ros 5.0正式出来了?
昨天发出的。。。是正式版了了吧！我装在了VM。。。升级原来的那个MV文件。
那个VM。不知是那个高人发出来的。反正可以级。从4.11我一路升级，现在升到5.0还是可以用。。
要朋友的吗。。要的话。我发上来！
What's new in 5.0 (2011-Mar-31 11:33):
*) route - fixed cause of crashes when handling multipath routes;
*) route - fixed limit on maximum active IPv6 route count,
was causing issues with more than 2000 active routes;
*) ipsec - added command kill-connections under remote-peers;
*) ipsec - fix responder side phase2 negotiation problem
which prevented more than one Windows7 host to initiate SA;
*) fixed vrrp - interface was invalid after undoing remove;
*) winbox - added more detailed /interface ethernet stats;
*) winbox - added ability to send e-mail;
*) winbox - added missing 'set-metric' parameter
in 'Routing/Prefix List';
*) wireless - 802.11 dynamic distance fix;
*) fixed problem - packages could not be uninstalled if disk was full;
*) fixed problem - some of the RouterBOARDS did not reboot properly sometimes;
*) fixed problem - VLANs on bridge interface did not work;
*) ssh - client supports public key authentication;
ROS 5.0下载地址 呵呵，好用哦。 不错，我已正式升级，一切正常，呵呵。 回复 wlion 的帖子
我升级是用5.0的ISO安装了一次.
可以软升级吗...
我想知道.因为我将发放到里去里.重启动.没有升级...不知为什么.
包文件是从ISO光盘里提出来的... 你要下那个all_packages-x86-5.0压缩包，解压后，将里面的文件全部ftp上传到routeros，重启即可，祝好！ 从ISO里面提取出来的要把文件的后缀从大写改小写再上传才行。上传以后重启即可 ROS自带的 user manager认证系统能 用吗？ 这次userman能使用了，不错 userman还是不好用 希望算号器早点出来呀............ 今天试装了一下还不错 和以前有不同了 yukwang 发表于 2011-4-2 09:44 static/image/common/back.gif
从ISO里面提取出来的要把文件的后缀从大写改小写再上传才行。上传以后重启即可
原来是大小写的原因呀...哎.!
搞我又去下载了一个ZIP的包...
页:
[1]