分享（Linux LiveCD Router v1.9.2.iso）

cloudq

已经传到论坛Ftp具体资料参考http://wifi.com.ar

cloudq

mgd: commit completeSetting initial options:  debugger_on_panic=NO debugger_on_break=NO.Doing initial network setup: hostname.Initial interface configuration:fxp1: Multicast addr command failedadditional daemons: syslogd.checking for core dump...savecore: Router rebooting after a normal shutdown....Additional routing options:.Doing additional network setup:.Starting final network daemons:.setting ldconfig path: /usr/libstarting standard daemons: cron.Initial rc.i386 initialization: microcode kld.rc.i386 configuring syscons:.Local package initialization:.starting local daemons:.Tue Jul  6 21:58:07 GMT 2004Amnesiac (ttyd0)login: admi    root--- JUNOS 6.2R2.4 built 2004-03-19 13:39:35 UTCTerminal type? [vt100] HHHHHHHHHroot@% root@% root@% root@% cd /bootroot@% lsboot0                cdboot                loader                loader.help        pxebootboot1                defaults        loader.4th        loader.rc        support.4thboot2                kgzldr.o        loader.conf        mbrroot@% vi loaderchommod 77 7 loader.conf root@% cvi loader.conf      [?7h[?1h=                                                console="comconsole" kernel="/kernel" ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ loader.conf: unmodified: line 1  Usage: [[      cconsole="comconsole"coconsole="comconsole"conconsole="comconsole"condconsole="comconsole"cond Copying file for recovery...  cond D ~ckernel="/kernel"cokernel="/kernel"conkernel="/kernel"conskernel="/kernel"consokernel="/kernel"consolkernel="/kernel"consolekernel="/kernel" =kernel="/kernel"    "kernel="/kernel"    vkernel="/kernel"    ikernel="/kernel"    dkernel="/kernel"    ckernel="/kernel"    okernel="/kernel"    nkernel="/kernel"    skernel="/kernel" okernel="/kernel" lkernel="/kernel" ekernel="/kernel" "kernel="/kernel"    kernel="/kernel" :wqloader.conf: 2 lines, 38 characters[?1l>D  .     [?1l>root@% cliroot> set           ^syntax error, expecting .root> ex      configure Entering configuration mode[edit]root# ser      ^unknown command.root# ser         ^unknown command.root# ser      ?Possible completions:  set                  Set a parameter[edit]root# se         show ver              ^syntax error.[edit]root# exit sExiting configuration moderoot> show version Model: oliveJUNOS Base OS boot [6.2R2.4]JUNOS Base OS Software Suite [6.2R2.4]JUNOS Kernel Software Suite [6.2R2.4]JUNOS Packet Forwarding Engine Support (M20/M40) [6.2R2.4]JUNOS Routing Software Suite [6.2R2.4]JUNOS Online Documentation [6.2R2.4]root> show version Model: oliveJUNOS Base OS boot [6.2R2.4]JUNOS Base OS Software Suite [6.2R2.4]JUNOS Kernel Software Suite [6.2R2.4]JUNOS Packet Forwarding Engine Support (M20/M40) [6.2R2.4]JUNOS Routing Software Suite [6.2R2.4]JUNOS Online Documentation [6.2R2.4]root> ?Possible completions:  clear                Clear information in the system  configure            Manipulate software configuration information  file                 Perform file operations  help                 Provide help information  monitor              Show real-time debugging information  mtrace               Trace multicast path from source to receiver  ping                 Ping remote target  quit                 Exit the management session  request              Make system-level requests  restart              Restart software process  set                  Set CLI properties, date/time, craft interface message  show                 Show system information  ssh                  Start secure shell on another host  start                Start shell  telnet               Telnet to another host  test                 Perform diagnostic debugging  traceroute           Trace route to remote hostroot>    show firewall Filter: __default_bpdu_filter__                                root> file                configure Entering configuration mode[edit]root# ?Possible completions:              Execute this command  activate             Remove the inactive tag from a statement  annotate             Annotate the statement with a comment  commit               Commit current set of changes  copy                 Copy a statement  deactivate           Add the inactive tag to a statement  delete               Delete a data element  edit                 Edit a sub-element  exit                 Exit from this level  help                 Provide help information  insert               Insert a new ordered data element  load                 Load configuration from ASCII file  quit                 Quit from this level  rename               Rename a statement  rollback             Roll back to previous committed configuration  run                  Run an operational-mode command  save                 Save configuration to ASCII file  set                  Set a parameter  show                 Show a parameter  status               Show users currently editing configuration  top                  Exit to top level of configuration  up                   Exit one level of configuration---(more 95%)---                      wildcard             Wildcard operations[edit]root#    f      ^unknown command.root# f   i      ^unknown command.root# fi         ?Possible completions:              Execute this command  activate             Remove the inactive tag from a statement  annotate             Annotate the statement with a comment  commit               Commit current set of changes  copy                 Copy a statement  deactivate           Add the inactive tag to a statement  delete               Delete a data element  edit                 Edit a sub-element  exit                 Exit from this level  help                 Provide help information  insert               