cloudq
发表于 2004-7-14 08:54:09
ata2 at port 0x170-0x177,0x376 irq 15 on isa0atkbdc0:at port 0x60,0x64 on isa0atkbd0:flags 0x1 irq 1 on atkbdc0psm0:irq 12 on atkbdc0psm0: model 4D+ Mouse, device ID 8vga0:at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0sc0:at flags 0x100 on isa0sc0: VGA sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0sio0: type 16550A, consolesio1 at port 0x2f8-0x2ff irq 3 on isa0sio1: type 16550Afxp0: Ethernet address 00:08:c7:43:3c:03fxp1: Ethernet address 08:00:09:dc:16:06DEVFS: ready to runad0: 1549MB at ata0-master using WDMA2Mounting root from cd9660:/dev/md0cDisabling watchdog=================== Bootstrap installer starting ===================Initialized the environmentRouting engine model is OliveSourcing /sbin/OliveDiscovered that flash disk =, hard disk = ad0Disk to install is wd0 Setting ospackage=jboot-6.0R1.3, configpackage=configs-6.0R1.3.tgzSetting packlist=jbundle-6.0R1.3-export.tgzSetting isupgrade=jboot-6.0R1.3Packages and configurations copied to /tmpCleaning up wd0...WARNING: Not 6.X style partitioning, need to repartition diskPartitioning wd0...10+0 records in10+0 records out5120 bytes transferred in 0.005399 secs (948326 bytes/sec)******* Working on device /dev/wd0 *******fdisk: invalid fdisk partition table foundfdisk: WARNING: adjusting start offset of partition 1 from 1 to 63, to fall on a head boundaryfdisk: WARNING: adjusting size of partition 1 from 3173184 to 3173121 to end on a cylinder boundaryCould not read disklabel for wd0Installing disk label on wd0Running newfs on wd0s1a...Warning: 3612 sector(s) in last cylinder unallocated/dev/wd0s1a: 225764 sectors in 56 cylinders of 1 tracks, 4096 sectors 110.2MB in 4 cyl groups (16 c/g, 32.00MB/g, 6912 i/g)super-block backups (for fsck -b #) at: 32, 65568, 131104, 196640Running newfs on wd0s1e...Warning: 3588 sector(s) in last cylinder unallocated/dev/wd0s1e: 25084 sectors in 7 cylinders of 1 tracks, 4096 sectors 12.2MB in 1 cyl groups (16 c/g, 32.00MB/g, 3136 i/g)super-block backups (for fsck -b #) at: 32Running newfs on wd0s1f...Warning: 928 sector(s) in last cylinder unallocated/dev/wd0s1f: 2128992 sectors in 520 cylinders of 1 tracks, 4096 sectors 1039.5MB in 33 cyl groups (16 c/g, 32.00MB/g, 7872 i/g)super-block backups (for fsck -b #) at: 32, 65568, 131104, 196640, 262176, 327712, 393248, 458784, 524320, 589856, 655392, 720928, 786464, 852000, 917536, 983072, 1048608, 1114144, 1179680, 1245216, 1310752, 1376288, 1441824, 1507360, 1572896, 1638432, 1703968, 1769504, 1835040, 1900576, 1966112, 2031648, 2097184Installing JUNOS on wd0...Making root filesystem...Adding jbase...Mounted jbase on /mnt/packages/mnt/jbase (/dev/vn0)Adding jbundle-6.0R1.3-export.tgz...Requested space: 156160056 bytes, free space: 932549632 bytes in /var/tmp/instmp.gc3XOBRunning requirements file first for jbundle-6.0R1.3-export..Running pre-install for jbundle-6.0R1.3-export..extract: Package name is jbundle-6.0R1.3-exportextract: CWD to .Running post-install for jbundle-6.0R1.3-export..Verified MD5 checksum of jbase-6.0R1.3.tgzVerified MD5 checksum of jboot-6.0R1.3Verified MD5 checksum of jdocs-6.0R1.3.tgzVerified MD5 checksum of jkernel-6.0R1.3.tgzVerified MD5 checksum of jpfe-6.0R1.3.tgzVerified MD5 checksum of jroute-6.0R1.3.tgzAdding jkernel...Adding jpfe...Adding jdocs...Adding jroute...Restoring backed up configurations...Unmounted /mnt/packages/mnt/jbase24: TerminatedWaiting (max 60 seconds) for system process `bufdaemon' to stop...stoppedWaiting (max 60 seconds) for system process `syncer' to stop...stoppedsyncing disks... doneUptime: 2m10sata0: Spinning down devices. Please wait...Rebooting...Console: serial portBIOS drive C: is disk0BIOS 639kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(builder@cecrops.juniper.net, Thu Jul 24 02:09:25 GMT 2003)|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/kernel text=0x33b247 