ros 3.3 creak and key file
Mikrotik V3.30 License 4.-----------------------
** Follow these steps **
1. Burn both ISO files (Mikrotik 3.20 & 3.30) to CDs.
2. Install Mikrotik 3.20, you can choose all packages BUT mpls-test, routing-test and xen. Those 3 need to be UNCHECKED at the installation screen.
3. After installation, connect using winbox and drag & drop the keygen.npk into winbox "Files" menu.
4. Reboot the OS. using System > Reboot.
5. Now make sure that the keygen package is installed properly by checking System > Packages, make sure it's listed.
6. Assign an IP address to the interface you're connecting to (IP > Addresses), and also to your own PC. Both IPs should be in the same subnet of course.
7. CMD to the "Key" folder and initiate the following command:ssh.exe <ip address>, where "ip address" is the IP address you assigned to the Mikrotik OS. interface.
8. Under the \w> prompt type:roskey /dev/hda 7PEZ-EYN
9. The cracking process duration greatly varies as it very much depends on the hardware capabilities, mainly the CPU. Anyway, wait till you get the message:ID is:7PEZ-EYN Work fine!!!
10. Reboot the OS.
11. Install Mikrotik 3.30, and make sure that the 3 above mentioned packages are UNCHECKED.
12. Connect to winbox and goto System > License > Import key, and choose 7PEZ-EYN.key in the "Key" folder.
13. Congratulations! Now you have a fully working Mikrotik OS. V3.30 with License 4.
源文件由下面作者提供
Enjoy!
Stilliam. 有没用过的，说一下。 一样的东西，需要的可以GOOGLE一下，不用钱。
我试了在VM下不成功。实体机不知道。 正在测试当中，应该没问题。以前看了很多帖子，但苦于找不到真正的key文件一直没测试。现在终于找到key。发出来大家看看 已经没必要了。 有破解的程序么 谢谢 可以成功. 謝謝, 正是需要 到处都是，现在还拿来卖钱。3.30 L6的偶都有，呵呵。 能共享一下不？ 那吧你的L6的key分享一下把，我的L4key虚拟机测试没有问题，我发布一是为了赚几个铜板。二是给大家分享一下。方便大家寻找 安装3.20版后，使用算号---- 算号完成， software id 变为 7PEZ-EYN 下一步安装 3.30
请问一下，使用光盘安装3.30 的时候，不是把3.20的文件、分区都清掉了吗？ software id 就不是7PEZ-EYN 了。
应该如何安装 3.30 ？ 这个不错 200用户 这个不错 200用户
页:
[1]
2