飞鱼星3200不支持845主板?

nethood

一直用810,815+P3 Cpu做路由,用的飞鱼星破解版
今天头脑发热,拿出一台845+P4 1.6 装了台路由
但是动态拨号怎么都不能跟电信建立起连接
测试了静态IP地址,所有功能都正常,就是不能用拨号
有没有同行遇到过这样的问题?

hantu

把网卡换个插槽看看

nethood

已在不动网卡不动的情况下使用静态IP地址测试过
路由工作是正常的
换拨号就不行了,拨不上号
跟网卡位置什么的应该是没关系

nethood

2007.6.29 25:7:18 192.168.0.20 Daemon.Warning  pppd[2695]:  Couldn't open pty slave /dev/pts/7: No such file or director
2007.6.29 25:7:18 192.168.0.20 Daemon.Info  pppd[2695]:  Serial connection established
2007.6.29 25:7:18 192.168.0.20 Daemon.Info  pppd[2695]:  Using interface ppp
2007.6.29 25:7:18 192.168.0.20 Daemon.Notice  pppd[2695]:  Connect: ppp0 <--> /dev/ttyp
2007.6.29 25:7:18 192.168.0.20 Daemon.Debug  pppoe[2821]:  PADS: Service-Name: '
2007.6.29 25:7:18 192.168.0.20 Daemon.Info  pppoe[2821]:  PPP session is 163
2007.6.29 25:7:18 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2818) exited.  Scheduling it for restart
2007.6.29 25:7:18 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:19 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2823) exited.  Scheduling it for restart
2007.6.29 25:7:19 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:20 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2824) exited.  Scheduling it for restart
2007.6.29 25:7:20 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:21 192.168.0.20 Daemon.Error  pppd[2695]:  PAP authentication faile
2007.6.29 25:7:21 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2825) exited.  Scheduling it for restart
2007.6.29 25:7:21 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:21 192.168.0.20 Daemon.Notice  pppd[2695]:  Connection terminated
2007.6.29 25:7:21 192.168.0.20 Daemon.Error  pppoe[2821]:  read (asyncReadFromPPP): Session 1632: Input/output erro
2007.6.29 25:7:21 192.168.0.20 Daemon.Info  pppoe[2821]:  Sent PAD
2007.6.29 25:7:22 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2826) exited.  Scheduling it for restart
2007.6.29 25:7:22 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty1' (pid 2809) exited.  Scheduling it for restart
2007.6.29 25:7:22 192.168.0.20 Daemon.Info  init:  ^MStarting pid 2858, console /dev/null: '/sbin/getty
2007.6.29 25:7:22 192.168.0.20 Auth.Error  getty:  /dev/tty1: cannot open as standard input: No such devic
2007.6.29 25:7:22 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:23 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2859) exited.  Scheduling it for restart
2007.6.29 25:7:23 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:24 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2860) exited.  Scheduling it for restart
2007.6.29 25:7:24 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:25 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2861) exited.  Scheduling it for restart
2007.6.29 25:7:25 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:26 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2862) exited.  Scheduling it for restart
2007.6.29 25:7:26 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:27 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2863) exited.  Scheduling it for restart
2007.6.29 25:7:27 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:28 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2864) exited.  Scheduling it for restart
2007.6.29 25:7:28 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:29 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2865) exited.  Scheduling it for restart
2007.6.29 25:7:29 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:30 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2866) exited.  Scheduling it for restart
2007.6.29 25:7:30 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:31 192.168.0.20 Daemon.Info  init:  ^MProcess '/sbin/getty 38400 tty2' (pid 2867) exited.  Scheduling it for restart
2007.6.29 25:7:31 192.168.0.20 Daemon.Info  init:  ^MBummer, can't open /dev/tty
2007.6.29 25:7:31 192.168.0.20 Daemon.Notice  pppd[2913]:  pppd 2.4.1 started by root, uid
2007.6.29 25:7:32 192.168.0.20 Daemon.Warning  pppd[2913]:  Couldn't open pty slave /dev/pts/0: No such file or director
2007.6.29 25:7:32 192.168.0.20 Daemon.Info  pppd[2913]:  Serial connection established
2007.6.29 25:7:32 192.168.0.20 Daemon.Info  pppd[2913]:  Using interface ppp
2007.6.29 25:7:32 192.168.0.20 Daemon.Notice  pppd[2913]:  Connect: ppp0 <--> /dev/ttyp
2007.6.29 25:7:32 192.168.0.20 Daemon.Debug  pppoe[2916]:  PADS: Service-Name: '
2007.6.29 25:7:32 192.168.0.20 Daemon.Info  pppoe[2916]:  PPP session is 163