Insert a new ordered data element  load                 Load configuration from ASCII file  quit                 Quit from this level  rename               Rename a statement  rollback             Roll back to previous committed configuration  run                  Run an operational-mode command  save                 Save configuration to ASCII file  set                  Set a parameter  show                 Show a parameter  status               Show users currently editing configuration  top                  Exit to top level of configuration  up                   Exit one level of configuration---(more 95%)---                      wildcard             Wildcard operations[edit]root#     run ?Possible completions:  clear                Clear information in the system  file                 Perform file operations  monitor              Show real-time debugging information  mtrace               Trace multicast path from source to receiver  ping                 Ping remote target  quit                 Exit the management session  request              Make system-level requests  restart              Restart software process  set                  Set CLI properties, date/time, craft interface message  show                 Show system information  ssh                  Start secure shell on another host  start                Start shell  telnet               Telnet to another host  test                 Perform diagnostic debugging  traceroute           Trace route to remote host[edit]root# run                set firewall ?Possible completions:+ apply-groups         Groups from which to inherit configuration data+ apply-groups-except  Don't inherit configuration data from these groups> family               Protocol family> filter               Define an IPv4 firewall filter> policer              Policer template definition[edit]root# set firewall       policer ?Possible completions:         Policer name[edit]root# set firewall policer                                                                   show interfaces fxp0 {    unit 0 {        family inet {            address 10.37.144.18/24;        }    }}[edit]root# ei      ^unknown command.root# ei      dit ?Possible completions:> access               Network access configuration> accounting-options   Accounting data configuration> applications         Define applications by protocol characteristics> chassis              Chassis configuration> class-of-service     Class-of-service configuration> firewall             Define a firewall configuration> forwarding-options   Configure options to control packet sampling> groups               Configuration groups> interfaces           Interface configuration> logical-routers      Logical routers> policy-options       Routing policy option configuration> protocols            Routing protocol configuration> routing-instances    Routing instance configuration> routing-options      Protocol-independent routing option configuration> services             Service PIC applications settings> snmp                 Simple Network Management Protocol (SNMP) configuration> system               System parameters[edit]root# edit    services ?Possible completions:              Execute this command> adaptive-services-pics  Adaptive Services PIC daemon configuration> ids                  Configure the intrusion detection system> nat                  Configure Network Address Translation> service-set          Define a service set> stateful-firewall    Configure stateful firewall services  |                    Pipe through a command[edit]root# edit services    nat ?Possible completions:              Execute this command> pool                 Define a NAT pool> rule                 Define a NAT rule> rule-set             Defines a set of NAT rules  |                    Pipe through a command[edit]root# edit services nat                                                          rename                      exit Exiting configuration moderoot> re        ^'re' is ambiguous.Possible completions:  request              Make system-level requests  restart              Restart software processroot> re   u   qui      ^unknown command.root> requi      est ?Possible completions:  chassis              Perform chassis-specific operations  message              Send text message to other users  routing-engine       Log in to Routing Engine  services             Perform service application operations  support              Perform JUNOS support tasks  system               Perform system-level operationsroot> request    system ?Possible completions:  configuration        Request operation on system configuration  halt                 Halt the system  logout               Forcibly end user's CLI login session  partition            Partition storage media  reboot               Reboot the system  snapshot             Archive data and executable areas  software             Perform system software extension or upgraderoot> request system    reboot Reboot the system ? [yes,no] (no) yes shutdown: [pid 2525]Shutdown NOW!                                                                               *** FINAL System shutdown message from root@ ***                             System going down IMMEDIATELY                                                                                                                                                                                                                root> Jul  6 22:02:33 init: syslogd (PID 2059) exited with status=0 Normal ExitWaiting (max 60 seconds) for system process `bufdaemon' to stop...stoppedWaiting (max 60 seconds) for system process `syncer' to stop...stoppedsyncing disks... 