自动更改网关和防火墙地址

e_zhangiso

由于配置要求，无法设置添加默认路由=是。需要使用脚本来修改网关和防火墙地址列表。但是，以下脚本在运行时报告了错误。请大神帮忙看一看并修改它。谢谢。（7.10.2 版）


{
:local v6i "3"
:for v6ii from=1 to=$v6i do={
:local v6gateway [/ipv6 route get [/ipv6 route find comment=("pppoe-out".$v6ii)] gateway]
:set v6gateway [:pick $v6gateway 0 [:find $v6gateway "%"]]
:local v6adlist [/ipv6 firewall address-list get [/ipv6 firewall address-list find comment=("pppoe-out".$v6ii)] address]
:local v6ser [/ipv6 dhcp-client get [/ipv6 dhcp-client find interface=("pppoe-out".$v6ii) dhcp-server-v6]
:local prefix [/ipv6 dhcp-client get [/ipv6 dhcp-client find interface=("pppoe-out".$v6ii) prefix]
:if ($v6gateway != $v6ser) do={
/ipv6 route set [/ipv6 route find comment=("pppoe-out".$v6ii)] gateway=($v6ser."%".("pppoe-out".$v6ii))}
:if ($v6adlist != $prefix) do={
/ipv6 firewall address-list set [/ipv6 firewall address-list find comment=("pppoe-out".$v6ii)] address=$prefix}
}

cspm333

1. :local i [/ipv6 dhcp-c find interface="pppoe-out1"]
   
2. :local j [/ipv6 firewall address-list find list="LOCAL_IP" comment="pppoe-out1"]
   
3. :local k [/ipv6 route find gateway~"%fe80" comment="pppoe-out1"]
   
4. 
   
5. :local pf [/ipv6 dhcp-c get $i prefix]
   
6. :local gw "$[/ipv6 dhcp-c get $i dhcp-server-v6]%pppoe-out1"
   
7. 
   
8. :local addr [/ipv6 firewall address-list get $j address]
   
9. :local rgw [/ipv6 route get $k gateway]
   
10. 
    
11. :if ($addr!=$pf) do={/ipv6 firewall address-list set $j address=$pf}
    
12. :if ($rgw!=$gw) do={/ipv6 route set $k gateway=$gw}

复制代码