在多vlan下，ros设置pppoe服务器遇到的问题，望指教啊。

rusnq

原帖由 tpy372 于 2007-5-12 18:49 发表

                               
登录/注册后可看大图

这里一个...
未出现25楼的情况

:lol :lol

超过500淫无VLAN 又一个！已经成为历史

hackjun

呵呵。。其实我500台也不是不想建vlan,我那边所有的交换机根本不支持vlan..
现在回想下可能明白为什么有时交换机或服务器挂掉的原因了。

不过出现的机率比较少，一学期交换机挂了一次，服务器挂了三次。
没查到原因。

heartsdal

交换机怎么设置的？

wugalang88

顶一下

renzu

tpy372 发表于 2007-5-11 02:18

                               
登录/注册后可看大图

广播会要命???
楼上有实践么。。。道听途说

500台而不分Vlan，很糟糕的

renzu

电信的ME60 都不能承受同一Vlan下几百用户，呵呵

tangdong

我现在有的地方都是这样做的，每个vlan一个pppoe server，模板都是使用的一样的！贴下配置
/interface vlan
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan1 \
    use-service-tag=no vlan-id=1
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan2 \
    use-service-tag=no vlan-id=2
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan3 \
    use-service-tag=no vlan-id=3
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan4 \
    use-service-tag=no vlan-id=4
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan5 \
    use-service-tag=no vlan-id=5
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan6 \
    use-service-tag=no vlan-id=6
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan7 \
    use-service-tag=no vlan-id=7
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan8 \
    use-service-tag=no vlan-id=8
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan9 \
    use-service-tag=no vlan-id=9
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan10 \
    use-service-tag=no vlan-id=10
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan11 \
    use-service-tag=no vlan-id=11
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan12 \
    use-service-tag=no vlan-id=12
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan13 \
    use-service-tag=no vlan-id=13
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan14 \
    use-service-tag=no vlan-id=14
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan15 \
    use-service-tag=no vlan-id=15
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan16 \
    use-service-tag=no vlan-id=16
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan17 \
    use-service-tag=no vlan-id=17
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan18 \
    use-service-tag=no vlan-id=18
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan19 \
    use-service-tag=no vlan-id=19
add arp=enabled comment="" disabled=no interface=lan mtu=1500

name=vlan20 \
    use-service-tag=no vlan-id=20

/ip pool
add name=pppoe ranges=10.92.0.1-10.92.100.188

/ppp profile
set default change-tcp-mss=default comment="" name=default only-

one=default \
    use-compression=default use-encryption=default use-vj-

compression=default
add change-tcp-mss=default comment="" dns-server=\
    202.96.128.166,202.96.134.133 local-address=pppoe name=pppoe

only-one=\
    default remote-address=pppoe use-compression=default use-

encryption=\
    default use-vj-compression=default
add change-tcp-mss=default comment="" dns-server=202.96.128.166 \
    local-address=pppoe name=manage only-one=default rate-limit=\
    "200000/2000000 250000/2500000 200000/2000000" remote-

address=pppoe \
    use-compression=default use-encryption=default use-vj-

compression=default
set default-encryption change-tcp-mss=yes comment="" name=default-

encryption \
    only-one=default use-compression=default use-encryption=yes \
    use-vj-compression=default

/interface pppoe-server server
add authentication=pap,chap default-profile=pppoe disabled=no

interface=lan \
    keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-sessions=0

mrru=\
    disabled one-session-per-host=yes service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=vlan1 \
    keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-sessions=0

mrru=\
    disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=vlan2 \
    keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-sessions=0

mrru=\
    disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=vlan3 \
    keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-sessions=0

mrru=\
    disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=vlan4 \
    keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-sessions=0

mrru=\
    disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=vlan5 \
    keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-sessions=0

mrru=\
    disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=vlan6 \
    keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-sessions=0

mrru=\
    disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=vlan7 \
    keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-sessions=0

mrru=\
    disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=vlan8 \
    keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-sessions=0

mrru=\
    disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=vlan9 \
    keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-sessions=0

mrru=\
    disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=\
    vlan10 keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-

sessions=0 \
    mrru=disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=\
    vlan11 keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-

sessions=0 \
    mrru=disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=\
    vlan12 keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-

sessions=0 \
    mrru=disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=\
    vlan13 keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-

sessions=0 \
    mrru=disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=\
    vlan14 keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-

sessions=0 \
    mrru=disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=\
    vlan15 keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-

sessions=0 \
    mrru=disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=\
    vlan16 keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-

sessions=0 \
    mrru=disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=\
    vlan17 keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-

sessions=0 \
    mrru=disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=\
    vlan18 keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-

sessions=0 \
    mrru=disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=\
    vlan19 keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-

sessions=0 \
    mrru=disabled one-session-per-host=no service-name=""
add authentication=pap,chap default-profile=pppoe disabled=no

interface=\
    vlan20 keepalive-timeout=10 max-mru=1480 max-mtu=1480 max-

sessions=0 \
    mrru=disabled one-session-per-host=no service-name=""
/interface pptp-server server
set authentication=pap,chap,mschap1,mschap2 default-profile=pppoe

enabled=yes \
    keepalive-timeout=30 max-mru=1460 max-mtu=1460 mrru=disabled

fuwujixian

学习学习    学习学习

wthhfl

hackjun 发表于 2007-5-11 15:46

                               
登录/注册后可看大图

呵呵。。多谢各位兄弟啊。。问题终于搞定了。

采用actcs的方法，每vlan一pppoe服务器。

如果ROS可以支持QINQ，那么只要在这些VLAN的外层再打上一层TAG标记，然后在这上面建一个PPPOE服务就行了

839551876

actcs 发表于 2007-5-10 17:32

                               
登录/注册后可看大图

每个VLAN都要起PPPOE服务,广播不能跨VLAN
提示下,ROS做PPPOE服务器必须流量不大于60M,在线不大于150人,否则 ...

为何这样说呢。

潇洒风云

学习了！  出来匝道算见识了！

willoume

actcs 发表于 2007-5-10 17:32

                               
登录/注册后可看大图

每个VLAN都要起PPPOE服务,广播不能跨VLAN
提示下,ROS做PPPOE服务器必须流量不大于60M,在线不大于150人,否则 ...

150人，那个版本，不是说L6级别带1000人也没事吧