4 3 1 doneUptime: 5m36sata0: Spinning down devices. Please wait...ata2: Spinning down devices. Please wait...Rebooting...Console: serial portBIOS drive C: is disk0BIOS 639kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(builder@iaculi.juniper.net, Fri Mar 19 13:30:21 GMT 2004)|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/Console: serial portBIOS drive C: is disk0BIOS 639kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(builder@cecrops.juniper.net, Thu Jul 24 02:09:25 GMT 2003)|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/kernel text=0x33b247 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x273d8+0x49c88 \|/-\|/-\|/-\|/-\|/-\syms=[0x4+0x3bb90|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+0x4+0x46cb7-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|]                    Loader Quick Help                     ----------------- The boot order is PCMCIA or floppy -> Flash -> Disk -> Lan -> back to PCMCIA or floppy. Typing reboot from the command prompt will cycle through the boot devices. On some models, you can set the next boot device using the nextboot command: nextboot compact-flash | diskFor more information, use the help command: help   Hit [Enter] to boot immediately, or space bar for command prompt.Booting [kernel] in 9 seconds... Booting [kernel] in 8 seconds... Booting [kernel]...               /-\|/-\|Copyright ?1996-2001, Juniper Networks, Inc.All rights reserved.Copyright ?1992-2001 The FreeBSD Project.Copyright ?1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994        The Regents of the University of California. All rights reserved.JUNOS 6.0R1.3 #0: 2003-07-24 02:20:37 UTC    builder@cecrops.juniper.net:/build/cecrops-d/6.0R1.3/obj-i386/sys/compile/JUNIPERTimecounter "i8254"  frequency 1193182 HzTimecounter "TSC"  frequency 349180821 HzCPU: Pentium II/Pentium II Xeon/Celeron (349.18-MHz 686-class CPU)  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2  Features=0x183f9ffreal memory  = 268435456 (262144K bytes)sio0: gdb debugging portavail memory = 255840256 (249844K bytes)Olive CPUPreloaded elf kernel "kernel" at 0xc0531000.DEVFS: ready for devicesPentium Pro MTRR support enabledmd0: Malloc disknpx0:  on motherboardnpx0: INT 16 interfacepcib0:  on motherboardpci0:  on pcib0pcib1:  at device 1.0 on pci0pci1:  on pcib1pci1:  at 0.0 irq 11fxp0:  port 0x2000-0x201f mem 0x40100000-0x401fffff,0x40200000-0x40200fff irq 11 at device 10.0 on pci0fxp1:  port 0x2060-0x207f mem 0x42000000-0x420fffff,0x42100000-0x42100fff irq 11 at device 14.0 on pci0isab0:  at device 20.0 on pci0isa0:  on isab0atapci0:  port 0x2040-0x204f at device 20.1 on pci0ata0: at 0x1f0 irq 14 on atapci0pci0:  at 20.2 irq 11smb0:  port 0xfc00-0xfc0f at device 20.3 on pci0fdc0:  at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0ata2 at port 0x170-0x177,0x376 irq 15 on isa0atkbdc0:  at port 0x60,0x64 on isa0atkbd0:  flags 0x1 irq 1 on atkbdc0psm0:  irq 12 on atkbdc0psm0: model IntelliMouse, device ID 3vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0sc0:  at flags 0x100 on isa0sc0: VGA sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0sio0: type 16550A, consolesio1: configured irq 5 not in bitmap of probed irqs 0sio2 at port 0x2f8-0x2ff irq 3 on isa0sio2: type 16550Asio3: configured irq 7 not in bitmap of probed irqs 0fxp0: Ethernet address 00:08:c7:81:44:d7fxp1: Ethernet address 00:a0:c9:75:bc:6eDEVFS: ready to runad0: 1547MB  [3145/16/63] at ata0-master using PIO3ata2-slave:  CDROM device - NO DRIVER!Mounting root from ufs:/dev/ad0s1aMounted jbase package on /dev/vn0...Mounted jkernel package on /dev/vn1...Mounted jpfe package on /dev/vn2...Mounted jdocs package on /dev/vn3...Mounted jroute package on /dev/vn4...swapon: adding /dev/ad0s1b as swap deviceAutomatic reboot in progress.../dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1a: clean, 82937 free /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1e: clean, 12116 free (49 frags, 10361 blocks, 0.0% fragmentation)(20 frags, 1512 blocks, 0.2% fragmentation)(49 frags, 10361 blocks, 0.0% fragmentation)/dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1f: clean, 954176 free (160 frags, 119252 blocks, 0.0% fragmentation)tunefs: soft updates setmgd: error: Cannot stat configuration file: /config/juniper.confWarning: Commit failed, activating partial configuration.Warning: Edit the router configuration to fix these errors.cp: /var/db/juniper.db: No such file or directorySetting initial options:  debugger_on_panic=NO debugger_on_break=NO.Doing initial network setup: hostname.Initial interface configuration:additional daemons: syslogd.Additional routing options:.Doing additional network setup:.Starting final network daemons:.setting ldconfig path: /usr/libstarting standard daemons: cron.Initial rc.i386 initialization:.rc.i386 configuring syscons:.Local package initialization:.starting local daemons:.Tue Jul  6 23:25:37 GMT 2004Jul  6 23:25:37   dcd[1972]: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryJul  6 23:25:37 init: process_mode mode=BOTH cmd=internal-routing-service master_mode=-1 Jul  6 23:25:42 Amnesiac (ttyd0)login: Jul  6 23:25:46 init: mib-process (PID 2120) startedJul  6 23:25:46   snmpd[1978]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:47   snmpd[1978]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database         Could not open configuration database Jul  6 23:25:47   snmpd[1978]: SNMPD_CONFIG_ERROR: Configuration database has errorsJul  6 23:25:47   snmpd[1978]: SNMPD_TRAP_COLD_START: trap_generate_cold: SNMP trap: cold start Jul  6 23:25:48   chassisd[1973]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:48   chassisd[1973]: CHASD_DDL_ACCESS_ERROR: can't open ddl Could not open configuration database Jul  6 23:25:48   chassisd[1973]: CHASSISD_CONFIG_INIT_ERROR: