[求助]同isp 双adsl设置不成功
我是这么设置的/ip address add address=192.168.0.254/255.255.255.0 interface=ether1 comment=lan
/ip dns set primary-dns=202.96.134.133 secondary-dns=202.96.128.68 allow-remote-requests=yes
/ip firewall mangle add chain=forward protocol=tcp tcp-flags=syn action=change-mss new-mss=1440
/interface pppoe-client add name="pppoe-out1" interface=ether2 user="1001" password="1001" add-default-route=no disabled=no
/interface pppoe-client enable pppoe-out1
/ip address add address=58.58.58.1/32 interface=pppoe-out1 comment="1"
/ip route add gateway=58.58.58.1 routing-mark=1 comment="1"
/ip firewall mangle add chain=prerouting in-interface=ether1 connection-state=new nth=1,1,0 action=mark-connection new-connection-mark=1 passthrough=yes disabled=no
/ip firewall mangle add chain=prerouting in-interface=ether1 connection-mark=1 action=mark-routing new-routing-mark=1 passthrough=no disabled=no
/ip firewall nat add chain=srcnat connection-mark=1 action=src-nat to-addresses=58.58.58.1 to-ports=0-65535 comment="1" disabled=no
/interface pppoe-client add name="pppoe-out2" interface=ether2 user="1002" password="1002" add-default-route=no disabled=no
/interface pppoe-client enable pppoe-out2
/ip address add address=58.58.58.2/32 interface=pppoe-out2 comment="2"
/ip route add gateway=58.58.58.2 routing-mark=2 comment="2"
/ip firewall mangle add chain=prerouting in-interface=ether1 connection-state=new nth=1,1,1 action=mark-connection new-connection-mark=2 passthrough=yes disabled=no
/ip firewall mangle add chain=prerouting in-interface=ether1 connection-mark=2 action=mark-routing new-routing-mark=2 passthrough=no disabled=no
/ip firewall nat add chain=srcnat connection-mark=2 action=src-nat to-addresses=58.58.58.2 to-ports=0-65535 comment="2" disabled=no
然后每隔30秒运行这个脚本
:local assign-address
:local new-address
:local status
:local x
:set x 2
:for i from=1 to=$x do={
:set status running]
:if ($status=true) do={
:set new-address address]
:set new-address [:pick $new-address 0 ([:len $new-address] -3)]
:set assign-address address]
:set assign-address [:pick $assign-address 0 ([:len $assign-address] -3)]
:if ($assign-address != $new-address) do={ /ip address set address=$new-address network=$new-address broadcast=$new-address
/ip route set gateway=$new-address
/ip fir nat set to-addresses=$new-address
/ip route set gateway=$new-address
}
}
}
设置完成后,显示两个adsl已经拨号成功,客户机可以ping通routeros确无法访问外网,请高手帮忙看看是那个地方弄错了.
另外想咨询在routeros 4.0bata1中/ip firewall nat add chain=srcnat connection-mark=1 action=src-nat to-addresses=58.58.58.1 to-ports=0-65535 comment="1" disabled=no
为什么不能加上这个参数 高手帮忙看看呀 好像你没有做IP伪装 现在用4.0设置多线很方便，关键是nth参数要理解好，ros3.0的中文说明书上写的很清楚！！我今天设置得5线同网关adsl已经不掉线也不丢包了,而且很均衡 routeros2.97已经弄成功,现在在4.0中没有成功,不知道是那个地方弄错了
页:
[1]