yoyoyang99
发表于 2005-5-11 16:04:53
大家好，我是cisco的新手，向大家请教一个关于地址变更的问题。我这边的设备是CISCO PIX，版本是PIX Version 6.1(4)本来从ISP那里拿到的地址设置如下：IP:1.1.1.11-15 （例）NM:255.255.255.248GW:1.1.1.16现在要变更为如下配置：IP:2.2.2.11-15 （例）NM:255.255.255.248GW:2.2.2.16我原来的配置（部分）如下：ip address outside 1.1.1.11 255.255.255.248ip address inside 192.168.1.1 255.255.255.0global (outside) 1 1.1.12 netmask 255.255.255.248route outside 0.0.0.0 0.0.0.0 1.1.1.16 1修改后的配置（部分）如下：ip address outside 2.2.2.11 255.255.255.248ip address inside 192.168.1.1 255.255.255.0global (outside) 2.2.2.12 netmask 255.255.255.248route outside 0.0.0.0 0.0.0.0 2.2.2.16 1使用的命令是：no ip address outsideno ip address insideno global (outside)no route outsideip address outside 2.2.2.11 255.255.255.248ip address inside 192.168.1.1 255.255.255.0global (outside) 2.2.2.12 netmask 255.255.255.248route outside 0.0.0.0 0.0.0.0 2.2.2.16 1但执行完了以后对端的GW 2.2.2.16无法ping通，内网的所有的机器都无法出去了，请大家帮忙分析一下！
voodoo3
发表于 2005-6-5 15:31:22
墙上可以ping通吗？nat转换没有做
页:
[1]