|
发表于 2006-8-19 01:06:10
|
显示全部楼层
有数据库的 要求吧
- Analyze :
Brings up the DialogBox for Database Settings. The following
parameters needs to be set.
"Data source Name" :- The data source shall be storing information
about the server and the database. The Radius Server uses the data
source to give this information to the ODBC driver. The data source
can be configured using the ODBC Administrator application in the
Control panel.
"User Name" :- The Radius Server to login to the database requires
the user name. The database administrator will give the user name.
"Password" :- This is the password of the user. The database admi-
nistrator will give the password.
Radius Server uses ODBC to communicate with the Database server.
The network administrator will need to setup the ODBC data source
information, before the Radius Server manager can communicate with
the database. Please see "Requirements" section of this document
below.
"Print Records" : Enable this, if You want to print the records.
"Export Records" : Enable this if you want to store the records in
delimiter terminated files.
"Initilize" : Click this button if you want to drop the old tables
and start fresh.
"OK" : Clicking on this button, two DialogBoxes come up, if both
"Print Records" and "Export Records" are enabled. The first DialogBox
asks for type of Delimiter(Tab, Comma and Space); This DialogBox
comes up only if "Export Records"is enabled. The second DialogBox
asks for the Records to be printed and/or exported. Once all these
are done, connection is established between the Database Server and
the Radius Server; and Tables are created/modified. Once this is
succesfull, the "Print" and "Print Preview" MenuItems are enabled
if "Print Records" was enabled previously. |
|