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x273d8+0x49c88 \|/-\|/-\|/-\|/-\|/-\syms= Loader Quick Help ----------------- The boot order is PCMCIA or floppy -> Flash -> Disk -> Lan -> back to PCMCIA or floppy. Typing reboot from the command prompt will cycle through the boot devices. On some models, you can set the next boot device using the nextboot command: nextboot compact-flash | diskFor more information, use the help command: help Hit to boot immediately, or space bar for command prompt.Booting in 9 seconds... Booting in 8 seconds... Booting in 7 seconds... Booting in 6 seconds... Booting in 5 seconds... Booting in 4 seconds... Booting in 3 seconds... Booting in 2 seconds... Booting in 1 second... Booting ... /-\|/-\|Copyright ?1996-2001, Juniper Networks, Inc.All rights reserved.Copyright ?1992-2001 The FreeBSD Project.Copyright ?1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved.JUNOS 6.0R1.3 #0: 2003-07-24 02:20:37 UTC builder@cecrops.juniper.net:/build/cecrops-d/6.0R1.3/obj-i386/sys/compile/JUNIPERTimecounter "i8254"frequency 1193182 HzTimecounter "TSC"frequency 331706565 HzCPU: Pentium II/Pentium II Xeon/Celeron (331.71-MHz 686-class CPU)Origin = "GenuineIntel"Id = 0x660Stepping = 0Features=0x183f9ffreal memory= 268435456 (262144K bytes)sio0: gdb debugging portavail memory = 255840256 (249844K bytes)Olive CPUPreloaded elf kernel "kernel" at 0xc0531000.DEVFS: ready for devicesPentium Pro MTRR support enabledmd0: Malloc disknpx0:on motherboardnpx0: INT 16 interfacepcib0:on motherboardpci0:on pcib0pcib1:at device 1.0 on pci0pci1:on pcib1pci1:at 0.0 irq 11fxp0:port 0x2000-0x201f mem 0x40100000-0x401fffff,0x40300000-0x40300fff irq 11 at device 10.0 on pci0fxp1:port 0x2020-0x203f mem 0x40200000-0x402fffff,0x40400000-0x40400fff irq 11 at device 14.0 on pci0isab0:at device 20.0 on pci0isa0:on isab0atapci0:port 0x2060-0x206f at device 20.1 on pci0ata0: at 0x1f0 irq 14 on atapci0pci0:at 20.2 irq 11smb0:port 0xfc00-0xfc0f at device 20.3 on pci0fdc0:at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0ata2 at port 0x170-0x177,0x376 irq 15 on isa0atkbdc0:at port 0x60,0x64 on isa0atkbd0:flags 0x1 irq 1 on atkbdc0device_probe_and_attach: atkbd0 attach returned 6psm0:irq 12 on atkbdc0psm0: model 4D+ Mouse, device ID 8vga0:at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0sc0:at flags 0x100 on isa0sc0: VGA sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0sio0: type 16550A, consolesio1: configured irq 5 not in bitmap of probed irqs 0sio2 at port 0x2f8-0x2ff irq 3 on isa0sio2: type 16550Asio3: configured irq 7 not in bitmap of probed irqs 0fxp0: Ethernet address 00:08:c7:43:3c:03fxp1: Ethernet address 08:00:09:dc:16:06DEVFS: ready to runad0: 1549MB at ata0-master using WDMA2Mounting root from ufs:/dev/ad0s1aMounted jbase package on /dev/vn0...Mounted jkernel package on /dev/vn1...Mounted jpfe package on /dev/vn2...Mounted jdocs package on /dev/vn3...Mounted jroute package on /dev/vn4...swapon: adding /dev/ad0s1b as swap deviceAutomatic reboot in progress.../dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1a: clean, 82937 free /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1e: clean, 12116 free (49 frags, 10361 blocks, 0.0% fragmentation)(20 frags, 1512 blocks, 0.2% fragmentation)(49 frags, 10361 blocks, 0.0% fragmentation)/dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1f: clean, 955046 free (158 frags, 119361 blocks, 0.0% fragmentation)tunefs: soft updates setmgd: error: Cannot stat configuration file: /config/juniper.confWarning: Commit failed, activating partial configuration.Warning: Edit the router configuration to fix these errors.cp: /var/db/juniper.db: No such file or directorySetting initial options:debugger_on_panic=NO debugger_on_break=NO.Doing initial network setup: hostname.Initial interface configuration:additional daemons: syslogd.Additional routing options:.Doing