Problems with configuration file '/var/etc/chassisd.conf'; using defaults Jul  6 23:25:49   lmpd[2128]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:49   lmpd[2128]: LMPD_PARSE_ERROR: [edit protocols link-management]   Configuration database open failure: Could not open configuration database  Jul  6 23:25:50   /usr/sbin/sampled[2124]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:50   dfwd[1986]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:50   fsad[2130]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:50   fsad[2130]: FSAD_CONFIG_ERROR: Reason:   'Opening configuration database'     Could not open configuration database  Jul  6 23:25:50   /usr/sbin/sampled[2124]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Jul  6 23:25:50   /usr/sbin/sampled[2124]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:50   /usr/sbin/sampled[2124]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Jul  6 23:25:50   /usr/sbin/sampled[2124]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:50   /usr/sbin/sampled[2124]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Jul  6 23:25:51   cosd[2126]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:51   cosd[2126]: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Jul  6 23:25:51   mib2d[2120]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:51   mib2d[2120]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database         Could not open configuration database Jul  6 23:25:51   mib2d[2120]: MIB2D_CONFIG_CHECK_FAILED: main: configuration database has errorsJul  6 23:25:52   rpd[2121]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Configuration database open failure: Could not open configuration database Jul  6 23:25:53   dcd[2132]: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryJul  6 23:25:53   dcd[2132]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:53   dcd[2132]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Jul  6 23:25:54   lmpd[2134]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:54   lmpd[2134]: LMPD_PARSE_ERROR: [edit protocols link-management]   Configuration database open failure: Could not open configuration database  Jul  6 23:25:55   dfwd[2135]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:56   last message repeated 2 timesJul  6 23:25:56   /usr/sbin/sampled[2138]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:56   /usr/sbin/sampled[2138]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Jul  6 23:25:56   /usr/sbin/sampled[2138]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:56   /usr/sbin/sampled[2138]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Jul  6 23:25:56   /usr/sbin/sampled[2138]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:56   /usr/sbin/sampled[2138]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Jul  6 23:25:56   cosd[2139]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:56   cosd[2139]: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Jul  6 23:25:57   rpd[2140]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Configuration database open failure: Could not open configuration database Jul  6 23:25:58   dcd[2141]: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryJul  6 23:25:58   dcd[2141]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:58   dcd[2141]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Jul  6 23:25:58   init: interface-control is thrashing, not restartedJul  6 23:25:59   init: ntp is thrashing, not restartedJul  6 23:25:59   lmpd[2143]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:25:59   lmpd[2143]: LMPD_PARSE_ERROR: [edit protocols link-management]   Configuration database open failure: Could not open configuration database  Jul  6 23:26:00   init: helper is thrashing, not restartedJul  6 23:26:01   /usr/sbin/sampled[2147]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:26:01   /usr/sbin/sampled[2147]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Jul  6 23:26:01   cosd[2148]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:26:01   /usr/sbin/sampled[2147]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:26:01   cosd[2148]: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Jul  6 23:26:01   /usr/sbin/sampled[2147]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Jul  6 23:26:01   /usr/sbin/sampled[2147]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:26:01   /usr/sbin/sampled[2147]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Jul  6 23:26:02   rpd[2149]: UI_CONFIGURATION_ERROR: Process: , path: , statementAmnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Jul  6 23:26:04   lmpd[2152]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:26:04   lmpd[2152]: LMPD_PARSE_ERROR: [edit protocols link-management]   Configuration database open failure: Could not open configuration database  Jul  6 23:26:04   init: link-management is thrashing, not restartedAmnesiac (ttyd0)login: Jul  6 23:26:05   init: sonet-aps is thrashing, not restartedAmnesiac (ttyd0)login: Jul  6 23:26:06   cosd[2158]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:26:06   cosd[2158]: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Jul  6 23:26:06   init: class-of-service is thrashing, not restartedJul  6 23:26:06   /usr/sbin/sampled[2159]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:26:06   /usr/sbin/sampled[2159]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration databasAmnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Jul  6 23:26:07   rpd[2160]: UI_Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: root--- JUNOS 6.0R1.3 built 2003-07-24 02:20:37 UTCTerminal type? [vt100] HHHHHHHHHroot@% root@% root@% root@% root@% root@% root@% root@% ccliroot> configure Entering configuration modeThe