[分享]CF-IDE转接DIY，，附图纸。

zjwxzx

我怎么看不见图？

zjwxzx

我怎么看不见图片啊？

falcon_lxy

哪有图，我没看到呢？给我一套吧！谢谢
我来试试吧，试过后给你说。
我的联系QQ：125906866，长期在线，隐身。
email：falcon_lxy@tfol.com

bow

PCMCIA/CF/IDE针脚定义和对应关系，转贴在此：
－－－－－－－－－－－－－－－－－－－－－－－－－－－
Connections
The following is a pin definition & connection table for CF/PCMCIA cards in "True-IDE" mode. "xx" means that this signal has no equivalent connection in this standard.

The following pins are straight through connections:
PCMCIA..CF......IDE...Signal Name
30------21------17....D0
31------22------15....D1
32------23------13....D2
2-------2-------11....D3
3-------3-------9.....D4
4-------4-------7.....D5
5-------5-------5.....D6
6-------6-------3.....D7
64------47------4.....D8
65------48------6.....D9
66------49------8.....D10
37------27------10....D11
38------28------12....D12
39------29------14....D13
40------30------16....D14
41------31------18....D15
29------20------35....A0
28------19------33....A1
27------18------36....A2
16------37------31....INTRQ
33------24------32....-IOCS16
44------34------25....-IORD
45------35------23....-IOWR
58------41------1.....-RESET
59------42------27....IORDY
62------45------39....DASP
63------46------34....-PDIAG
7-------7-------37....-CE1 select 0x1Fx
42------32------38....-CE2 select 0x3Fx

The following pins should be connected to power, ground or not at all:
PCMCIA..CF......IDE...Signal Name..connect to
26------17------xx....A3...........=GND
25------16------xx....A4...........=GND
24------15------xx....A5...........=GND
23------14------xx....A6...........=GND
22------12------xx....A7...........=GND
12------11------xx....A8...........=GND
11------10------xx....A9...........=GND
8-------8-------xx....A10..........=GND
1-------1-------xx....Power GND....=GND
34------xx------xx....Power GND....=GND
35------xx------xx....Power GND....=GND
68------50------xx....Power GND....=GND
17------13------xx....Power VCC....=VCC
51------38------xx....Power VCC....=VCC
9-------9-------xx....-OE..........=GND->selects "True-IDE"
15------36------xx....-WE..........=VCC
61------44------xx....-REG.........=VCC
56------39------xx....-CSEL........=GND->master/=n.c.->slave
36------26------xx....-CD1.........=not connected
67------25------xx....-CD2.........=not connected
43------33------xx....-VS1.........=not connected
57------40------xx....-VS2.........=not connected
60------43------xx....-INPACK......=not connected
xx------xx------2.....GND..........=GND
xx------xx------19....GND..........=GND
xx------xx------22....GND..........=GND
xx------xx------24....GND..........=GND
xx------xx------26....GND..........=GND
xx------xx------30....GND..........=GND
xx------xx------40....GND..........=GND
xx------xx------20....KEY..........=missing pin in IDE connector
xx------xx------21....DMAREQ.......=not connected
xx------xx------28....SPSYNC.......=not connected
xx------xx------29....DMACK........=not connected

All other pins of PCMCIA are not connected. Connect all pins of IDE and CF/PCMCIA connector marked GND to the GND pin of the power supply connector. Connect all pins of the CF/PCMCIA connector marked VCC to the +5V pin of the power supply connector. PCMCIA/CF cards DO NOT SUPPORT DMA; they can only be used in pio mode

ttsee

没看到图啊

dragoneagle

我也看不到图

hwdn

怎么看不到呀？

我叫笨笨

我怎么看不到图片啊。

hairge

图在哪？

qdyahoo

qiang

啊哦

哪位有图啊

taitaitai

艾 ，DIY精神可嘉 ，二手电脑上有3.5G-6G左右的旧硬盘 ，30快，便宜 ；不用这么费时了，简单方便便宜就是道理！！！

bill

硬盘像玻璃一样，太容易坏，还有噪音，哪有cf卡好
路由一定要稳定

7up13

在广州很多地方都有的，ＣＦ转ＩＤＥ卡，１５块一个．不过有些最高的要７０的，在广州买东西要懂得讲价架！

anang

看看