additional network setup:.Starting final network daemons:.setting ldconfig path: /usr/libstarting standard daemons: cron.Initial rc.i386 initialization:.rc.i386 configuring syscons:.Local package initialization:.starting local daemons:.Wed Aug 11 21:56:26 GMT 2004 Aug 11 21:56:26 Amnesiac (ttyd0)login: Aug 11 21:56:32 nasd: NASD_CONFIG_GET_LAST_MODIFIED_FAILED: Unable to determine last modified time of JUNOSconfiguration database: Could not stat configuration database: No such file or directory Aug 11 21:56:32 alarmd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:32 alarmd: can't open ddl 'Could not open configuration database'Aug 11 21:56:32 dfwd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:33 nasd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:33 nasd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Aug 11 21:56:33 dfwd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:33 rmopd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:33 snmpd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:34 snmpd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database Could not open configuration database Aug 11 21:56:34 snmpd: SNMPD_CONFIG_ERROR: Configuration database has errorsAug 11 21:56:34 pfed: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:34 rmopd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database Could not open configuration database Aug 11 21:56:34 spd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:34 spd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Aug 11 21:56:34 snmpd: SNMPD_TRAP_COLD_START: trap_generate_cold: SNMP trap: cold start Aug 11 21:56:34 dcd: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryAug 11 21:56:34 dcd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:34 dcd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Aug 11 21:56:36 chassisd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:36 spd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:36 spd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database: Could not open configuration database Aug 11 21:56:37 chassisd: CHASD_DDL_ACCESS_ERROR: can't open ddl Could not open configuration database Aug 11 21:56:37 chassisd: CHASSISD_CONFIG_INIT_ERROR: Problems with configuration file '/var/etc/chassisd.conf'; using defaults Aug 11 21:56:37 lmpd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:38 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:38 cosd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:38 lmpd: LMPD_PARSE_ERROR: Configuration database open failure: Could not open configuration databaseAug 11 21:56:38 /usr/sbin/sampled: Opening configuration database Could not open configuration database Aug 11 21:56:38 fsad: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:38 cosd: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Aug 11 21:56:38 dfwd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:38 fsad: FSAD_CONFIG_ERROR: Reason: 'Opening configuration database' Could not open configuration databaseAug 11 21:56:38 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:38 /usr/sbin/sampled: Opening configuration database Could not open configuration database Aug 11 21:56:38 mib2d: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:39 mib2d: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Opening configuration database Could not open configuration database Aug 11 21:56:39 mib2d: MIB2D_CONFIG_CHECK_FAILED: main: configuration database has errorsAug 11 21:56:39 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:39 /usr/sbin/sampled: Opening configuration database Could not open configuration database Aug 11 21:56:40 rpd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Configuration database open failure: Could not open configuration database Aug 11 21:56:42 dcd: DCD_STAT_ERROR: stat() failed on /vAmnesiac (ttyd0)login: Aug 11 21:56:42 