configuration has been changed but not committed[edit]root# edit se             ^'se' is ambiguous.Possible completions:> security             > services             Service PIC applications settings[edit]root# edit se   er           ^syntax error, expecting  or .root# edit seer         rvices fi                    ^syntax error, expecting [Enter], '|', , or .root# edit services fi    ir      i   r                    ^syntax error, expecting [Enter], '|', , or .root# edit services fir                               ^syntax error, expecting [Enter], '|', , or .root# edit services f       ?Possible completions:              Execute this command> adaptive-services-pics  Adaptive Services PIC daemon configuration> ids                  Configure the intrusion detection system> nat                  Configure Network Address Translation> service-set          Define a service set> stateful-firewall    Configure stateful firewall services  |                    Pipe through a command[edit]root# edit services    nat ?Possible completions:              Execute this command> pool                 Define a NAT pool> rule                 Define a NAT rule> rule-set             Defines a set of NAT rules  |                    Pipe through a command[edit]root# edit services nat                                                          exit The configuration has been changed but not committedExit with uncommitted changes? [yes,no] (yes) no Exit aborted[edit]root# ls      ^unknown command.[edit]root# exit The configuration has been changed but not committedExit with uncommitted changes? [yes,no] (yes) no Exit aborted[edit]root# exit The configuration has been changed but not committedExit with uncommitted changes? [yes,no] (yes) yes Exiting configuration moderoot> exit root@% ls.cshrc                .login                .profileroot@% cd /etc/varvar/etcroot@% lsdcd.irsd.conf                irsd_rtins.conf                rc.ui.defaultsdcd.vrrp.conf                master.passwd                rc.ui.defaults.rawfilters                        motd                        spwd.dbgroup                        passwd                        ttysinetd.conf                pwd.dbroot@% cd /var/teroot@% lsbin                db                log                tmpcrash                etc                run                transfercron                home                swroot@% cd tmproot@% lschargingd_log_data.tmp                jbundle-6.0R1.3-export.tgzroot@% cd /root@% lsCOPYRIGHT        boot                kernel                root                varaltconfig        config                mnt                sbinaltroot                dev                packages        tmpbin                etc                proc                usrroot@% cd tmproot@% ls.clnpkg.LCK        .pkg.LCKroot@% cd ..root@% lsCOPYRIGHT        boot                kernel                root                varaltconfig        config                mnt                sbinaltroot                dev                packages        tmpbin                etc                proc                usrroot@% ccd bootroot@% lsboot0                cdboot                loader                loader.help        pxebootboot1                defaults        loader.4th        loader.rc        support.4thboot2                kgzldr.o        loader.conf        mbrroot@% cd /root@% lsCOPYRIGHT        boot                kernel                root                varaltconfig        config                mnt                sbinaltroot                dev                packages        tmpbin                etc                proc                usrroot@% cd /var/tmproot@% lschargingd_log_data.tmp                jbundle-6.0R1.3-export.tgzroot@% ftp 10.37.144.117ftp: connect: Can't assign requested addressftp> exitroot@% ping 10.37.144.117PING 10.37.144.117 (10.37.144.117): 56 data bytesping: sendto: No route to hostping: sendto: No route to hostping: sendto: No route to hostping: sendto: No route to host^C--- 10.37.144.117 ping statistics ---4 packets transmitted, 0 packets received, 100% packet lossroot@% ifconfigfxp0:        encaps: ether; framing: etherflags=0x1/0x2         curr media: i802 0:8:c7:81:44:d7fxp1:        encaps: ether; framing: etherflags=0x1/0x2         curr media: i802 0:a0:c9:75:bc:6elsi:        encaps: (null); framing: pseudoflags=0x3/0x0 dsc:        encaps: (null); framing: pseudoflags=0x3/0x2 lo0:        encaps: loopback; framing: localflags=0x103/0x2 tap:        encaps: other; framing: pseudoflags=0x1/0x2 gre:        encaps: (null); framing: flags=0x3/0x10 ipip:        encaps: (null); framing: flags=0x3/0x0 pime:        encaps: (null); framing: flags=0x3/0x0 pimd:        encaps: (null); framing: flags=0x3/0x0 mtun:        encaps: (null); framing: flags=0x3/0x200 root@% cliroot> re        ^'re' is ambiguous.Possible completions:  request              Make system-level requests  restart              Restart a software processroot> re         set sys          ^syntax error, expecting .root> set sys          i                  configure Entering configuration modeThe configuration has been changed but not committed[edit]root# set ?Possible completions:> access               Network access configuration> accounting-options   Accounting data configuration> applications         + apply-groups         Groups from which to inherit configuration data> chassis              Chassis configuration> class-of-service     Class-of-service configuration> firewall             Define a firewall configuration> forwarding-options   Configure options to control packet sampling> groups               Configuration groups> interfaces           Interface configuration> logical-routers      Logical routers> policy-options       Routing