SOS!!同样的配置,双线同网关的均衡不行,不同网关的行!

luhong_1979

同样的配置,双线同网关的均衡不行,不同网关的行!但是我在VM里虚拟时同网关的可以的,换成真实的ADSL后就,这样了,同网关的不可以负载均衡,只有一条有流量还有一条好像有上传没下载. 但是不同网关的两条ADSL则可以负载均衡,配置都没有改,只是换了一条ADSL和ADSL的帐号.实在找不到问题了,请高手帮小弟看看,谢谢.
我在IP-ADDRESS里加了这个东东的address=network=broadcast    我头都搞大了,我这里只有一条ADSL的网关是不同的.详细的图和说明看请看附件的内容,谢谢

下面是自动修改相关路由.NAT和IP地址脚本

:global Default-routing

:local assign-address

:local new-address

:local status

:local X

:set x 2

:for i from=1 to=$x do={

:set status [/interface get [/interface find
name=("pppoe-out" . $i)] running]

:if ($status=true) do={

:set new-address [/ip address get [/ip address find dynamic=yes interface=("pppoe-out" . $i)] address]

:set new-address [:pick $new-address 0 ([:len $new-address] -3)]

:set assign-address [/ip address get [/ip address find dynamic=no interface=("pppoe-out" . $i)] address]

:set assign-address [:pick $assign-address 0 ([:len $assign-address] -3)]

:if ($assign-address != $new-address) do={ /ip address set [/ip address find dynamic=no interface=("pppoe-out" . $i)] address=$new-address network=$new-address broadcast=$new-address

/ip route set [/ip route find comment=$i] gateway=$new-address

/ip fir nat set [/ip fir nat find comment=$i] to-addresses=$new-address

:set Default-routing $new-address

/ip route set [/ip route find comment="Default-routing"] gateway=$new-address

}

}

}

PPPOE拨号设置我就不贴图了吧.两条ADSL的 “Add Default Route”前面的勾都去掉的.

[ 本帖最后由 luhong_1979 于 2008-4-29 12:22 编辑 ]

vitas333

同网关的肯定不行咯

qwert1388

同网关走IP

ee007

/..................

mjq9896

上面的图是adsl没有拨号的吧！

把两条同网关的adsl拨号后的ip router图发上来看看！

我已经3条成功了！在ROS2.9和3.7都已经成功！
ros3.7配置更简单！！！

janlovewen

/ip address set [/ip address find comment=("adsl" . $i)] address=$new-address network=$new-address broadcast=$new-address
同网关~~怎么没有这条呢?!~

foxjuly