ym1107 发表于 2011-9-14 22:18:25

终于明白了，下面是官方的说明，分享出来：
[隧道代理]
I've tried to create a tunnel but did not succeed. Is there a basic guideline on how to set up a tunnel?

How to create a 6in4 tunnel (also known as a configured tunnel):

1. Visit our tunnelbroker.net site and log in.
2. Once you log into the site, click "Create Regular Tunnel" and provide your IPv4 endpoint address and choose a preferable tunnel server location. (Note: Your IPv4 endpoint address should be displayed on the tunnel creation page)
3. After you successfully create a tunnel, visit your account's detail page and choose your OS type to get example configuration commands.
4. Use the commands to configure your machine. Please remember, you must have 'administrator' privilege to configure your machine.
5. Once you configure your machine, please browse sites like http://ipv6.google.com or http://kame.net to test your IPv6 connectivity.

*Two important notes:
1. Your IPv4 endpoint address must be reachable via ICMP (Internet Control Message Protocol).
2. If you are using a NAT (Network Address Translation) appliance, please make sure it allows and forwards protocol 41.
What is Protocol 41?
Protocol 41 is one of the Internet Protocol numbers. Within the IPv4 header, the IPv4 Protocol field is set to 41 to indicate an encapsulated IPv6 packet.
**Useful references:
1. Video Tutorials: http://ipv6.he.net/presentations.php
2. Tunnel Broker Forums: http://tunnelbroker.net/forums/

ym1107 发表于 2011-9-15 14:16:42

关键点在于使用NAT后，你的路由必须能使41号协议能forward。需要检查你的防火墙规则
----------------------------------------------
2. If you are using a NAT (Network Address Translation) appliance, please make sure it allows and forwards protocol 41.

wang84525 发表于 2011-9-16 11:18:05

找了很长时间了，不错，谢谢斑竹

ym1107 发表于 2011-9-16 21:44:59

试验了几次，发现ROS在用做代理的情况下（包括透明代理）按照上面的配置内网访问IPV6没有问题，如果使用NAT的，则内网很难访问IPV6。

fangming202 发表于 2011-10-5 11:23:20

学习中啊:@

sunloody 发表于 2011-10-17 10:14:39

ipv6好像还是很遥远啊！~~

zhoudongke 发表于 2011-10-22 15:07:41

哎哟，谢谢楼主啊。正准备弄呢。学习中啊

半打机车 发表于 2011-11-26 19:41:08

低版本的原来不支持啊

zhanhm 发表于 2011-12-9 21:35:02

什么开的去看看？:L

lovepcdiy 发表于 2011-12-24 15:27:42

学习了.顶一下

曾记电脑 发表于 2012-2-1 07:57:33

试验下   别太落伍了

sffqqq 发表于 2012-2-19 22:07:48

我还没有有呢.....................

gupanli 发表于 2012-3-31 21:02:45

按照楼主的方法去做了，根据www.tunnelbroker.net上面自动生成的命令，在winbox里面可以ping格式为IPV6的地址。但是在做楼主说的最后一步“add address=2001:470:1f07:69c::/64 advertise=yes disabled=no eui-64=no interface=lan”后，局域网里面的电脑并没有获得ipv6的地址，请问是我哪里做的不对了吗？望指教，为盼，谢谢！
页: 1 2 3 4 5 [6]
查看完整版本: 在routeros中设置ipv6隧道联接到ipv6网络