6.0 RC6最新软路

zhengfwang

有什么新的6.0rc6（2012-dec-21 20）：
*）固定的问题- netinstall为86不工作；
*）-添加take-screenshot命令；
*）液晶显示器固定校准，新议会不再需要校准；
*）优化内存使用- 32兆routerboards更稳定；
*）支持bandrich调制解调器与新的固件；
*）安全认证使用证书存储证书检查但没有现在；
*）补充功能-闪光可以被分割在routerboards和
不同的版本，可以安装在每个人（需要新固件）；
*）固定的问题-恢复备份后，它又恢复了在每次重新启动；
*）改进的路由器性能时，客户端/服务器目前在系统；
*）固定技术在债券后，重新启动；
*）修正队列内核崩溃；
有什么新的6.0rc5（2012-dec-05 22）：
*）无线-先进的选择是唯一的方法；
*）客户端支持keyboard-interactive认证；
*）修正简单队列配置升级；
有什么新的6.0rc4（2012-nov-28 17 : 16）：
*）服务器-添加2半径字符串选项（24，25）用于自定义的选项；
*）固定的问题-购买力平价按需拨号不工作，它老是拨号；
*）固定的问题-密码没有保存，当添加新用户；
*）补充功能-显示last-logged-in用户列表；
*）协议-固定接口表；
*）的IP v6 -添加评论领域；
*）客户端的IP v6 -添加/删除默认路由或服务器没有更新，当设置改变；
*）购买力平价客户设立域名dynamic-servers不是静态的；
*）固定的问题-连接按钮不工作在无线扫描器；
*）服务器-添加支持框架路线半径；
*）固定的问题- metarouters没有工作在机板（rb800，rb1000，rb1100）；
*）固定的问题-更新检测停止工作，如果没有发现新的更新
以前的；
*）的IP v6 -添加域名选择支持；
*）是支持所有协议封装，不只是知识产权和IP v6；
有什么新的6.0rc3（2012-nov-09 59）：
*）固定的问题- metarouters不工作rb2011s；
*）固定的问题-瑞昱1gbit以太网卡不工作；
*）说“网络设置”菜单以下设置：
ip-forward，send-redirects，accept-source-route，accept-redirects，
secure-redirects，rp-filter，tcp-syncookies；
*）修正一些IP v6防火墙匹配器；
*）的绩效改进eoip，eoipv6，希腊，gre6隧道，特别是在多核心；
*）/队列树条目母=全球分别执行从简单和前/简单队列队列；
*）-固定失踪OID简单网络管理协议；
有什么新的6.0rc2（2012-oct-24 27）：
*）添加快速路径支持某些接口上
（所有以太网上rb3xx，rb6xx，rb7xx，rb8xx，rb9xx，rb1000，rb11xx，rb2011）；
*）添加IP v4快速路径，双打IP v4转发性能
支持的接口时，没有防火墙，conntrack，队列。
*）增加的交通发生器快速路径；
*）addedbridge快速路径；
更多信息的快速路径：：/ /维基。mikrotik。http : / /手册：fast_path维基
有什么新的6.0rc1（2012-sep-26 14:56）：
*）i 386 -越来越多的支持核心64；
*）userman固定无偿配置激活而认证；
*）客户端定制选项；
*）配置选项-混合不同的数据类型；
*）控制台-“出口紧凑”现在是默认的，用“口罗嗦”得到
以前的行为；
*）协议-使它工作；
*）tftpd -如果real-file是现有目录前缀请求它；
*）rb333以太网回来；
*）域名服务器-旋转只有失败；
*）修正m3p（或包装）；
有什么新的6.0beta3（2012-aug-22 12 : 12）：
*）安装-使用较少的存储空间（工程与32mib闪光）；
*）routerboard包现已并入系统包；
*）userman -使用相应的时区数据时，显示在控制台；
*）- - init-string选项；
*）中杀之如果ipsec-sa回覆到期，由于系统时间的变化；
*）安全-重新期届满前；
*）中-当最后isakmp-sa删除远程主机删除相关ipsec-sas；
*）中发送删除ipsec-sas关机/重新启动；
*）用户经理-解决用户的活动结束时间如果有无限的有效性，
这些用户现在不会被隐藏的报告日期过滤器有影响；
*）证书的有效性证明使用本地时区偏移；
*）固定比特率报告队列；
*）固定IP v6防火墙；
*）升级驱动和内核（以linux-3.3.5）；
*）添加优先匹配防火墙；
*）添加change-dscp from-priority和from-priority-to-high-3-bits选项；
*）固定路由器崩溃或挂在重新启动；
*）添加snif-tzsp，snif-pc行动网络IP v6防火墙脚本；
*）traffic-generator改进为多核心；
有什么新的6.0beta2（2012-apr-24 10:57）：
*）“/地址集”和“/ IP v6地址设置”命令不正常工作；（2012-apr-16 26）：
*）修正eoipv6隧道，隧道

