ROS4.0beta-5.0beta2的更新内容
What's new in 5.0beta2 (2010-Apr-30 11:35):*) added wireless distance setting, removed ack-timeout;
*) improved 802.11 operation for outdoor distances;
What's new in 5.0beta2 (2010-Apr-29 12:10):
*) fixed sstp on x86;
*) console - removed 'delay' argument from '/system scheduler add' command;
*) console - remove 'comment=""' values from export;
*) console - updated '/system script job':
- also show active login sessions here;
- new read-only property 'type' with values "command", "login"
or "api-login" for running commands and either kind of login sessions;
- new optional read-only property 'parent' with id of the job that
has spawned this one;
*) console - changed "started" property of '/system script job' to use
local time;
*) console - new property 'type' in '/system script job'
*) console - added '/port remote-access export' command;
*) console - fixed bug that caused "cannot set ..." error when using
some properties in 'find' commands;
*) show old software id in export file header;
*) api - can supply password to '/system/upgrade/upgrade-package-source/add';
*) api - 'print' command was not showing values of some properties
such as 'servers' in "/ip/dns";
*) api - fixed api login sessions not dissapearing from '/user active' after
termination;
*) '/user active' now lists type of api connections as 'api';
*) added support for hardware watchdog on RB1000 & RB800;
*) added support for ASIX AX88xxx based USB Ethernet Adapters on RB4xx;
*) fixed problem - ipv6 traffic was not bridged if ipv6 package was not enabled;
*) fixed getting interface stats in dude;
*) fixed metarouter stability problem on RB400s & RB750s;
*) fixed metarouter - it didn't work on RB1000 with 2Gb;
*) fixed metarouter - it locked up on RB800;
*) fixed problem - SFQ queues did not work on interfaces (wireless) if none
of simple or tree queues were added;
*) fixed RB800 temperature;
*) fixed problem - WinBox crashed while opening VAP interface;
*) dhcp server - fixed possible inactive dhcp server in case of many
dhcp leases with address-pool enabled;
*) dhcp server - show non-printable option 82 agent-circuit-id and
agent-remote-id values in hexadecimal notation
(in the same way as client-id is shown);
What's new in 5.0beta1 (2010-Mar-31 09:17):
*) updated drivers and kernel (to linux-2.6.32.5);
*) ssh is now completely rewritten (supports connection forwarding, only DSA keys);
*) added support for SSTP protocol (PPP over TLS);
*) added support for multiple Intel Ethernet cards;
*) added support for IPv6 over PPP
(enabled by default if ipv6 package is installed),
link-local addresses are assigned, and server can issue IPv6 global prefixes
to clients per ppp secret or RADIUS reply (Framed-IPv6-Prefix);
*) added proper support for MPLS over PPP (by default it is now disabled);
*) fixed RB800 temperature;
*) silentboot feature updated;
*) WinBox - any file dropped on WinBox will be uploaded to router;
*) multicast - fixed possible crash during PIM startup;
*) report platform name in "/sysrem resource";
*) fixed problem - vlans were not working on RB750 ether1;
*) fixed mac address handling on RB750, some specific arp requests did not work;
*) more than two dns servers allowed in /ip dns;
*) sniffer and torch could process packet from other interfaces;
*) ospf - fixed DR and BDR election;
*) ospf - changed "/routing ospf route" to show type 2 metric instead of
internal metric for type 2 external routes;
*) added IPv6 support to trafflow (v9 only);
*) rewritten user-manager (formerly known as userman-test);
*) dns cache rotates order of records in reply messages
What's new in 4.10 (2010-May-28 13:59):
*) added support for ethernet switch configuration in WinBox;
*) allow to configure 11n wireless rate tx powers in WinBox;
*) dhcp server - show non-printable option 82 agent-circuit-id and
agent-remote-id values in hexadecimal notation also in winbox;
*) api - fixed '/ip/route/print', was not showing '.id' values;
*) console - fixed printing of OID values;
