cf3331
发表于 2004-10-7 04:05:05
eth0 Link encap:EthernetHWaddr 4C:00:10:AC:23:EE inet addr:192.168.0.1Bcast:192.168.0.255Mask:255.255.255.0 UP BROADCAST RUNNING MULTICASTMTU:1500Metric:1 RX packets:5347775 errors:61 dropped:12 overruns:61 frame:0 TX packets:4415432 errors:0 dropped:0 overruns:12 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1532839329 (1.4 GiB)TX bytes:1986223368 (1.8 GiB) Interrupt:10 Base address:0xe000eth1 Link encap:EthernetHWaddr 4C:00:10:AC:23:92 inet addr:210.87.138.250Bcast:210.87.138.251Mask:255.255.255.252 UP BROADCAST RUNNING MULTICASTMTU:1500Metric:1 RX packets:3534678 errors:0 dropped:0 overruns:0 frame:0 TX packets:3870990 errors:0 dropped:0 overruns:10 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1144074619 (1.0 GiB)TX bytes:646335491 (616.3 MiB) Interrupt:12lo Link encap:Local Loopback inet addr:127.0.0.1Mask:255.0.0.0 UP LOOPBACK RUNNINGMTU:16436Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 TX bytes:0 (0.0 eth0是内网eth1是外网RX packets:5347775 errors:61 dropped:12 overruns:61 frame:0看看我的内网丢包数正不正常!!
cf3331
发表于 2004-10-7 04:06:05
total used free shared buffers Mem: 62756 6032 56724 0 0 Swap: 0 0 0 Total: 62756 6032 56724 SWAP怎么没有呢?正常吗?
DreamCat
发表于 2004-10-7 11:07:40
CL默认是为软盘制作的。没有使用交换分区。你应该知道交换分区的作用吧？
DreamCat
发表于 2004-10-7 11:15:54
网卡出现收发错误一般都是网卡问题，换一个。
cf3331
发表于 2004-10-7 14:56:34
知道交换分区的作用!!我哪个出现少量的丢包正不正常啊!--------61个!难道说一个都不能出现才算正常吗????要达到这样的效果要用什么级别的卡?
DreamCat
发表于 2004-10-7 15:46:08
知道交换分区的作用你还问？CL需要交换分区么？少量的报文丢失是正常的。
cf3331
发表于 2004-10-7 18:41:15
晕!也是!!!!我哪个丢算是少量吗?
页:
[1]