多线端口映射

老树昏鸦

应该还是端口映射的问题，搞了好几天，头大了，还是没有成功。

这是我现在的端口映射规则，童鞋们帮忙分析下，哪里有问题。四线PCC

/ip firewall nat
add action=dst-nat chain=dstnat comment="" disabled=no dst-port=3389 \
    in-interface=pppoe-out1 protocol=tcp to-addresses=192.168.1.88 to-ports=\
    3389
add action=dst-nat chain=dstnat comment="" disabled=no dst-port=3389 \
    in-interface=pppoe-out2 protocol=tcp to-addresses=192.168.1.88 to-ports=\
    3389
add action=dst-nat chain=dstnat comment="" disabled=no dst-port=3389 \
    in-interface=pppoe-out3 protocol=tcp to-addresses=192.168.1.88 to-ports=\
    3389
add action=dst-nat chain=dstnat comment="" disabled=no dst-port=3389 \
    in-interface=pppoe-out4 protocol=tcp to-addresses=192.168.1.88 to-ports=\
    3389
add action=masquerade chain=srcnat comment="" disabled=no out-interface=LAN \
    src-address=192.168.1.88

/ip firewall mangle
add action=mark-connection chain=prerouting comment=protmap-3389 \
    connection-mark=other disabled=no in-interface=pppoe-out1 \
    new-connection-mark=protmap passthrough=yes
add action=mark-connection chain=prerouting comment="" connection-mark=other \
    disabled=no in-interface=pppoe-out2 new-connection-mark=protmap \
    passthrough=yes
add action=mark-connection chain=prerouting comment="" connection-mark=other \
    disabled=no in-interface=pppoe-out3 new-connection-mark=protmap \
    passthrough=yes
add action=mark-connection chain=prerouting comment="" connection-mark=other \
    disabled=no in-interface=pppoe-out4 new-connection-mark=protmap \
    passthrough=yes
add action=mark-routing chain=prerouting comment="" connection-mark=protmap \
    disabled=no in-interface=LAN new-routing-mark=protmap-router passthrough=\
    no

qile

ction=dst-nat chain=dstnat comment="" disabled=no dst-port=3389 \
     in-interface=pppoe-out1 protocol=tcp to-addresses=192.168.1.88 to-ports=\
     3389
add action=dst-nat chain=dstnat comment="" disabled=no dst-port=3389 \
     in-interface=pppoe-out2 protocol=tcp to-addresses=192.168.1.88 to-ports=\
     3389


都disable（就是禁用） 后，然后 设置可以内网192.168.1.88可以上网后 加
/ip firewall nat
add action=dst-nat chain=dstnat comment="wlanipchang" disabled=no dst-address=\
    1.2.2.2 dst-port=3389 protocol=tcp to-addresses=192.168.1.88 \
    to-ports=3389

1.2.2.2 为你外网ip 地址 如果是adsl拨号 就得设置自动改此ip地址为对应的 adsl外网ip

试试这个自动更新命令

:global newipaddress
:global lodipaddress
:set newipaddress [/ip address get [/ip address find dynamic=yes interface="pppoe-out1"] address]
:set newipaddress [:pick $newipaddress 0 ([:len $newipaddress] -3)]
:set lodipaddress [/ip firewall nat get [/ip firewall nat find comment="wlanipchang"] dst-address]
:if ($newipaddress != $lodipaddress) do={/ip firewall nat set [/ip firewall nat find comment="wlanipchang"] dst-address=$newipaddress}
:log info "〖adsl映射修改完毕〗"