*) lcd - added support for AX89063
What's new in 4.9:
*) fixed problem - some of the bridge ports stayed invalid after reboot;
*) console - added '/port remote-access export' command;
What's new in 4.8:
*) added support for second serial port on RB800/RB1100;
*) fixed problem - WinBox crashed while opening VAP interface;
*) dhcp server - fixed possible inactive dhcp server in case of many
dhcp leases with address-pool enabled (broken in v4.7);
*) dhcp server - show non-printable option 82 agent-circuit-id and
agent-remote-id values in hexadecimal notation
(in the same way as client-id is shown);
*) api - can supply password to '/system/upgrade/upgrade-package-source/add';
*) console - fixed bug that caused "cannot set ..." error when using
some properties in 'find' commands;
*) api - 'print' command was not showing values of some properties
such as 'servers' in "/ip/dns";
*) show old software id in export file header;
What's new in 4.7:
*) fixed problem - wireless packet bridging with nstreme enabled
sometimes was very slow on RB1xx, RB5xx and RB4xx;
*) fixed problem - ipv6 traffic was not bridged if ipv6 package was not enabled;
*) '/user active' now lists type of api connections as 'api'
*) fixed getting interface stats in dude
*) fixed metarouter stability problem on RB400s & RB750s;
*) fixed metarouter - it didn't work on RB1000 with 2Gb;
*) fixed metarouter - it locked up on RB800;
*) fixed problem - SFQ queues did not work on interfaces (wireless) if none
of simple or tree queues were added;
*) fixed RB800 temperature;
*) silentboot feature updated;
*) multicast - fixed possible crash during PIM startup;
*) ospf - changed "/routing ospf route" to show type 2 metric instead of
internal metric for type 2 external routes;
*) report platform name in "/sysrem resource";
*) fixed problem - vlans were not working on RB750 ether1;
*) fixed mac address handling on RB750, some specific arp requests did not work;
*) more than two dns servers allowed in /ip dns;
*) sniffer and torch could process packet from other interfaces;
*) dns cache rotates order of records in reply messages;
*) ospf - fixed DR and BDR election;
What's new in 4.6:
*) only accept dotted decimal notation for IP addresses. Use of numbers
with leading zero, numbers larger than 255 and non-decimal numbers
is not accepted (but still can ommit third or second and third numbers,
if they are zero);
*) email - user must enable tls explicitly
*) remove limit on number of multicast enabled interfaces, maximum was 32;
*) dhcp server - show last-seen time for leases;
*) dhcp server - do not create busy lease if client declines all IP addresses;
*) fixed - when closing winbox terminal window with active serial-terminal
console command, serial port sometimes was left in acquired state;
What's new in 4.5:
*) ipsec - added blowfish, twofish, and camellia encryption algorithms;
*) fixed static route removing;
*) fixed DHCP client compatibility with some DHCP servers;
*) added static multi-cast route support;
*) fixed temperature monitor on RB800 and RB450G;
*) user manager - payment bug fix - now able to buy
credits without extend price specified;
What's new in 4.4:
*) snmp - fixed snmp version three;
*) snmp - fixed vlan interface speed;
*) hotspot - fixed radius variables in hotspot html pages;
*) removed support for xen;
*) routing - added support for BFD protocol;
*) fixed problem - MetaROUTER sometimes froze on RB4xx;
*) fixed OSPFv3 on bridge interfaces;
What's new in 4.3:
*) kvm - vnc support, booting from cdrom image
*) API - fixed possible crash when running concurrent commands;
*) console - fixed logging commands: 'warning', 'error' and 'debug' were
all using 'info' topic;
*) bgp - added routing-table configuration option for instances;
*) bgp - added 'as-override' and 'passive' configuration options for peers;
*) bgp - added support for Site of Origin extended communities;
*) bgp - fixed some network issues;
*) ospf - fixed problem: when last neighbor on multi-access interface disappeared,
