cloudq
发表于 2004-7-7 16:51:12
已经传到论坛Ftp具体资料参考http://wifi.com.ar
cloudq
发表于 2004-7-7 16:52:46
mgd: commit completeSetting initial options:debugger_on_panic=NO debugger_on_break=NO.Doing initial network setup: hostname.Initial interface configuration:fxp1: Multicast addr command failedadditional daemons: syslogd.checking for core dump...savecore: Router rebooting after a normal shutdown....Additional routing options:.Doing additional network setup:.Starting final network daemons:.setting ldconfig path: /usr/libstarting standard daemons: cron.Initial rc.i386 initialization: microcode kld.rc.i386 configuring syscons:.Local package initialization:.starting local daemons:.Tue Jul6 21:58:07 GMT 2004Amnesiac (ttyd0)login: admi root--- JUNOS 6.2R2.4 built 2004-03-19 13:39:35 UTCTerminal type? root# ser ^unknown command.root# ser ^unknown command.root# ser ?Possible completions:set Set a parameterroot# se show ver ^syntax error.root# exit sExiting configuration moderoot> show version Model: oliveJUNOS Base OS boot JUNOS Base OS Software Suite JUNOS Kernel Software Suite JUNOS Packet Forwarding Engine Support (M20/M40) JUNOS Routing Software Suite JUNOS Online Documentation root> show version Model: oliveJUNOS Base OS boot JUNOS Base OS Software Suite JUNOS Kernel Software Suite JUNOS Packet Forwarding Engine Support (M20/M40) JUNOS Routing Software Suite JUNOS Online Documentation root> ?Possible completions:clear Clear information in the systemconfigure Manipulate software configuration informationfile Perform file operationshelp Provide help informationmonitor Show real-time debugging informationmtrace Trace multicast path from source to receiverping Ping remote targetquit Exit the management sessionrequest Make system-level requestsrestart Restart software processset Set CLI properties, date/time, craft interface messageshow Show system informationssh Start secure shell on another hoststart Start shelltelnet Telnet to another hosttest Perform diagnostic debuggingtraceroute Trace route to remote hostroot> show firewall Filter: __default_bpdu_filter__ root> file configure Entering configuration moderoot# ?Possible completions: Execute this commandactivate Remove the inactive tag from a statementannotate Annotate the statement with a commentcommit Commit current set of changescopy Copy a statementdeactivate Add the inactive tag to a statementdelete Delete a data elementedit Edit a sub-elementexit Exit from this levelhelp Provide help informationinsert Insert a new ordered data elementload Load configuration from ASCII filequit Quit from this levelrename Rename a statementrollback Roll back to previous committed configurationrun Run an operational-mode commandsave Save configuration to ASCII fileset Set a parametershow Show a parameterstatus Show users currently editing configurationtop Exit to top level of configurationup Exit one level of configuration---(more 95%)--- wildcard Wildcard operationsroot# f ^unknown command.root# f i ^unknown command.root# fi ?Possible completions: Execute this commandactivate Remove the inactive tag from a statementannotate Annotate the statement with a commentcommit Commit current set of changescopy Copy a statementdeactivate Add the inactive tag to a statementdelete Delete a data elementedit Edit a sub-elementexit Exit from this levelhelp Provide help informationinsert Insert a new ordered data elementload Load configuration from ASCII filequit Quit from this levelrename Rename a statementrollback Roll back to previous committed configurationrun Run an operational-mode commandsave Save configuration to ASCII fileset Set a parametershow Show a parameterstatus Show users currently editing configurationtop Exit to top level of configurationup Exit one level of configuration---(more 95%)--- wildcard Wildcard operationsroot# run ?Possible completions:clear Clear information in the systemfile Perform file operationsmonitor Show real-time debugging informationmtrace Trace multicast path from source to receiverping Ping remote targetquit Exit the management sessionrequest Make system-level requestsrestart Restart software processset Set CLI properties, date/time, craft interface messageshow Show system informationssh Start secure shell