dcd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:42 Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Aug 11 21:56:43 lmpd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAmnesiac (ttyd0)login: Amnesiac (ttyd0)login: Aug 11 21:56:43 dfwd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:43 cosd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:44 cosd: COSD_DDL_FAILED: ddl open failed: error: Could not open configuration database, errno: No such file or directory Aug 11 21:56:44 dfwd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:44 dfwd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:44 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:44 /usr/sbin/sampled: Opening configuration database Could not open configuration database Aug 11 21:56:44 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:44 /usr/sbin/sampled: Opening configuration database Could not open configuration database Aug 11 21:56:44 /usr/sbin/sampled: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:44 /usr/sbin/sampled: Opening configuration database Could not open configuration database Aug 11 21:56:46 rpd: UI_CONFIGURATION_ERROR: Process: , path: , statement: , Configuration database open failure: Could not open configuration database Aug 11 21:56:47 init: ntp is thrashing, not restartedAug 11 21:56:47 dcd: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryAmnesiac (ttyd0)login: Aug 11 21:56:47 dcd: UI_DBASE_OPEN_FAILED: Database open failed for file '/var/db/juniper.data': No such file or directoryAug 11 21:56:47 dcd: UI_CONFIGURATION_ERROR: Process: , path:configure Entering configuration modeThe configuration has been changed but not committedroot# commit commit completeroot# ls ^unknown command.root# show interfaces brief ^invalid interface type in 'brief' at 'brief'root# e set om ^syntax error.root# set om interfaces fx0 p0 ?Possible completions:accounting-profile Accounting profile name+ apply-groups Groups from which to inherit configuration datadescription Text description of interfacedisable Disable this interfacegratuitous-arp-replyEnable gratuitous ARP reply> hold-time Hold time for link up and link downlink-mode Link operational modemac Hardware MAC addressno-gratuitous-arp-replyDon't enable gratuitous ARP replyno-gratuitous-arp-requestIgnore gratuitous ARP requestno-traps Don't enable SNMP notifications on state changesspeed Link speed> traceoptions Interface trace optionstraps Enable SNMP notifications on state changes> unit Logical interfacevlan-tagging 802.1Q VLAN tagging supportroot# set interfaces fxp0 a unit 0 add ^syntax error.root# set interfaces fxp0 unit 0 add r ^syntax error.root# set interfaces fxp0 unit 0 addr ?Possible completions: Execute this commandaccounting-profile Accounting profile name+ apply-groups Groups from which to inherit configuration databandwidth Logical unit bandwidth (informational only)description Text description of the interfacedisable Disable this logical interfaceencapsulation Logical link-layer encapsulation> family Protocol familyno-traps Don't enable SNMP notifications on state changespassive-monitor-modeUse interface to tap packets from another routertraps Enable SNMP notifications on state changesvlan-id Virtual LAN identifier value for 802.1Q VLAN tags| Pipe through a commandroot# set interfaces fxp0 unit 0 fm ^syntax error.root# set interfaces fxp0 unit 0 fm f ^syntax error.root# set interfaces fxp0 f unit 0 family i ^'i' is ambiguous.Possible completions:> inet IPv4 parameters> inet6 IPv6 protocol parameters> iso OSI ISO protocol parametersroot# set interfaces fxp0 unit 0 family i netroot# set interfaces fxp0 unit 0 family inet ?Possible completions:> inet IPv4 parameters> inet6 IPv6 protocol parametersroot# set interfaces fxp0 unit 0 family inet ?Possible completions: Execute this command> address Interface address/destination prefix+ apply-groups Groups