第一次发帖，甚是不懂，求解答，小生万分感激！

zhy2155537

   条件：2条ADSL 4M 一条（不同端口，从电信盒子里接出来的）     ，刚恢复出厂设置的 ros 5.14系统  
做两条 pppoe PCC  后 只有pppoe -out1 又流量出口，另一口无流量.



有图 有设置，  求解答，小生万分感激！

zhy2155537

这是 使用的脚本设置   



/ip firewall mangle
add action=mark-connection chain=input  disabled=no in-interface=pppoe-out1 new-connection-mark=pppoe-out1-conn \
    passthrough=yes
add action=mark-connection chain=input  disabled=no in-interface=pppoe-out2 new-connection-mark=pppoe-out2-conn \
    passthrough=yes
add action=mark-routing chain=output  connection-mark=pppoe-out1-conn disabled=no new-routing-mark=to-pppoe-out1 \
    passthrough=yes
add action=mark-routing chain=output  connection-mark=pppoe-out2-conn disabled=no new-routing-mark=to-pppoe-out2 \
    passthrough=yes
add action=accept chain=prerouting  disabled=no dst-address-type=local in-interface=LAN
add action=accept chain=prerouting  disabled=no dst-address-type=local in-interface=LAN
add action=mark-connection chain=prerouting  disabled=no dst-address-type=!local in-interface=LAN new-connection-mark=\
    pppoe-out1-conn passthrough=yes per-connection-classifier=src-address-and-port:2/0
add action=mark-connection chain=prerouting  disabled=no dst-address-type=!local in-interface=LAN new-connection-mark=\
    pppoe-out2-conn passthrough=yes per-connection-classifier=src-address-and-port:2/1
add action=mark-routing chain=prerouting  connection-mark=pppoe-out1-conn disabled=no in-interface=LAN \
    new-routing-mark=to-pppoe-out1 passthrough=yes
add action=mark-routing chain=prerouting  connection-mark=pppoe-out2-conn disabled=no in-interface=LAN \
    new-routing-mark=to-pppoe-out2 passthrough=yes

/ ip route
add dst-address=0.0.0.0/0 gateway=pppoe-out1 routing-mark=to-pppoe-out1 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=pppoe-out2 routing-mark=to-pppoe-out2 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=pppoe-out1 distance=1 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=pppoe-out2 distance=2 check-gateway=ping

/ip firewall nat
add action=masquerade chain=srcnat  disabled=no out-interface=pppoe-out1
add action=masquerade chain=srcnat  disabled=no out-interface=pppoe-out2

zhy2155537

因为 身在 异乡， 在线求 解决方案！！ 不胜感谢！！

peckpock

src-address-and-port

zhy2155537

peckpock 发表于 2012-3-18 13:23

                               
登录/注册后可看大图

src-address-and-port

请教 一下，这里该写成什么呢？

zhy2155537

:(:(:(:(:(:(:(

zhy2155537

:Q:Q:Q:Q:Q

zhy2155537

哎 ，沉了沉了

tangdong

add action=mark-connection chain=prerouting  disabled=no dst-address-type=!local in-interface=LAN new-connection-mark=\
    pppoe-out1-conn passthrough=yes per-connection-classifier=src-address-and-port:2/0
add action=mark-connection chain=prerouting  disabled=no dst-address-type=!local in-interface=LAN new-connection-mark=\
    pppoe-out2-conn passthrough=yes per-connection-classifier=src-address-and-port:2/1
add action=mark-routing chain=prerouting  connection-mark=pppoe-out1-conn disabled=no in-interface=LAN \
    new-routing-mark=to-pppoe-out1 passthrough=yes
add action=mark-routing chain=prerouting  connection-mark=pppoe-out2-conn disabled=no in-interface=LAN \
    new-routing-mark=to-pppoe-out2 passthrough=yes


木有看到这几条规则，自己手动加上去

fandl

增加楼上提到的。

再删了路由表里的第3、第4条。

zhy2155537

谢谢各位啊，明天再试试啦！！