on another hoststart Start shelltelnet Telnet to another hosttest Perform diagnostic debuggingtraceroute Trace route to remote hostroot# run set firewall ?Possible completions:+ apply-groups Groups from which to inherit configuration data+ apply-groups-exceptDon't inherit configuration data from these groups> family Protocol family> filter Define an IPv4 firewall filter> policer Policer template definitionroot# set firewall policer ?Possible completions: Policer nameroot# set firewall policer show interfaces fxp0 { unit 0 { family inet { address 10.37.144.18/24; } }}root# ei ^unknown command.root# ei dit ?Possible completions:> access Network access configuration> accounting-options Accounting data configuration> applications Define applications by protocol characteristics> chassis Chassis configuration> class-of-service Class-of-service configuration> firewall Define a firewall configuration> forwarding-options Configure options to control packet sampling> groups Configuration groups> interfaces Interface configuration> logical-routers Logical routers> policy-options Routing policy option configuration> protocols Routing protocol configuration> routing-instances Routing instance configuration> routing-options Protocol-independent routing option configuration> services Service PIC applications settings> snmp Simple Network Management Protocol (SNMP) configuration> system System parametersroot# edit services ?Possible completions: Execute this command> adaptive-services-picsAdaptive Services PIC daemon configuration> ids Configure the intrusion detection system> nat Configure Network Address Translation> service-set Define a service set> stateful-firewall Configure stateful firewall services| Pipe through a commandroot# edit services nat ?Possible completions: Execute this command> pool Define a NAT pool> rule Define a NAT rule> rule-set Defines a set of NAT rules| Pipe through a commandroot# edit services nat rename exit Exiting configuration moderoot> re ^'re' is ambiguous.Possible completions:request Make system-level requestsrestart Restart software processroot> re u qui ^unknown command.root> requi est ?Possible completions:chassis Perform chassis-specific operationsmessage Send text message to other usersrouting-engine Log in to Routing Engineservices Perform service application operationssupport Perform JUNOS support taskssystem Perform system-level operationsroot> request system ?Possible completions:configuration Request operation on system configurationhalt Halt the systemlogout Forcibly end user's CLI login sessionpartition Partition storage mediareboot Reboot the systemsnapshot Archive data and executable areassoftware Perform system software extension or upgraderoot> request system reboot Reboot the system ? (no) yes shutdown: Shutdown NOW! *** FINAL System shutdown message from root@ *** System going down IMMEDIATELY root> Jul6 22:02:33 init: syslogd (PID 2059) exited with status=0 Normal ExitWaiting (max 60 seconds) for system process `bufdaemon' to stop...stoppedWaiting (max 60 seconds) for system process `syncer' to stop...stoppedsyncing disks... 4 3 1 doneUptime: 5m36sata0: Spinning down devices. Please wait...ata2: Spinning down devices. Please wait...Rebooting...Console: serial portBIOS drive C: is disk0BIOS 639kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(builder@iaculi.juniper.net, Fri Mar 19 13:30:21 GMT 2004)|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/Console: serial portBIOS drive C: is disk0BIOS 639kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(builder@cecrops.juniper.net, Thu Jul 24 02:09:25 GMT 2003)|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/kernel text=0x33b247 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x273d8+0x49c88 \|/-\|/-\|/-\|/-\|/-\syms= Loader Quick Help ----------------- The boot order is PCMCIA or floppy -> Flash -> Disk -> Lan -> back to PCMCIA or floppy. Typing reboot from the command prompt will cycle through the boot devices. On some models, you can set the next boot device using the nextboot command: nextboot compact-flash | diskFor more information, use the help command: help Hit to boot immediately, or space bar for command prompt.Booting in 9 