马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有账号?注册
×
hAP liteThe home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office. It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access, and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button. Of course, the device runs routeros with all the features, bandwidth shaping, firewall, user access control and many others. The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included. Product specificationsDetails | Product code | RB941-2nD | CPU nominal frequency | 650 MHz | CPU core count | 1 | Size of RAM | 32 MB | 10/100 Ethernet ports | 4 | 10/100/1000 Ethernet ports | None | MiniPCI slots | 0 | MiniPCI-e slots | 0 | Wireless chip model | QCA9531-BL3A-R | Wireless standards | 802.11b/g/n | Number of USB ports | 0 | Power Jack | 1 | Supported input voltage | 5 V - 5 V | PoE in | No | PoE out | No | Voltage Monitor | No | PCB temperature monitor | No | CPU temperature monitor | No | License level | 4 | Antenna gain DBI | 1.5 | Current Monitor | No | CPU | QCA9531-BL3A-R | Max Power consumption | 3W | SFP ports | None | SFP+ ports | None | Number of chains | 2 | Serial port | None | Suggested price | $21.95 | Wireless specifications2.4 GHz | | TX | RX | 1MBit/s | 22 | -96 | 11MBit/s | 22 | -89 | 6MBit/s | 20 | -93 | 54MBit/s | 18 | -74 | MCS0 | 20 | -93 | MCS7 | 16 | -71 |
Performance test resultsRB941-2nDQCA9531 100M 4 port test
ModeConfiguration64 byte512 byte1518 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)173.688.994.0385.032.5394.8
Bridging25 bridge filter rules56.729.056.1229.832.5394.8
Routingnone (fast path)160.882.394.0385.032.5394.8
Routing25 simple queues72.637.263.7260.932.5394.8
Routing25 ip filter rules34.617.733.8138.432.5394.8- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
|