|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有账号?注册
×
1.3b1 (12/16/2006)
changed base system to FreeBSD 6.2-RC1 (final 1.3 version will be based on FreeBSD 6.2-RELEASE)
WARNING: the generic-pc image no longer fits on 8 MB CF cards! (>= 10 MB required)
added support for new wireless features in FreeBSD 6
Atheros cards are finally supported!
channel selection on interface setup page now reflects actual capabilities of card
wireless status page shows scanned APs in client mode and associated stations in hostap mode
WPA support is expected in the next release
for generic-pc-cdrom, the configuration may now also be stored on an USB memory stick (instead of a floppy disk). m0n0wall will automatically probe for an USB stick with an FAT file system first, and if this fails, fall back to the floppy drive.
Note that this release can also be booted directly from a USB memory stick on most PCs (simply install the generic-pc image to your USB memory stick with physdiskwrite), so generic-pc-cdrom is now only for machines that either don't have USB at all or that can't boot from USB due to BIOS limitations.
removed MTU option from Interfaces: WAN page. This used to control TCP MSS adjustment, but since the non-NAT-dependent MSS fixup patch kludged into ipnat has not been ported to ipfilter 4 (and is an ugly hack at best anyway), MSS fixup is now automatically applied for PPPoE connections (where it is actually needed) using MPD's integrated feature and shouldn't be necessary in other cases
a rather intrusive kernel patch was required to make concurrent traffic shaping + NAT on the WAN interface possible; if you rely on this feature, please test it well and report any problems
该版本从PF早期版本上移植而来,所以仍然基于旧的FB6.2-RC1版本开发.提醒一下大家,最重要的是准备一块大于10M的CF卡,否则无法安装! |
|