seconds... Booting in 8 seconds... Booting ... /-\|/-\|Copyright ?1996-2001, Juniper Networks, Inc.All rights reserved.Copyright ?1992-2001 The FreeBSD Project.Copyright ?1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved.JUNOS 6.0R1.3 #0: 2003-07-24 02:20:37 UTC builder@cecrops.juniper.net:/build/cecrops-d/6.0R1.3/obj-i386/sys/compile/JUNIPERTimecounter "i8254"frequency 1193182 HzTimecounter "TSC"frequency 349180821 HzCPU: Pentium II/Pentium II Xeon/Celeron (349.18-MHz 686-class CPU)Origin = "GenuineIntel"Id = 0x652Stepping = 2Features=0x183f9ffreal memory= 268435456 (262144K bytes)sio0: gdb debugging portavail memory = 255840256 (249844K bytes)Olive CPUPreloaded elf kernel "kernel" at 0xc0531000.DEVFS: ready for devicesPentium Pro MTRR support enabledmd0: Malloc disknpx0:on motherboardnpx0: INT 16 interfacepcib0:on motherboardpci0:on pcib0pcib1:at device 1.0 on pci0pci1:on pcib1pci1:at 0.0 irq 11fxp0:port 0x2000-0x201f mem 0x40100000-0x401fffff,0x40200000-0x40200fff irq 11 at device 10.0 on pci0fxp1:port 0x2060-0x207f mem 0x42000000-0x420fffff,0x42100000-0x42100fff irq 11 at device 14.0 on pci0isab0:at device 20.0 on pci0isa0:on isab0atapci0:port 0x2040-0x204f at device 20.1 on pci0ata0: at 0x1f0 irq 14 on atapci0pci0:at 20.2 irq 11smb0:port 0xfc00-0xfc0f at device 20.3 on pci0fdc0:at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0ata2 at port 0x170-0x177,0x376 irq 15 on isa0atkbdc0:at port 0x60,0x64 on isa0atkbd0:flags 0x1 irq 1 on atkbdc0psm0:irq 12 on atkbdc0psm0: model IntelliMouse, device ID 3vga0:at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0sc0:at flags 0x100 on isa0sc0: VGA sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0sio0: type 16550A, consolesio1: configured irq 5 not in bitmap of probed irqs 0sio2 at port 0x2f8-0x2ff irq 3 on isa0sio2: type 16550Asio3: configured irq 7 not in bitmap of probed irqs 0fxp0: Ethernet address 00:08:c7:81:44:d7fxp1: Ethernet address 00:a0:c9:75:bc:6eDEVFS: ready to runad0: 1547MB at ata0-master using PIO3ata2-slave:CDROM device - NO DRIVER!Mounting root from ufs:/dev/ad0s1aMounted jbase package on /dev/vn0...Mounted jkernel package on /dev/vn1...Mounted jpfe package on /dev/vn2...Mounted jdocs package on /dev/vn3...Mounted jroute package on /dev/vn4...swapon: adding /dev/ad0s1b as swap deviceAutomatic reboot in progress.../dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1a: clean, 82937 free /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1e: clean, 12116 free (49 frags, 10361 blocks, 0.0% fragmentation)(20 frags, 1512 blocks, 0.2% fragmentation)(49 frags, 10361 blocks, 0.0% fragmentation)/dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1f: clean, 954176 free (160 frags, 119252 blocks, 0.0% fragmentation)tunefs: soft updates setmgd: error: Cannot stat configuration file: /config/juniper.confWarning: Commit failed, activating partial configuration.Warning: Edit the router configuration to fix these errors.cp: /var/db/juniper.db: No such file or directorySetting initial options:debugger_on_panic=NO debugger_on_break=NO.Doing initial network setup: hostname.Initial interface configuration:additional daemons: syslogd.Additional routing options:.Doing additional network setup:.Starting final network daemons:.setting ldconfig path: /usr/libstarting standard daemons: cron.Initial rc.i386 initialization:.rc.i386 configuring syscons:.Local package initialization:.starting local daemons:.Tue Jul6 23:25:37 GMT 2004Jul6 23:25:37 dcd: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryJul6 23:25:37 init: process_mode mode=BOTH cmd=internal-routing-service master_mode=-1 Jul6 23:25:42 Amnesiac (ttyd0)login: Jul6 23:25:46 init: mib-process (PID 2120) startedJul6 23:25:46 snmpd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:47 snmpd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database Could not open configuration database Jul6 23:25:47 snmpd: SNMPD_CONFIG_ERROR: Configuration database has errorsJul6 23:25:47 snmpd: SNMPD_TRAP_COLD_START: trap_generate_cold: SNMP trap: cold start Jul6 23:25:48 chassisd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:48 chassisd: CHASD_DDL_ACCESS_ERROR: can't open ddl Could not open configuration database Jul6 23:25:48 chassisd: CHASSISD_CONFIG_INIT_ERROR: Problems with configuration file '/var/etc/chassisd.conf'; using defaults Jul6 23:25:49 lmpd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:49 lmpd: LMPD_PARSE_ERROR: Configuration database open failure: Could not open configuration databaseJul6 23:25:50 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:50 dfwd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:50 fsad: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:50 fsad: FSAD_CONFIG_ERROR: Reason: 'Opening configuration database' Could not open configuration databaseJul6 23:25:50 /usr/sbin/sampled: Opening configuration database Could not open configuration database Jul6 23:25:50 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:50 /usr/sbin/sampled: Opening configuration database Could not open configuration database Jul6 23:25:50 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:50 /usr/sbin/sampled: Opening configuration database Could not open configuration database Jul6 23:25:51 cosd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:51 cosd: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Jul6 23:25:51 mib2d: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:51 mib2d: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database Could not open configuration database Jul6 23:25:51 mib2d: MIB2D_CONFIG_CHECK_FAILED: main: configuration database has errorsJul6 23:25:52 rpd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Configuration database open failure: Could not open configuration database Jul6 23:25:53 dcd: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryJul6 23:25:53 dcd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:53 dcd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Jul6 23:25:54 lmpd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:54 lmpd: LMPD_PARSE_ERROR: Configuration database open failure: Could not open configuration databaseJul6 23:25:55 dfwd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:56 last message repeated 2 timesJul6 23:25:56 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:56 /usr/sbin/sampled: Opening configuration database Could not open configuration database Jul6 23:25:56 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:56 /usr/sbin/sampled: Opening configuration database Could not open configuration database Jul6 23:25:56 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:56 /usr/sbin/sampled: Opening configuration database Could not open configuration database Jul6 23:25:56 cosd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:56 cosd: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Jul6 23:25:57 rpd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Configuration database open failure: Could not open configuration database Jul6 23:25:58 dcd: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryJul6 23:25:58 dcd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:58 dcd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Jul6 23:25:58 init: interface-control is thrashing, not restartedJul6 23:25:59 init: ntp is thrashing, not restartedJul6 23:25:59 lmpd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:25:59 lmpd: LMPD_PARSE_ERROR: Configuration database open failure: Could not open configuration databaseJul6 23:26:00 init: helper is thrashing, not restartedJul6 23:26:01 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:26:01 /usr/sbin/sampled: Opening configuration database Could not open configuration database Jul6 23:26:01 cosd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:26:01 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:26:01 cosd: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Jul6 23:26:01 /usr/sbin/sampled: Opening configuration database Could not open configuration database Jul6 23:26:01 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:26:01 /usr/sbin/sampled: Opening configuration database Could not open configuration database Jul6 23:26:02 rpd: UI_CONFIGURATION_ERROR: Process: , path: , statementAmnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Jul6 23:26:04 lmpd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:26:04 lmpd: LMPD_PARSE_ERROR: Configuration database open failure: Could not open