求助关于大猫猫脚本改进

57068368 · 发表于 2019-7-12 23:03:54

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？注册

×

###使用前请确保你当前没有使用穿透进行管理###
###请删除之前自己创建的CTS穿透VPN连接，方可使用本脚本。###
###建议5-10分钟循环执行一次。6.38.5测试通过。###
###定义CTS服务器IP###
:global ctsip 120.24.176.137
###定义CTS服务器虚拟网关###
:global ctsgw 172.34.56.1
###定义CTS服务器用户名###
:global ctsuser "user"
###定义CTS服务器密码###
:global ctspass "passwd"
###获取当前使用的CTS的VPN类型###
:global usedvpn ""
###获取当前CTS连接状态###
:global stvpn
:if ([/interface pptp-client find name=CTS-PPTP]!="") do={
:set usedvpn pptp
:set stvpn [/interface pptp-client find name=CTS-PPTP running=yes]}
:if ([/interface l2tp-client find name=CTS-L2TP]!="") do={
:set usedvpn l2tp
:set stvpn [/interface l2tp-client find name=CTS-L2TP running=yes]}
:if ([/interface sstp-client find name=CTS-SSTP]!="") do={
:set usedvpn sstp
:set stvpn [/interface sstp-client find name=CTS-SSTP running=yes]}
:if ([/interface ovpn-client find name=CTS-OVPN]!="") do={
:set usedvpn ovpn
:set stvpn [/interface ovpn-client find name=CTS-OVPN running=yes]}
###没有发现任何符合条件的穿透接口,我来创建一个###
:if (usedvpn="") do={
:if ([/interface pptp-client find connect-to=$ctsip]!="") do={
/interface pptp-client set [find connect-to=$ctsip] name=CTS-PPTP
:set usedvpn pptp}
:if ([/interface l2tp-client find connect-to=$ctsip]!="") do={
/interface l2tp-client set [find connect-to=$ctsip] name=CTS-L2TP
:set usedvpn l2tp}
:if ([/interface sstp-client find connect-to=($ctsip.":22")]!="") do={
/interface sstp-client set [find connect-to=($ctsip.":22")] name=CTS-SSTP
:set usedvpn sstp}
:if ([/interface ovpn-client find connect-to=$ctsip]!="") do={
/interface ovpn-client set [find connect-to=$ctsip] name=CTS-OVPN
:set usedvpn ovpn}}
:if (usedvpn="") do={/interface ovpn-client add cipher=aes128 connect-to=$ctsip port=110 name=CTS-OVPN user=$ctsuser password=$ctspass profile=default-encryption}
###检测CTS当前连接是否正常，不正常则切换VPN协议###
:if ($stvpn="") do={
:if ($usedvpn="pptp") do={
/interface pptp-client remove [find name=CTS-PPTP]
/interface l2tp-client add connect-to=$ctsip disabled=no name=CTS-L2TP user=$ctsuser password=$ctspass profile=default-encryption}
:if ($usedvpn="l2tp") do={
/interface l2tp-client remove [find name=CTS-L2TP]
/interface sstp-client
add connect-to=($ctsip.":22") disabled=no name=CTS-SSTP profile=default-encryption user=$ctsuser password=$ctspass}
:if ($usedvpn="sstp") do={
/interface sstp-client remove [find name=CTS-SSTP]
/interface ovpn-client add cipher=aes128 connect-to=$ctsip port=110 name=CTS-OVPN user=$ctsuser password=$ctspass profile=default-encryption}
:if ($usedvpn="ovpn") do={
/interface ovpn-client remove [find name=CTS-OVPN]
#/interface pptp-client add connect-to=$ctsip name=CTS-PPTP user=$ctsuser password=$ctspass profile=default-encryption disabled=no
/interface l2tp-client add connect-to=$ctsip disabled=no name=CTS-L2TP user=$ctsuser password=$ctspass profile=default-encryption}
} else={
:if ([/ping $ctsgw count=4]=0) do={
:if ($usedvpn="pptp") do={
/interface pptp-client remove [find name=CTS-PPTP]
/interface l2tp-client add connect-to=$ctsip disabled=no name=CTS-L2TP user=$ctsuser password=$ctspass profile=default-encryption}
:if ($usedvpn="l2tp") do={
/interface l2tp-client remove [find name=CTS-L2TP]
/interface sstp-client
add connect-to=($ctsip.":22") disabled=no name=CTS-SSTP profile=default-encryption user=$ctsuser password=$ctspass}
:if ($usedvpn="sstp") do={
/interface sstp-client remove [find name=CTS-SSTP]
/interface ovpn-client add cipher=aes128 connect-to=$ctsip port=110 name=CTS-OVPN user=$ctsuser password=$ctspass profile=default-encryption}
:if ($usedvpn="ovpn") do={
/interface ovpn-client remove [find name=CTS-OVPN]
#/interface pptp-client add connect-to=$ctsip name=CTS-PPTP user=$ctsuser password=$ctspass profile=default-encryption disabled=no
/interface l2tp-client add connect-to=$ctsip disabled=no name=CTS-L2TP user=$ctsuser password=$ctspass profile=default-encryption}
}}

以上为大猫猫原有脚本，我想增加多服务器，比如增加2或3台VPN服务器，自动PING，PING通或延时小的自动连接，每10分钟或30分钟检测一次，如果当前正常则不动，我自己在上面增加了，
{{
:if ([:ping count=4 1.1.1.1<1) do={
:global ctsip 1.1.1.1
:log info "使用1.1.1.1地址"
} else={
:global ctsip 2.2.2.2
:log info "使用2.2.2.地址"
}

增加这个代码以后执行不通过。想问问各位前辈如何更改。

57068368 · 发表于 2019-7-31 12:27:39

那些大神能指点一二啊，谢谢了。

账号		自动登录	找回密码
密码			注册

[脚本] 求助关于大猫猫脚本改进

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。