policy option configuration> protocols            Routing protocol configuration> routing-instances    Routing instance configuration> routing-options      Protocol-independent routing option configuration> security             > services             Service PIC applications settings> snmp                 Simple Network Management Protocol (SNMP) configuration> system               System parameters[edit]root# set    interfaces ?Possible completions:       Interface name+ apply-groups         Groups from which to inherit configuration data> traceoptions         Interface trace options[edit]root# set interfaces    fx0   p0 ?Possible completions:  accounting-profile   Accounting profile name+ apply-groups         Groups from which to inherit configuration data  description          Text description of interface  disable              Disable this interface  gratuitous-arp-reply  Enable gratuitous ARP reply> hold-time            Hold time for link up and link down  link-mode            Link operational mode  mac                  Hardware MAC address  no-gratuitous-arp-reply  Don't enable gratuitous ARP reply  no-gratuitous-arp-request  Ignore gratuitous ARP request  no-traps             Don't enable SNMP notifications on state changes  speed                Link speed> traceoptions         Interface trace options  traps                Enable SNMP notifications on state changes> unit                 Logical interface  vlan-tagging         802.1Q VLAN tagging support[edit]root# set interfaces fxp0    ui                          ^syntax error.root# set interfaces fxp0 ui      nit 0 ?Possible completions:              Execute this command  accounting-profile   Accounting profile name+ apply-groups         Groups from which to inherit configuration data  bandwidth            Logical unit bandwidth (informational only)  description          Text description of the interface  disable              Disable this logical interface  encapsulation        Logical link-layer encapsulation> family               Protocol family  no-traps             Don't enable SNMP notifications on state changes  passive-monitor-mode  Use interface to tap packets from another router  traps                Enable SNMP notifications on state changes  vlan-id              Virtual LAN identifier value for 802.1Q VLAN tags  |                    Pipe through a command[edit]root# set interfaces fxp0 unit 0    family ?Possible completions:> ccc                  Circuit cross-connect parameters> inet                 IPv4 parameters> inet6                IPv6 protocol parameters> iso                  OSI ISO protocol parameters> mpls                 MPLS protocol parameters> tcc                  Translational cross-connect parameters> vpls                 Virtual Private LAN Service (VPLS) parameters[edit]root# set interfaces fxp0 unit 0 family    inet ?Possible completions:              Execute this command> address              Interface address/destination prefix+ apply-groups         Groups from which to inherit configuration data> filter               Packet filtering  no-redirects         Do not redirect traffic> policer              Interface policing  primary              Candidate for primary interface in system  |                    Pipe through a command[edit]root# set interfaces fxp0 unit 0 family inet    address ?Possible completions:               Interface address/destination prefix[edit]root# set interfaces fxp0 unit 0 family inet address    10.37.144.18/21 [edit]root# commit Jul  6 23:28:49   dcd[2196]: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryJul  6 23:28:49   dcd[2196]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:28:49   dcd[2196]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Jul  6 23:28:50   rpd[2202]: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Configuration database open failure: Could not open configuration database Jul  6 23:28:50   cosd[2210]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:28:50   /usr/sbin/sampled[2208]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:28:50   cosd[2210]: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Jul  6 23:28:50   lmpd[2214]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:28:50   /usr/sbin/sampled[2208]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Jul  6 23:28:50   lmpd[2214]: LMPD_PARSE_ERROR: [edit protocols link-management]   Configuration database open failure: Could not open configuration database  Jul  6 23:28:50   /usr/sbin/sampled[2208]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:28:51   /usr/sbin/sampled[2208]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database Jul  6 23:28:51   /usr/sbin/sampled[2208]: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul  6 23:28:51   /usr/sbin/sampled[2208]: [edit forwarding-options sampling]   Opening configuration database     Could not open configuration database commit complete[edit]root# [edit]root# [edit]root# [edit]root# [edit]root# exit Exiting configuration modeJul  6 23:28:57   dcd[2229]: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryJul  6 23:28:57   dcd[2229]: COSD_CONF_OPEN_FAILURE: Unable to open: /var/etc/cosd.conf, using default CoS forwarding classes, do 'commit full' in cli to avoid this messageJul  6 23:28:57   cosd[2224]: COSD_CONF_OPEN_FAILURE: Unable to open: /var/etc/cosd.conf, using default CoS forwarding classes, do 'commit full' in cli to avoid this messagefxp1: Multicast addr command failedroot> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> e   exit root@% pwd/var/tmproot@% fJul  6 23:29:14   init: ntp is thrashing, not restartedtpftp> ftp> ftp 10.37.144.1817Connected to 10.37.144.117.220 COMMONOR-752BE1 Microsoft FTP Service (Version 5.0).Name (10.37.144.117:root): xulin331 