configuration databaseJul6 23:26:04 init: link-management is thrashing, not restartedAmnesiac (ttyd0)login: Jul6 23:26:05 init: sonet-aps is thrashing, not restartedAmnesiac (ttyd0)login: Jul6 23:26:06 cosd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:26:06 cosd: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Jul6 23:26:06 init: class-of-service is thrashing, not restartedJul6 23:26:06 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:26:06 /usr/sbin/sampled: Opening configuration database Could not open configuration databasAmnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Jul6 23:26:07 rpd: UI_Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: root--- JUNOS 6.0R1.3 built 2003-07-24 02:20:37 UTCTerminal type? root# edit se ^'se' is ambiguous.Possible completions:> security > services Service PIC applications settingsroot# edit se er ^syntax error, expectingor .root# edit seer rvices fi ^syntax error, expecting , '|', , or .root# edit services fi ir i r ^syntax error, expecting , '|', , or .root# edit services fir ^syntax error, expecting , '|', , or .root# edit services f ?Possible completions: Execute this command> adaptive-services-picsAdaptive Services PIC daemon configuration> ids Configure the intrusion detection system> nat Configure Network Address Translation> service-set Define a service set> stateful-firewall Configure stateful firewall services| Pipe through a commandroot# edit services nat ?Possible completions: Execute this command> pool Define a NAT pool> rule Define a NAT rule> rule-set Defines a set of NAT rules| Pipe through a commandroot# edit services nat exit The configuration has been changed but not committedExit with uncommitted changes? (yes) no Exit abortedroot# ls ^unknown command.root# exit The configuration has been changed but not committedExit with uncommitted changes? (yes) no Exit abortedroot# exit The configuration has been changed but not committedExit with uncommitted changes? (yes) yes Exiting configuration moderoot> exit root@% ls.cshrc .login .profileroot@% cd /etcroot# set ?Possible completions:> access Network access configuration> accounting-options Accounting data configuration> applications + apply-groups Groups from which to inherit configuration data> chassis Chassis configuration> class-of-service Class-of-service configuration> firewall Define a firewall configuration> forwarding-options Configure options to control packet sampling> groups Configuration groups> interfaces Interface configuration> logical-routers Logical routers> policy-options Routing policy option configuration> protocols Routing protocol configuration> routing-instances Routing instance configuration> routing-options Protocol-independent routing option configuration> security > services Service PIC applications settings> snmp Simple Network Management Protocol (SNMP) configuration> system System parametersroot# set interfaces ?Possible completions: Interface name+ apply-groups Groups from which to inherit configuration data> traceoptions Interface trace optionsroot# set interfaces fx0 p0 ?Possible completions:accounting-profile Accounting profile name+ apply-groups Groups from which to inherit configuration datadescription Text description of interfacedisable Disable this interfacegratuitous-arp-replyEnable gratuitous ARP reply> hold-time Hold time for link up and link downlink-mode Link operational modemac Hardware MAC addressno-gratuitous-arp-replyDon't enable gratuitous ARP replyno-gratuitous-arp-requestIgnore gratuitous ARP requestno-traps Don't enable SNMP notifications on state changesspeed Link speed> traceoptions Interface trace optionstraps Enable SNMP notifications on state changes> unit Logical interfacevlan-tagging 802.1Q VLAN tagging supportroot# set interfaces fxp0 ui ^syntax error.root# set interfaces fxp0 ui nit 0 ?Possible completions: Execute this commandaccounting-profile Accounting profile name+ apply-groups Groups from which to inherit configuration databandwidth Logical unit bandwidth (informational only)description Text description of the interfacedisable Disable this logical interfaceencapsulation Logical link-layer encapsulation> family Protocol familyno-traps Don't enable SNMP