Key RouterOS 3.30 lev 4 + extra ch

wumi001

Key up to 3.30
Free for all from me greeting from serbia

http://bbs.routerclub.com/viewth ... mp;extra=#pid301659

samboy

我鼎你个肺啊 成日出来呃人 TMD +NND +CNQJ

wugalang88

坏文件

zhanghui

0 Bytes

47771885

算了 还是我出来说话吧  之前 的KEY L4 的基本都没有被封 可以升级到3.30 的

心想事成

Mikrotik V3.30 License 4.
-----------------------


** Follow these steps **

1. Burn both ISO files (Mikrotik 3.20 & 3.30) to CDs.

2. Install Mikrotik 3.20, you can choose all packages BUT mpls-test, routing-test and xen. Those 3 need to be UNCHECKED at the installation screen.

3. After installation, connect using winbox and drag & drop the keygen.npk into winbox "Files" menu.

4. Reboot the OS. using System > Reboot.

5. Now make sure that the keygen package is installed properly by checking System > Packages, make sure it's listed.

6. Assign an IP address to the interface you're connecting to (IP > Addresses), and also to your own PC. Both IPs should be in the same subnet of course.

7. CMD to the "Key" folder and initiate the following command:  ssh.exe <ip address>  , where "ip address" is the IP address you assigned to the Mikrotik OS. interface.

8. Under the \w> prompt type:  roskey /dev/hda 7PEZ-EYN

9. The cracking process duration greatly varies as it very much depends on the hardware capabilities, mainly the CPU. Anyway, wait till you get the message:  ID is:7PEZ-EYN Work fine!!!

10. Reboot the OS.

11. Install Mikrotik 3.30, and make sure that the 3 above mentioned packages are UNCHECKED.

12. Connect to winbox and goto System > License > Import key, and choose 7PEZ-EYN.key in the "Key" folder.

13. Congratulations! Now you have a fully working Mikrotik OS. V3.30 with License 4.

Enjoy!

Stilliam.

wugalang88

L4有什么限制?

supermp3

太美的英文几吾错！解释得非常详细，如果国人，未知是否有这样的待遇！或者我们到mikrotik官方论坛，不知是否有这样的待遇，我就听闻国人到mikrotik提问被冷落的事情！

心想事成

http://d.namipan.com/d/147f29704 ... e02a1de76b370fc0300
才找到一个速度更快的算号器，节省你的等待时间。大家试下是不是真的。

cssson

回复 10# 想得太美


    这个方法怎么用啊 是支持所有版本吗

gaohz521

1. 1。 Burn both ISO files (Mikrotik 3.20 & 3.30) to CDs. 两个ISO文件刻录（Mikrotik 3.20和3.30）的光盘。

2. 2。 Install Mikrotik 3.20, you can choose all packages BUT mpls-test, routing-test and xen. 安装Mikrotik 3.20，你可以选择 ， 但MPLS的测试所有的包，路由，测试和Xen。 Those 3 need to be UNCHECKED at the installation screen. 那3中未检查的需要在安装屏幕。

3. 3。 After installation, connect using winbox and drag & drop the keygen.npk into winbox "Files" menu. 安装后，连接使用永保时和拖放到永保时的keygen.npk“文件”菜单。

4. 4。 Reboot the OS. 重新启动操作系统。 using System > Reboot. 使用系统 “> 重新启动。

5. 5。 Now make sure that the keygen package is installed properly by checking System > Packages, make sure it's listed. 现在确保凯基正确安装包通过检查系统 “> 软件包，请确保它的上市。

6. 6。 Assign an IP address to the interface you're connecting to (IP > Addresses), and also to your own PC. 分配一个IP地址的接口连接到你（的IP“地址），并到你的电脑。 Both IPs should be in the same subnet of course. 这两个IP地址应在同一子网的过程。

7. 7。 CMD to the "Key" folder and initiate the following command: ssh.exe <ip address> , where "ip address" is the IP address you assigned to the Mikrotik OS. 加利福尼亚的“钥匙”，并启动文件夹下面的命令：ssh.exe <IP地址>，其中“IP地址”是您的IP地址分配给在MikroTik操作系统。 interface. 接口。

8. 8。 Under the w> prompt type: roskey /dev/hda 7PEZ-EYN 根据瓦特“提示符下键入：roskey / dev / hda的7PEZ，艾因

9. 9。 The cracking process duration greatly varies as it very much depends on the hardware capabilities, mainly the CPU. 开裂过程的持续时间大大不同 ， 因为它非常依赖于硬件功能，主要是CPU的。 Anyway, wait till you get the message: ID is:7PEZ-EYN Work fine!!! 无论如何，等到你得到消息：ID是：7PEZ -艾因做工精细！

10. 10。 Reboot the OS. 重新启动操作系统。

11. 11。 Install Mikrotik 3.30, and make sure that the 3 above mentioned packages are UNCHECKED. 安装Mikrotik 3.30，并确保上述3包是听之任之。

12. 12。 Connect to winbox and goto System > License > Import key, and choose 7PEZ-EYN.key in the "Key" folder. 连接到永保时和goto系统 “> 许可证>”输入键，并选择7PEZ在“关键”文件夹EYN.key。

13. 13。 Congratulations! 祝贺！ Now you have a fully working Mikrotik OS. 现在你拥有了一个全Mikrotik操作系统。 V3.30 with License 4. V3.30的许可4

b128777

跟先前roskey皆一樣， 所以是可以的!

sumardi2000

才找到一个速度更快的算号器，节省你的等待时间。大家试下是不是真的。
想得太美 发表于 2010-3-28 22:09

                               
登录/注册后可看大图

哥哥请您发送到我的电子邮件在sumardi2000@qq.com

75122889

已经用起来了，3.30 L4

xiao3ma

3.30还是7位id吗？用英文google搜索了一下，用这个办法还真有成功的。