学习ros无线路由

yuanyonghuio

Point to Point
50 km link, as low as $598!
Multipoint
Connect Up to 100 clients!
Backbone + AP
High speeds at distant sites!
Nstreme
DOUBLE the Speed!
WDS

High-speed wireless systems are used to provide internet access to end-users using point-to-point or point-to-multipoint architecture. Wireless data links take place where there is no infrastructure for internet access or in places where bandwidth offered by current channels is too low. With our wireless equipment you can get high bandwidth on a very long distances at very reasonable price. Our equipment provides various features including firewall, NAT, VPN, Bandwidth Management, QoS and many more.

Why choose Mikrotik?

Cost effective solution
High-speed wireless data links (Up to 108Mbps)
Connection distance up to 70 km without repeater sites.
IP - NAT, Routing, DHCP
Security - Firewall, Secure Tunnels
Control - Queues, Proxy, Accounting, HotSpot
Fast and simple installation for base station and clients
Reliable and instant 24 hour internet access

Basic requirements to create a wireless links are:

Direct Line of sight between both points of presence
Distance between points of presence is:


up to 25 km for point-to-multipoint links
up to 70 km for point-to-point links

Use of 2.4 or 5.2-5.8 GHz solutions according to the local regulations. In some countries obtaining a special license might be required.

Our wireless systems come with Mikrotik routeros software preinstalled. RouterOS will enable you to use many features such as: firewall, NAT, bandwidth management, different kinds of tunnels, HotSpot and others.

                               
登录/注册后可看大图

Point-to-point links


PtP links are an excellent way how to make connections between two sites and achieve high data transfer speeds. This is an ideal way how to connect two offices. Also these type of wireless links are very useful if you need to create backbone link from some distant radio access point to your main Internet source. For creating such connections we recommend to use our 5 GHz and 2.4 GHz wireless client kits.

A customer from Bulgaria reports:

"This 35Mbit at 57km is with non-turbo mode, unidirectional, with random-data=no. Machines on both ends are 700MHz C3. During the test, both routers (that have few more Atheros interfaces each), were not transporting traffic."



To make this setup, you can use:

2.4 GHz:      
ERROR: no product with code RB/2019

5 GHz:      
(RIC/522) 5.1-5.8Ghz Integrated Router Antenna $299  
(RB/RPO) MikroTik 5GHz OUTDOOR Client Package $425  


Click here for setup instructions

                               
登录/注册后可看大图