57068368

94还不如直接帖英文呢。

sealin

What's new in 6.0rc6 (2012-Dec-21 12:20):

*) fixed problem - netinstall for x86 did not work;
*) lcd - added take-screenshot command;
*) lcd - fixed calibration, fresh boards no longer require recalibration;
*) optimize memory usage - makes 32Mb routerboards more stable;
*) support BandRich modems with newer firmware;
*) ipsec - authentication using certificate store but without CRL checking for now;
*) added feature - flash can be partitioned on routerboards and
   separate versions can be installed on each of them (requires latest firmware);
*) fixed problem - after restoring backup, it gets restored again on every reboot;
*) improved router performance when dhcp client/server present in system;
*) fixed vlan on bond after reboot;
*) fixed occasional queue kernel crash;

What's new in 6.0rc5 (2012-Dec-05 15:22):

*) wireless - advanced rate selection is the only method supported;
*) ssh client - support keyboard-interactive authentication;
*) fix simple queue config upgrade;

What's new in 6.0rc4 (2012-Nov-28 17:16):

*) dhcp server - added two radius string options (24, 25) for use in custom dhcp options;
*) fixed problem - ppp dial-on-demand did not work, it allways dialed in;
*) fixed problem - password was not saved when adding new user;
*) added feature - show last-logged-in in users list;
*) snmp - fix interface table;
*) dhcp ipv6 - added comment fields;
*) dhcp client ipv6 - add/remove default route or ntp server without renew when settings change;
*) ppp clients - set up dns dynamic-servers instead of static ones;
*) fixed problem - Connect button did not work in wireless scanner;
*) dhcp server - added radius framed route support;
*) fixed problem - MetaROUTERs did not work on PowerPC boards (RB800, RB1000, RB1100);
*) fixed problem - check-for-updates stopped working if it didn't find new updates
   previously;
*) dhcp ipv6 - added dns option support;
*) gre - support all protocol encapsulation, not just ip and ipv6;

What's new in 6.0rc3 (2012-Nov-09 12:59):

*) fixed problem - MetaROUTERs did not work on RB2011s;
*) fixed problem - Realtek 1Gbit ethernet cards did not work;
*) added "/ip settings" menu with following settings:
   ip-forward, send-redirects, accept-source-route, accept-redirects,
   secure-redirects, rp-filter, tcp-syncookies;
*) fix some ipv6 firewall matchers;
*) improved performance for eoip,eoipv6,gre,gre6 tunnels, especially on multi core;
*) /queue tree entries with parent=global are performed separately from /queue simple and before /queue simple;
*) snmp - fixed missing OIDs;

What's new in 6.0rc2 (2012-Oct-24 11:27):

