|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有账号?注册
×
看了lovebird大大的双线adsl负载均衡配置过程,感觉受益非浅,马上按lovebird大大的方法试验了一个,非常不错,但有一个问题就是重启了ros之后,Router list可以自动更新IP,但在Firewall的NAT选项里的srcnat(ip伪装)两条的规则都无法自动更新IP,求教一下各位大大,到底是怎么回事?我的ROS是2.9.27的,在此感谢各位大大了!脚本就按网上的IP更新脚本!
:local assign-address
:local new-address
:local status
:local x
:set x 2
:for i from=1 to=$x do={
:set status [/interface get [/interface find name=("pppoe-out" . $i)] running]
:if ($status=true) do={
:set new-address [/ip address get [/ip address find dynamic=yes interface=("pppoe-out" . $i)] address]
:set new-address [:pick $new-address 0 ([:len $new-address] -3)]
:set assign-address [/ip address get [/ip address find dynamic=no interface=("pppoe-out" . $i)] address]
:set assign-address [:pick $assign-address 0 ([:len $assign-address] -3)]
:if ($assign-address != $new-address) do={ /ip address set [/ip address find comment=$i] address=$new-address network=$new-address broadcast=$new-address
/ip route set [/ip route find comment=$i] gateway=$new-address
/ip fir nat set [/ip fir nat find comment=$i] to-addresses=$new-address
/ip route set [/ip route find comment=$i] gateway=$new-address
}
}
[ 本帖最后由 bensonhb 于 2008-3-28 10:00 编辑 ] |
|