布！！！

wbyz20

What's new in 3.15:

*) added workaround for non-standards compliant CPE with timestamp issue;
*) added ability to manage multiple disks & stores under /store;
*) added support for storing user-manager database on secondary media via /store;
*) /store should be used to set up secondary disk as web proxy cache;
*) added support for Mesh in WinBox;
*) fixed client roaming in mesh protocol;
*) fixed bug in MME routing protocol:
   routes sometimes were lost from routing table;
*) fixed some bugs in routing-test;
*) fixed traffic forwarding when VRF (virtual routing and forwarding) is used;
*) fixed problem - USB did not work on Geode LX boards;
*) fixed problem - farsync cards did not negotiate links;
*) added support for Novatel EU870D;
*) added support for Intel 82575EB & 8257GB gigabit ethernet PCI-Express cards;
*) removed support for all synchronous cards but farsync;
*) graphing - all target (source) addresses displayed in queue statistics page;
*) bridge firewall broute table is removed - it did not work as expected anyway;
*) ingress-priority matcher added to bridge firewall
*) fixed use-dns property of console traceroute command, default now is
    use-dns=no;
*) updated UK 5.8 FIXED regulatory domain info;
*) /system ssh now by default uses name of logged in user instead of "admin";
*) fixed support for some microsD cards on RB400;
*) include Relay-Session-ID in packets sent by PPPoE client if required;
*) added ability to specify src. address for radius client;
*) dns cache - improved static entry behavior;
*) fixed dial-on-demand on ppp interfaces;

wbyz20

本人已更新，这个版本官方测试了好久才发出来，应试不会出现用３。１２那样的ＢＵＧ　　　不过大家安装的时候一定要注意，安装包。全部安装有可以导致死机。本人就遇到过。。。

lzzl551

要购买KEY吗，有破解版的吗

wbyz20

增加了mesh无线网络.军用技术的网络..

ksw520

很早就支持mesh 只能在终端下设置，只是这次更新 做上了winbox的mesh模块。
官方demo上测试了超过2周 中途修改过两次文件。

jgnik

fixed dial-on-demand on ppp interfaces
终于这个ok了

benben418

就知道会很快出3.15升级的，看3.14那些个极品BUG。。。不知道这个3.15是不是还会那样，越做越烂。。。

benben418

还好~~~~没再出现时间的BUG。。。

benben418

我靠！！！！！！！！！！！！！！！！！！
过了半个小时之后，又TMD时间出毛病了！！！！！！！！！！
还是和3.14一样，时间一下蹦10来秒，流量显示不正常，限速不正常。
承认败给它了，改回3.13去

专卖精品

我运行了9个小时了，没有发现任何问题

wbyz20

我也没有发现任何问题到现在有12个小时了.你自己配置问题,或者机器问题吧.我们都没有问题,就你有!!!

专卖精品

我估计他是用MAC地址来进行监控的

benben418

我从来都是WINBOX用IP登的，你们说我的配置问题或者机器问题，没升级之前是好好的，升级了就出了问题了，现在我把版本降回到3.11了，一点问题也没有了。。。这些BUG不一定是每个机器都出的，至少我这3台一样的机器，就有两台都出了这些问题，而有一台就一点问题没有。我还是认为是有BUG

ros1981

网址是多少？？偶第一次来。

网络-浪子

限速的流量显示有了么?