from which to inherit configuration data> filter Packet filteringno-redirects Do not redirect traffic> policer Interface policingprimary Candidate for primary interface in system| Pipe through a commandroot# set interfaces fxp0 unit 0 family inet a ^'a' is ambiguous.Possible completions:> address Interface address/destination prefix+ apply-groups Groups from which to inherit configuration dataroot# set interfaces fxp0 unit 0 family inet a ddress ?Possible completions: Interface address/destination prefixroot# set interfaces fxp0 unit 0 family inet address 10.37.144.218/21 ?Possible completions: Execute this command+ apply-groups Groups from which to inherit configuration data> arp Static ARP entriesbroadcast Broadcast addresspreferred Preferred address on interfaceprimary Candidate for primary address in system> vrrp-group VRRP group| Pipe through a commandroot# set interfaces fxp0 unit 0 family inet address 10.37.144.218/21 ' ^syntax error.root# root# set interfaces fxp0 unit 0 family inet address 10.37.144.218/21 ' root# commit Aug 11 21:58:52 dcd: DCD_STAT_ERROR: stat() failed on /var/db/dcd.snmp_ix No such file or directoryAug 11 21:58:54 cosd: COSD_CONF_OPEN_FAILURE: Unable to open: /var/etc/cosd.conf, using default CoS forwarding classes, do 'commit full' in cli to avoid this messagefxp0: Multicast addr command failedfxp1: Multicast addr command failedAug 11 21:59:22 dcd: COSD_CONF_OPEN_FAILURE: Unable to open: /var/etc/cosd.conf, using default CoS forwarding classes, do 'commit full' in cli to avoid this messagecommit completeroot# root# root# root# root# exit Exiting configuration moderoot> exit root@% ls.cshrc .login .profileroot@% s (no) yes *** FINAL System shutdown message from root@ *** System going down IMMEDIATELY shutdown: Shutdown NOW!root> Aug 11 22:01:12 rpd: RPD_SNMP_SARECV: snmp_epi_recv: error from sam_recv: 0 Waiting (max 60 seconds) for system process `bufdaemon' to stop...stoppedWaiting (max 60 seconds) for system process `syncer' to stop...stoppedsyncing disks... 3 2 doneUptime: 5m26sata0: resetting devices .. doneata0: Spinning down devices. Please wait...Rebooting...Console: serial portBIOS drive C: is disk0BIOS 639kB/261120kB available memoryFreeBSD/i386 bootstrap loader, Revision 0.8(builder@cecrops.juniper.net, Thu Jul 24 02:09:25 GMT 2003)|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/kernel text=0x33b247 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x273d8+0x49c88 \|/-\|/-\|/-\|/-\|/-\syms= Loader Quick Help ----------------- The boot order is PCMCIA or floppy -> Flash -> Disk -> Lan -> back to PCMCIA or floppy. Typing reboot from the command prompt will cycle through the boot devices. On some models, you can set the next boot device using the nextboot command: nextboot compact-flash | diskFor more information, use the help command: help Hit to boot immediately, or space bar for command prompt.Booting in 9 seconds... Booting in 8 seconds... Booting in 7 seconds... Booting in 6 seconds... Booting ... /-\|/-\|Copyright ?1996-2001, Juniper Networks, Inc.All rights reserved.Copyright ?1992-2001 The FreeBSD Project.Copyright ?1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved.JUNOS 6.0R1.3 #0: 2003-07-24 02:20:37 UTC builder@cecrops.juniper.net:/build/cecrops-d/6.0R1.3/obj-i386/sys/compile/JUNIPERTimecounter "i8254"frequency 1193182 HzTimecounter "TSC"frequency 331706844 HzCPU: Pentium II/Pentium II Xeon/Celeron (331.71-MHz 686-class CPU)Origin = "GenuineIntel"Id = 0x660Stepping = 0Features=0x183f9ffreal memory= 268435456 (262144K bytes)sio0: gdb debugging portavail memory = 255840256 (249844K bytes)Olive CPUPreloaded elf kernel "kernel" at 0xc0531000.DEVFS: ready for devicesPentium Pro MTRR support enabledmd0: Malloc disknpx0:on motherboardnpx0: INT 16 interfacepcib0:on motherboardpci0:on pcib0pcib1:at device 1.0 on pci0pci1:on pcib1pci1:at 0.0 irq 11fxp0:port 