Password required for xulin.Password:530 User xulin cannot log in.ftp: Login failed.ftp> ftp> ftp> ls200 PORT command successful.530 Please login with USER and PASS.ftp> exit221  root@% ftppwdcliifconfigping 10.37.144.117PING 10.37.144.117 (10.37.144.117): 56 data bytes64 bytes from 10.37.144.117: icmp_seq=0 ttl=128 time=0.457 ms64 bytes from 10.37.144.117: icmp_seq=1 ttl=128 time=0.384 ms^C--- 10.37.144.117 ping statistics ---2 packets transmitted, 2 packets received, 0% packet lossround-trip min/avg/max/stddev = 0.384/0.420/0.457/0.037 msroot@% ftp 10.37.144.117Connected to 10.37.144.117.220 COMMONOR-752BE1 Microsoft FTP Service (Version 5.0).Name (10.37.144.117:root): xulin331 Password required for xulin.Password:230 User xulin logged in.Remote system type is Windows_NT.ftp> ftp> ftp> ftp> dir200 PORT command successful.150 Opening ASCII mode data connection for /bin/ls.03-19-04  10:33PM                   37 +COMMENT03-19-04  10:33PM                  524 +CONTENTS03-19-04  10:33PM                58500 +DEINSTALL03-19-04  10:33PM                  241 +DESC03-19-04  10:33PM                59280 +INSTALL03-19-04  10:33PM                58700 +REQUIRE07-06-04  09:21PM                 bin03-19-04  10:32PM              4372480 bootstrap-install-6.2R2.4.tar03-19-04  10:32PM             45194934 jbundle-6.2R2.4-export.tgz07-06-04  05:04PM             41604471 jinstall-6.0R1.3-export.tgz03-19-04  10:33PM             47848640 jinstall-6.2R2.4-export.tgz03-19-04  10:34PM                   33 jinstall-6.2R2.4-export.tgz.md507-01-04  02:52PM             47859035 jinstall-6.2R2.4-export-signed.tgz226 Transfer complete.ftp> bin200 Type set to I.ftp> get jinstall-6.2R2.4-export-signed.tgzlocal: jinstall-6.2R2.4-export-signed.tgz remote: jinstall-6.2R2.4-export-signed.tgz200 PORT command successful.150 Opening BINARY mode data connection for jinstall-6.2R2.4-export-signed.tgz(47859035 bytes).  0% |                                                  |     0       --:-- ETA  8% |****                                              |  3772 KB    00:11 ETA 16% |********                                          |  7492 KB    00:10 ETA 24% |************                                      | 11345 KB    00:09 ETA 32% |****************                                  | 14984 KB    00:08 ETA 38% |*******************                               | 18048 KB    00:07 ETA 44% |**********************                            | 20964 KB    00:07 ETA 52% |**************************                        | 24414 KB    00:06 ETA 60% |******************************                    | 28389 KB    00:05 ETA 67% |*********************************                 | 31653 KB    00:04 ETA 74% |*************************************             | 34702 KB    00:03 ETA 83% |*****************************************         | 38868 KB    00:02 ETA 90% |*********************************************     | 42380 KB    00:01 ETA 98% |************************************************* | 45829 KB    00:00 ETA100% |**************************************************| 46737 KB    00:00 ETA226 Transfer complete.47859035 bytes received in 13.36 seconds (3.42 MB/s)ftp> qrrerecv                rename                restartreget                reset                restrictftp> requexit221  root@% cliroot> request ssy      ystem software add jinstall-6.2R2.4-export-signed.tgz NOTICE: Validating configuration against jinstall-6.2R2.4-export-signed.tgz.NOTICE: Use the 'no-validate' option to skip this if desired.Checking compatibility with configurationInitializing...Using jbase-6.0R1.3Using /var/tmp/jinstall-6.2R2.4-export-signed.tgzVerified MD5 checksum of /var/validate/tmp/jinstall/jinstall-6.2R2.4-export.tgzUsing /var/validate/tmp/jinstall-signed/jinstall-6.2R2.4-export.tgzUsing /var/validate/tmp/jinstall/jbundle-6.2R2.4-export.tgzUsing /var/validate/tmp/jbundle/jbase-6.2R2.4.tgzUsing /var/validate/tmp/jbundle/jkernel-6.2R2.4.tgzUsing /var/validate/tmp/jbundle/jpfe-6.2R2.4.tgzUsing /var/validate/tmp/jbundle/jdocs-6.2R2.4.tgzUsing /var/validate/tmp/jbundle/jroute-6.2R2.4.tgzValidating against /config/juniper.confJul  6 23:33:21   init: ntp is thrashing, not restartedmgd: commit completeValidation succeededInstalling package '/var/tmp/jinstall-6.2R2.4-export-signed.tgz' ...Verified MD5 checksum of jinstall-6.2R2.4-export.tgzAdding jinstall...WARNING:     This package will load JUNOS 6.2R2.4 software.WARNING:     It will save JUNOS configuration files, and SSH keysWARNING:     (if configured), but erase all other files and informationWARNING:     stored on this machine.  It will attempt to preserve dumpsWARNING:     and log files, but this can not be guaranteed.  This is theWARNING:     pre-installation stage and all the software is loaded whenWARNING:     you reboot the system.Saving the config files ...Installing the bootstrap installer ...WARNING:     A REBOOT IS REQUIRED TO LOAD THIS SOFTWARE CORRECTLY. Use theWARNING:     'request system reboot' command when software installation isWARNING:     complete. To abort the installation, do not reboot your system,WARNING:     instead use the 'request system software delete jinstall'WARNING:     command as soon as this operation completes.Saving package file in /var/sw/pkg/jinstall-6.2R2.4-export-signed.tgz ...Saving state for rollback ...root> request system reboot Reboot the system ? [yes,no] (no) yes Reboot consistency check bypassed - jinstall 6.2R2.4 will complete installation upon rebootshutdown: [pid 11000]Shutdown NOW!                                                                               *** FINAL System shutdown message from root@ ***                             System going down IMMEDIATELY                                                                                                                                                                                                                root> Jul  6 23:35:06   rpd[2227]: RPD_SNMP_SARECV: snmp_epi_recv: error from sam_recv: 0Waiting (max 60 seconds) for system process `bufdaemon' to stop...stoppedWaiting (max 60 seconds) for system process `syncer' to stop...stoppedsyncing disks... 22 21 20 14 7 1 doneUptime: 10m11sata0: resetting devices .. doneata0: Spinning down devices. Please wait...ata2: Spinning down devices. Please wait...Rebooting...Console: serial portBIOS drive C: is disk0BIOS 639kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(builder@iaculi.juniper.net, Fri Mar 19 13:30:21 GMT 2004)|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/boot/installer text=0x2128c5 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x20ea8+0x29f98 \|/-\|/-\|/-\|/-\syms=[0x4+0x2c4b0|/-\|/-\|/-\|/-\|/-\|/-+0x4+0x33e85\|/-\|/-\|/-\|/-\|/-\|/-\]|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|Hit [Enter] to boot immediately, or space bar for command prompt.Booting [installer]...               Copyright ?1996-2001, Juniper Networks, Inc.All rights reserved.Copyright ?1992-2001 The FreeBSD Project.Copyright ?1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994        The Regents of the University of California. All rights reserved.JUNOS 6.2R2.4 #0: 2004-03-19 13:32:37 UTC    builder@iaculi.juniper.net:/build/iaculi-c/6.2R2.4/obj-i386/sys/compile/MFSTimecounter "i8254"  frequency 1193182 HzTimecounter "TSC"  frequency 349180872 HzCPU: Pentium II/Pentium II Xeon/Celeron (349.18-MHz 686-class CPU)  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2  Features=0x183f9ffreal memory  = 268435456 (262144K bytes)sio0: gdb debugging portavail memory = 253927424 (247976K bytes)Olive CPUPreloaded elf kernel "installer" at 0xc0718000.Preloaded md_image "/boot/mdimg" at 0xc07180a0.DEVFS: ready for devicesPentium Pro MTRR support enabledmd0: Preloaded image  3504128 bytes at 0xc03bea60md1: Malloc disknpx0:  on motherboardnpx0: INT 16 interfacepcib0:  on motherboardpci0:  on pcib0pcib1:  at device 1.0 on pci0pci1:  on pcib1pci1:  at 0.0 irq 11fxp0:  port 0x2000-0x201f mem 0x40100000-0x401fffff,0x40200000-0x40200fff irq 11 at device 10.0 on pci0fxp1:  port 0x2060-0x207f mem 0x42000000-0x420fffff,0x42100000-0x42100fff irq 11 at device 14.0 on pci0isab0:  at device 20.0 on pci0isa0:  on isab0atapci0:  port 0x2040-0x204f at device 20.1 on pci0ata0: at 0x1f0 irq 14 on atapci0pci0:  at 20.2 irq 11smb0:  port 0xfc00-0xfc0f at device 20.3 on pci0fdc0:  at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0ata2 at port 0x170-0x177,0x376 irq 15 on isa0atkbdc0:  at port 0x60,0x64 on isa0atkbd0:  flags 0x1 irq 1 on atkbdc0psm0:  irq 12 on atkbdc0psm0: model IntelliMouse, device ID 3vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0sc0:  at flags 0x100 on isa0sc0: VGA sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0sio0: type 16550A, consolesio1 at port 0x2f8-0x2ff irq 3 on isa0sio1: type 16550Afxp0: Ethernet address 00:08:c7:81:44:d7fxp1: Ethernet address 00:a0:c9:75:bc:6eDEVFS: ready to runad0: 1547MB  [3145/16/63] at ata0-master using PIO3ata2-slave:  CDROM device - NO DRIVER!Mounting root from cd9660:/dev/md0cDisabling watchdog=================== Bootstrap installer starting ===================Initialized the environmentRouting engine model is OliveSourcing /sbin/OliveDiscovered that flash disk =  , hard disk = ad0Disk to install is wd0 Setting ospackage=jboot-6.2R2.4, configpackage=configs-6.2R2.4.tgzSetting packlist=jbundle-6.2R2.4-export.tgzSetting isupgrade=jboot-6.2R2.4Packages and configurations copied to /tmpCleaning up wd0...Running newfs on wd0s1a...Warning: 3612 sector(s) in last cylinder unallocated/dev/wd0s1a:        225764 sectors in 56 cylinders of 1 tracks, 4096 sectors        110.2MB in 4 cyl groups (16 c/g, 32.00MB/g, 6912 i/g)super-block backups (for fsck -b #) at: 32, 65568, 131104, 196640Running newfs on wd0s1e...Warning: 3588 sector(s) in last cylinder unallocated/dev/wd0s1e:        25084 sectors in 7 cylinders of 1 tracks, 4096 sectors        12.2MB in 1 cyl groups (16 c/g, 32.00MB/g, 3136 i/g)super-block backups (for fsck -b #) at: 32Installing disk label on wd0Installing JUNOS on wd0...Making root filesystem...Adding jbase...Mounted jbase on /mnt/packages/mnt/jbase (/dev/vn0)Adding jbundle-6.2R2.4-export.tgz...Requested space: 180779736 bytes, free space: 694097920 bytes in /var/tmp/instmp.KDlUgrRunning requirements file first for jbundle-6.2R2.4-export..Running pre-install for jbundle-6.2R2.4-export..extract: Package name is jbundle-6.2R2.4-exportextract: CWD to .Running post-install for jbundle-6.2R2.4-export..Verified MD5 checksum of jbase-6.2R2.4.tgzVerified MD5 checksum of jboot-6.2R2.4Verified MD5 checksum of jdocs-6.2R2.4.tgzVerified MD5 checksum of jkernel-6.2R2.4.tgzVerified MD5 checksum of jpfe-6.2R2.4.tgzVerified MD5 checksum of jroute-6.2R2.4.tgzAdding jkernel...Adding jpfe...Adding jdocs...Adding jroute...Restoring backed up configurations...Unmounted /mnt/packages/mnt/jbase24: TerminatedWaiting (max 60 seconds) for system process `bufdaemon' to stop...stoppedWaiting (max 60 seconds) for system process `syncer' to stop...stoppedsyncing disks... doneUptime: 2m37sata0: Spinning down devices. Please wait...ata2: Spinning down devices. Please wait...Rebooting...Console: serial portBIOS drive C: is disk0BIOS 639kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(builder@iaculi.juniper.net, Fri Mar 19 13:30:21 GMT 2004)|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/kernel text=0x496b56 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-&#

ghg123456

JUNOS 是好东西啊