3.30远程唤醒谁用过?
好像3.30跟4.X的远程唤醒功能有点不一样./tool/wol inter=内网接口名称
mac:00:11:22:33:44:55 (这方法是4.X以上的)
/tool/wol
mac:00:11:22:33:44:55(这方法是3.X的)
3.x的没得选择内网接口的功能?
回车命令是成功了,但唤醒不了机子!
哪位用过3.30的唤醒功能?
指导一下!!! 官网教程也是这样说的,但3.30的就唤醒不了!
机子支持远程唤醒的!
Manual:Tools/Wake on lan
< Manual:Tools
Applies to RouterOS: v3, v4
This tool is introduced in RouterOS since v3.23 and can send the Wake on LAN MagicPacket to any MAC address of your choosing. If the target device supports WOL, it should wake from sleep. Secure WOL is not supported.
> tool wol mac=FF:FF:FF:FF:FF
The WOL tool will send a UDP MagicPacket to the Broadcast address with the MAC address embedded in it.
By default, the magic packet will be sent as an IP broadcast out the default gateway interface, but if you want, you can tell the command to use a specific interface:
> tool wol interface=ether1 mac=FF:FF:FF:FF:FF:FF 没用过唤醒功能 一样的吧 都加接口 jgnik 发表于 2011-9-27 09:08 static/image/common/back.gif
一样的吧 都加接口
3.3的没得加的!不信可以试试 组件没装齐吧 WGHBOY 发表于 2011-9-28 02:10 static/image/common/back.gif
组件没装齐吧
不太可能是组件包的问题
如果没装的话/tool/wol 这命令都没有了
页:
[1]