incorrect RouterLSA was generated on designated router;
*) metarouter - allow to specify metarouter's memory size when importing image;
*) firewall - added 'routing-table' matcher;
*) fixed problem - e1000 driver did not work in virtual machines;
What's new in 4.2:
*) fixed problem - RB450G ethernet did not work if one of the ports was disabled;
*) fixed ethernet of RB433 with switch chip IP175D;
*) fixed route attribute problem;
*) fixed route next-hops falling under multiple connected routes;
What's new in 4.1:
*) fixed problem - RB750 (clocked at 300MHz) Ethernet did not work;
*) fixed problem - routes on some interfaces (like VLAN) were not activated;
*) ppp, gps, sms, serial terminal - allow use of different channels
on same port across multiple programs simultaneous
*) dhcp server - added support for dynamic address-list entries;
*) hotspot - added support for dynamic address-list entries;
*) hotspot - fixed redirect after login in case if client gets new IP address
(problem introduced in 3.28);
What's new in 4.0:
*) IT87XX hardware monitoring sensor support;
*) kvm allows to choose emulated nic model;
*) hotspot - fixed redirect after login in case if client gets new IP address
(problem introduced in 3.28);
*) hotspot - fixed redirect after login in case if client gets new IP address;
*) console - commands like 'monitor', 'torch' and others that periodically
refresh information sometimes failed to work when started from
the scheduler;
*) console - scheduled scripts no longer require 'test' policy to run;
*) console - fix issues with scripts that contain lines with trailing spaces;
*) console - add back compatibility with old scripts that use space instead
of '=' to separate argument name and value;
*) console - following fixes:
- accept item numbers when prompted by command to specify item;
- argument names without '=' were matched even when expecting unnamed
value; this broke code such as:
:foreach i in=1,2,3 do {}
here 'i' was matched as argument name "in";
- 'tab' key did not automatically append '=' after complete argument
names;
What's new in 4.0rc1:
*) console - removed support for Lua (will be reintroduced later);
*) incorporated all the bug fixes since v3.30;
*) port remote-access - added 'log-file' property. If value is a non-empty
string, then all data that is read from the port is appended to a file
with that name, regardless of the active remote connection;
*) console - removed '/user' from the output of top level '/export' command,
still can be exported by '/user export';
What's new in 4.0beta4:
*) routing - changed BGP network and default-originate behavior;
*) web proxy - allow to edit error page;
*) console - terminal window size change now does not trigger full terminal
reset;
*) mesh protocol - improved loop prevention (becomes incompatible with earlier versions);
*) incorporated all the bug fixes since v3.27;
What's new in 4.0beta3:
*) added support for 802.11n atheros based wireless cards;
*) added ability to run other OSs in MetaROUTERs;
*) console: Lua scripting language. http://wiki.mikrotik.com/wiki/Lua
*) console: added nstreme-dual OIDs;
*) incorporated all the bug fixes since v3.23;
What's new in 4.0beta2:
*) console: added 'without-paging' argument to 'monitor' commands;
*) console: now 'without-paging' and 'interval' arguments in of 'print'
commands work together. Printing can be stopped by pressing 'q' or
ctrl-c, any other key triggers printing;
*) incorporated all the bug fixes since v3.22;
*) fixed TFTP server logging;
*) fixed problem - "/system upgrade" did not show proper package
architecture and was unable to fetch new packages;
What's new in 4.0beta1:
*) added support for MetaROUTERs;
*) all test packages are regular ones;
*) console - can mix named and unnamed arguments, can use names for unnamed
argument values. For example all of the following commands are
accepted now:
/ping 10.11.12.13 count=4
/ping address=10.11.12.13 count=4
/ping count=4 10.11.12.13 一点用处都没有，对于使用3.30的普遍民众来说
页:
[1]