0x2000-0x201f mem 0x40100000-0x401fffff,0x40300000-0x40300fff irq 11 at device 10.0 on pci0fxp1:port 0x2020-0x203f mem 0x40200000-0x402fffff,0x40400000-0x40400fff irq 11 at device 14.0 on pci0isab0:at device 20.0 on pci0isa0:on isab0atapci0:port 0x2060-0x206f at device 20.1 on pci0ata0: at 0x1f0 irq 14 on atapci0pci0:at 20.2 irq 11smb0:port 0xfc00-0xfc0f at device 20.3 on pci0fdc0:at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0ata2 at port 0x170-0x177,0x376 irq 15 on isa0atkbdc0:at port 0x60,0x64 on isa0atkbd0:flags 0x1 irq 1 on atkbdc0psm0:irq 12 on atkbdc0psm0: model 4D+ Mouse, device ID 8vga0:at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0sc0:at flags 0x100 on isa0sc0: VGA sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0sio0: type 16550A, consolesio1: configured irq 5 not in bitmap of probed irqs 0sio2 at port 0x2f8-0x2ff irq 3 on isa0sio2: type 16550Asio3: configured irq 7 not in bitmap of probed irqs 0fxp0: Ethernet address 00:08:c7:43:3c:03fxp1: Ethernet address 08:00:09:dc:16:06DEVFS: ready to runad0: 1549MB at ata0-master using WDMA2Mounting root from ufs:/dev/ad0s1aMounted jbase package on /dev/vn0...Mounted jkernel package on /dev/vn1...Mounted jpfe package on /dev/vn2...Mounted jdocs package on /dev/vn3...Mounted jroute package on /dev/vn4...swapon: adding /dev/ad0s1b as swap deviceAutomatic reboot in progress.../dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1a: clean, 82933 free /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1e: clean, 12114 free (53 frags, 10360 blocks, 0.0% fragmentation)(18 frags, 1512 blocks, 0.1% fragmentation)(53 frags, 10360 blocks, 0.0% fragmentation)/dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS/dev/ad0s1f: clean, 947684 free (236 frags, 118431 blocks, 0.0% fragmentation)tunefs: soft updates setmgd: commit completeSetting initial options:debugger_on_panic=NO debugger_on_break=NO.Doing initial network setup: hostname.Initial interface configuration:fxp0: Multicast addr command failedfxp1: Multicast addr command failedadditional daemons: syslogd.checking for core dump...savecore: Router rebooting after a normal shutdown....Additional routing options:.Doing additional network setup:.Starting final network daemons:.setting ldconfig path: /usr/libstarting standard daemons: cron.Initial rc.i386 initialization:.rc.i386 configuring syscons:.Local package initialization:.starting local daemons:.Wed Aug 11 22:04:21 GMT 2004Amnesiac (ttyd0)login: Aug 11 22:04:26 init: process_mode mode=BOTH cmd=adaptive-services master_mode=1Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: Amnesiac (ttyd0)login: adminPassword:Login incorrectlogin: login: root--- JUNOS 6.0R1.3 built 2003-07-24 02:20:37 UTCTerminal type? 00:00:18 > via fxp0.010.37.144.218/32 * 00:00:18 Local via fxp0.0root> ping 10.37.144.12 2189 PING 10.37.144.218 (10.37.144.218): 56 data bytes64 bytes from 10.37.144.218: icmp_seq=0 ttl=255 time=15.169 ms64 bytes from 10.37.144.218: icmp_seq=1 ttl=255 time=0.326 ms^C--- 10.37.144.218 ping statistics ---2 packets transmitted, 2 packets received, 0% packet lossround-trip min/avg/max/stddev = 0.326/7.748/15.169/7.422 msroot> root> ping 10.37.144.218 254 PING 10.37.144.254 (10.37.144.254): 56 data bytes^C--- 10.37.144.254 ping statistics ---2 packets transmitted, 0 packets received, 100% packet lossroot> show arp root> show interfaces fxp ^'fxp' is ambiguous.Possible completions: Physical or logical interfacefxp0 fxp0.0 fxp1 root> show interfaces fxp 1 Physical interface: fxp1, Enabled, Physical link is DownInterface index: 2, SNMP ifIndex: 2Type: Ethernet, Link-level type: Ethernet, MTU: 1514, Speed: 10mDevice flags : Present Running No-CarrierInterface flags: Hardware-Down SNMP-TrapsLink type : Half-DuplexCurrent address: 08:00:09:dc:16:06, Hardware address: 08:00:09:dc:16:06Last flapped : NeverInput packets : 0 Output packets: 0root> root> show