notifications on state changespassive-monitor-modeUse interface to tap packets from another routertraps Enable SNMP notifications on state changesvlan-id Virtual LAN identifier value for 802.1Q VLAN tags| Pipe through a commandroot# set interfaces fxp0 unit 0 family ?Possible completions:> ccc Circuit cross-connect parameters> inet IPv4 parameters> inet6 IPv6 protocol parameters> iso OSI ISO protocol parameters> mpls MPLS protocol parameters> tcc Translational cross-connect parameters> vpls Virtual Private LAN Service (VPLS) parametersroot# set interfaces fxp0 unit 0 family inet ?Possible completions: Execute this command> address Interface address/destination prefix+ apply-groups Groups from which to inherit configuration data> filter Packet filteringno-redirects Do not redirect traffic> policer Interface policingprimary Candidate for primary interface in system| Pipe through a commandroot# set interfaces fxp0 unit 0 family inet address ?Possible completions: Interface address/destination prefixroot# set interfaces fxp0 unit 0 family inet address 10.37.144.18/21 root# commit Jul6 23:28:49 dcd: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryJul6 23:28:49 dcd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:28:49 dcd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Jul6 23:28:50 rpd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Configuration database open failure: Could not open configuration database Jul6 23:28:50 cosd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:28:50 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:28:50 cosd: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Jul6 23:28:50 lmpd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:28:50 /usr/sbin/sampled: Opening configuration database Could not open configuration database Jul6 23:28:50 lmpd: LMPD_PARSE_ERROR: Configuration database open failure: Could not open configuration databaseJul6 23:28:50 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:28:51 /usr/sbin/sampled: Opening configuration database Could not open configuration database Jul6 23:28:51 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryJul6 23:28:51 /usr/sbin/sampled: Opening configuration database Could not open configuration database commit completeroot# root# root# root# root# exit Exiting configuration modeJul6 23:28:57 dcd: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryJul6 23:28:57 dcd: COSD_CONF_OPEN_FAILURE: Unable to open: /var/etc/cosd.conf, using default CoS forwarding classes, do 'commit full' in cli to avoid this messageJul6 23:28:57 cosd: COSD_CONF_OPEN_FAILURE: Unable to open: /var/etc/cosd.conf, using default CoS forwarding classes, do 'commit full' in cli to avoid this messagefxp1: Multicast addr command failedroot> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> root> e exit root@% pwd/var/tmproot@% fJul6 23:29:14 init: ntp is thrashing, not restartedtpftp> ftp> ftp 10.37.144.18 (no) yes Reboot consistency check bypassed - jinstall 6.2R2.4 will complete installation upon rebootshutdown: Shutdown NOW! *** FINAL System shutdown message from root@ *** System going down IMMEDIATELY root> Jul6 23:35:06 rpd: RPD_SNMP_SARECV: snmp_epi_recv: error from sam_recv: 0Waiting (max 60 seconds) for system process `bufdaemon' to stop...stoppedWaiting (max 60 seconds) for system process `syncer' to stop...stoppedsyncing disks... 22 21 20 14 7 1 doneUptime: 10m11sata0: resetting devices .. doneata0: Spinning down devices. Please wait...ata2: Spinning down devices. Please wait...Rebooting...Console: serial portBIOS drive C: is disk0BIOS 639kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(builder@iaculi.juniper.net, Fri Mar 19 13:30:21 GMT 2004)|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/boot/installer text=0x2128c5 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x20ea8+0x29f98 \|/-\|/-\|/-\|/-\syms=|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|Hit to boot immediately, or space bar for command prompt.Booting ... Copyright ?1996-2001, Juniper Networks, Inc.All rights reserved.Copyright ?1992-2001 The FreeBSD Project.Copyright ?1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved.JUNOS 6.2R2.4 #0: 2004-03-19 13:32:37 UTC