*) added generic fast path support on certain interfaces
   (all ethernets on RB3xx, RB6xx, RB7xx, RB8xx, RB9xx, RB1000, RB11xx, RB2011);
*) added ipv4 fast path, it doubles ipv4 forwarding performance
   on supported interfaces when no firewall, conntrack, queues.
*) added traffic generator fast path;
*) addedbridge fast path;
   More info on fast path: http://wiki.mikrotik.com/wiki/Manual:Fast_Path

What's new in 6.0rc1 (2012-Sep-26 14:56):

*) i386 - increased number of supported cores to 64;
*) userman - fix unpaid profile activation while authenticating;
*) dhcp client - custom options;
*) dhcp options - allow mixing different data types;
*) console - "export compact" now is the default, use "export verbose" to get
     previous behaviour;
*) ntp - make it work again;
*) tftpd - if real-file is a existing directory then prefix request with it;
*) RB333 ethernets are back;
*) dns - rotate servers only on failure;
*) fix M3P (/ip packing);

What's new in 6.0beta3 (2012-Aug-22 12:12):

*) installation - use much less space in storage (works well with 32MiB flash);
*) routerboard package is now merged with system package;
*) userman - use corresponding time zone data when showing date in console;
*) gps - init-string option;
*) ipsec - kill phase1 if ipsec-sa in responder expires due to system time change;
*) ipsec - rekey phase1 before expiration;
*) ipsec - when last ISAKMP-SA is deleted for the remote host remove related IPSec-SAs;
*) ipsec - send delete IPSec-SAs on shutdown/reboot;
*) user manager - fix user's active profile end time if it has unlimited validity,
    these users now won't be hidden from reports when date filters are in effect;
*) certificate validity is shown using local timezone offset;
*) fixed queue bit rate reporting;
*) fixed ipv6 firewall;
*) upgraded drivers and kernel (to linux-3.3.5);
*) added priority matcher to firewall;
*) added change-dscp from-priority and from-priority-to-high-3-bits options;
*) fixed router crash or hang when rebooting;
*) add snif-tzsp,snif-pc actions to ip/ipv6 firewall mangle;
*) traffic-generator improvements for multi core;

What's new in 6.0beta2 (2012-Apr-24 10:57):

*) "/ip address set" and "/ipv6 address set" commands did not work properly; (2012-apr-16 14:26):
*) fix eoipv6 tunnels, tunnel-ids in packets were shuffled;
*) fix dynamic simple queues;
*) fix /ipv6 firewall connection-state matcher, was crashing router;
*) fix traffic generator, was crashing router when generating traffic on bonding interface;
*) fix wds interfaces;
*) downgrading to v5 was losing wireless interface configuration;
*) fix queue byte and rate statistics;
*) fix ethernet port order on all boards;

What's new in 6.0beta1 (2012-Apr-13 15:26):

*) updated drivers and kernel (to linux-2.6.38.2);
*) improved interface management (scales well for up to thousands of interfaces and more);
*) improved queue management (/queue simple and /queue tree) - easily handles tens
   of thousands of queues;
*) improved overall router performance when simple queues are used -
   at least double the performance of v5, even bigger improvements on multicore systems;
*) very small overhead for packets that miss simple queues,
   but simple queues are present in the system;
*) pcq queue is NAT aware (just like "/queue simple" and "/ip traffic-flow";
*) in "/ip firewall mangle" can specify "new-priority=from-dscp-high-3-bits";
*) new default queue types: pcq-download-default and pcq-upload-default;
*) simple queues have separate priority setting for download/upload/total;
*) slave flag shows up for interfaces that are in bridge,bonding or switch group;
*) global-in, global-out, global-total parent in /queue tree is
   replaced with global that is equivalent to global-total in v5;
*) simple queues happen in different place - at the very end of
   postrouting and local-in chains;
*) simple queues target-addresses and interface parameters are joined into one
   target parameter, now supports multiple interfaces match for one queue;
*) simple queues dst-address parameter is changed to dst and now supports
   destination interface matching;
*) dns cache logs requests to topics "dns" and "packet";