builder@iaculi.juniper.net:/build/iaculi-c/6.2R2.4/obj-i386/sys/compile/MFSTimecounter "i8254"frequency 1193182 HzTimecounter "TSC"frequency 349180872 HzCPU: Pentium II/Pentium II Xeon/Celeron (349.18-MHz 686-class CPU)Origin = "GenuineIntel"Id = 0x652Stepping = 2Features=0x183f9ffreal memory= 268435456 (262144K bytes)sio0: gdb debugging portavail memory = 253927424 (247976K bytes)Olive CPUPreloaded elf kernel "installer" at 0xc0718000.Preloaded md_image "/boot/mdimg" at 0xc07180a0.DEVFS: ready for devicesPentium Pro MTRR support enabledmd0: Preloaded image3504128 bytes at 0xc03bea60md1: Malloc disknpx0:on motherboardnpx0: INT 16 interfacepcib0:on motherboardpci0:on pcib0pcib1:at device 1.0 on pci0pci1:on pcib1pci1:at 0.0 irq 11fxp0:port 0x2000-0x201f mem 0x40100000-0x401fffff,0x40200000-0x40200fff irq 11 at device 10.0 on pci0fxp1:port 0x2060-0x207f mem 0x42000000-0x420fffff,0x42100000-0x42100fff irq 11 at device 14.0 on pci0isab0:at device 20.0 on pci0isa0:on isab0atapci0:port 0x2040-0x204f at device 20.1 on pci0ata0: at 0x1f0 irq 14 on atapci0pci0:at 20.2 irq 11smb0:port 0xfc00-0xfc0f at device 20.3 on pci0fdc0:at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0ata2 at port 0x170-0x177,0x376 irq 15 on isa0atkbdc0:at port 0x60,0x64 on isa0atkbd0:flags 0x1 irq 1 on atkbdc0psm0:irq 12 on atkbdc0psm0: model IntelliMouse, device ID 3vga0:at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0sc0:at flags 0x100 on isa0sc0: VGA sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0sio0: type 16550A, consolesio1 at port 0x2f8-0x2ff irq 3 on isa0sio1: type 16550Afxp0: Ethernet address 00:08:c7:81:44:d7fxp1: Ethernet address 00:a0:c9:75:bc:6eDEVFS: ready to runad0: 1547MB at ata0-master using PIO3ata2-slave:CDROM device - NO DRIVER!Mounting root from cd9660:/dev/md0cDisabling watchdog=================== Bootstrap installer starting ===================Initialized the environmentRouting engine model is OliveSourcing /sbin/OliveDiscovered that flash disk =, hard disk = ad0Disk to install is wd0 Setting ospackage=jboot-6.2R2.4, configpackage=configs-6.2R2.4.tgzSetting packlist=jbundle-6.2R2.4-export.tgzSetting isupgrade=jboot-6.2R2.4Packages and configurations copied to /tmpCleaning up wd0...Running newfs on wd0s1a...Warning: 3612 sector(s) in last cylinder unallocated/dev/wd0s1a: 225764 sectors in 56 cylinders of 1 tracks, 4096 sectors 110.2MB in 4 cyl groups (16 c/g, 32.00MB/g, 6912 i/g)super-block backups (for fsck -b #) at: 32, 65568, 131104, 196640Running newfs on wd0s1e...Warning: 3588 sector(s) in last cylinder unallocated/dev/wd0s1e: 25084 sectors in 7 cylinders of 1 tracks, 4096 sectors 12.2MB in 1 cyl groups (16 c/g, 32.00MB/g, 3136 i/g)super-block backups (for fsck -b #) at: 32Installing disk label on wd0Installing JUNOS on wd0...Making root filesystem...Adding jbase...Mounted jbase on /mnt/packages/mnt/jbase (/dev/vn0)Adding jbundle-6.2R2.4-export.tgz...Requested space: 180779736 bytes, free space: 694097920 bytes in /var/tmp/instmp.KDlUgrRunning requirements file first for jbundle-6.2R2.4-export..Running pre-install for jbundle-6.2R2.4-export..extract: Package name is jbundle-6.2R2.4-exportextract: CWD to .Running post-install for jbundle-6.2R2.4-export..Verified MD5 checksum of jbase-6.2R2.4.tgzVerified MD5 checksum of jboot-6.2R2.4Verified MD5 checksum of jdocs-6.2R2.4.tgzVerified MD5 checksum of jkernel-6.2R2.4.tgzVerified MD5 checksum of jpfe-6.2R2.4.tgzVerified MD5 checksum of jroute-6.2R2.4.tgzAdding jkernel...Adding jpfe...Adding jdocs...Adding jroute...Restoring backed up configurations...Unmounted /mnt/packages/mnt/jbase24: TerminatedWaiting (max 60 seconds) for system process `bufdaemon' to stop...stoppedWaiting (max 60 seconds) for system process `syncer' to stop...stoppedsyncing disks... doneUptime: 2m37sata0: Spinning down devices. Please wait...ata2: Spinning down devices. Please wait...Rebooting...Console: serial portBIOS drive C: is disk0BIOS 639kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(builder@iaculi.juniper.net, Fri Mar 19 13:30:21 GMT 2004)|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/kernel text=0x496b56 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-&#
ghg123456
发表于 2004-7-9 10:46:31
JUNOS 是好东西啊
页:
[1]