interfaces fxp1 0 Physical interface: fxp0, Enabled, Physical link is UpInterface index: 1, SNMP ifIndex: 1Type: Ethernet, Link-level type: Ethernet, MTU: 1514, Speed: 100mbpsDevice flags : Present RunningInterface flags: SNMP-TrapsLink type : Full-DuplexCurrent address: 00:08:c7:43:3c:03, Hardware address: 00:08:c7:43:3c:03Last flapped : NeverInput packets : 0 Output packets: 0Logical interface fxp0.0 (Index 64) (SNMP ifIndex 13) Flags: SNMP-Traps Encapsulation: ENET2 Protocol inet, MTU: 1500 Flags: Is-Primary Addresses, Flags: Is-Default Is-Preferred Is-Primary Destination: 10.37.144/21, Local: 10.37.144.218, Broadcast: 10.37.151.255root> show interfaces terse Interface Admin Link Proto Local Remotedsc up upfxp0 up upfxp0.0 up up inet10.37.144.218/21fxp1 up upgre up upipip up uplo0 up uplo0.16383 up up inet lsi up upmtun up uppimd up uppime up uptap up uproot> root> show interfaces terse Interface Admin Link Proto Local Remotedsc up upfxp0 up upfxp0.0 up up inet10.37.144.218/21fxp1 up upgre up upipip up uplo0 up uplo0.16383 up up inet lsi up upmtun up uppimd up uppime up uptap up uproot> show interfaces fx0 p0 1 terse Interface Admin Link Proto Local Remotefxp1 up uproot> root> show interfaces fxp1 terse 0 terse Interface Admin Link Proto Local Remotefxp0 up upfxp0.0 up up inet10.37.144.218/21root> exit root@% cd /varroot@% lsbin db log tmpcrash etc run transfercron home swroot@% cd etcroot@% lsalarmd.conf issue passwdaprobed.conf issue- pwd.dbbootpd.conf keyadmin.conf rc.conf.incchassisd.conf keyadmin.conf- rc.conf.inc-chassisd.conf- kmd.conf rc.ui.defaultscosd.conf kmd.conf- rc.ui.defaults.rawdcd.aps.conf master.passwd resolv.confdcd.irsd.conf master.passwd- resolv.conf-dcd.vrrp.conf mgd.conf spwd.dbfilters mgd.conf- sshd_confgroup motd sshd_conf-group- newsyslog.conf sslgtpcd.conf newsyslog.conf- ssl-gtpcd.conf- ntp.conf sysidshosts ntp.keys sysids-hosts- ntp.keys- syslog.confifinfo.conf pam.conf syslog.conf-ifinfo.conf- pam.conf- ttysinetd.conf pam_radius.conf ttys-inetd.conf- pam_radius.conf- vrrpd.confinit.inc pam_tacplus.conf vrrpd.conf-irsd_rtins.conf pam_tacplus.conf-root@% cd file1 file2 ln [-fisv] file ... directory link file1 file2root@% ifconfigfxp0: encaps: ether; framing: etherflags=0x3/0x8000 curr media: i802 0:8:c7:43:3c:3fxp0.0: flags=0x8000 inet primary local=10.37.144.218 dest=10.37.144.0/21 bcast=10.37.151.255fxp1: encaps: ether; framing: etherflags=0x3/0x8000 curr media: i802 8:0:9:dc:16:6lsi: encaps: (null); framing: pseudoflags=0x3/0x8000 dsc: encaps: (null); framing: pseudoflags=0x3/0x8000 lo0: encaps: loopback; framing: localflags=0x103/0x8000 lo0.16383: flags=0x8000 inettap: encaps: other; framing: pseudoflags=0x3/0x8000 gre: encaps: (null); framing: flags=0x3/0x8010 ipip: encaps: (null); framing: flags=0x3/0x8000 pime: encaps: (null); framing: flags=0x3/0x8000 pimd: encaps: (null); framing: flags=0x3/0x8000 mtun: encaps: (null); framing: flags=0x3/0x8000 root@%show intshow: Command not found.root@% cliroot> show interfaces terse Interface Admin Link Proto Local Remotedsc up upfxp0 up upfxp0.0 up up inet10.37.144.218/21fxp1 up upgre up upipip up uplo0 up uplo0.16383 up up inet lsi up upmtun up uppimd up uppime up uptap up uproot> configure Entering configuration moderoot# ecit dit fx0 p0 ^syntax error, expectingor .root# edit interfaces fxp0 root# / ?Possible completions: Execute this commandactivate Remove the inactive tag from a statementannotate Annotate the statement with a commentcommit Commit current set of changescopy Copy a statementdeactivate Add the inactive tag to a statementdelete Delete a data elementedit Edit a sub-elementexit Exit from this levelhelp Provide help informationinsert Insert a new ordered data elementload Load configuration from an ASCII filequit Quit from this levelrename Rename a statementrun Run an operational-mode commandsave Save configuration to an ASCII fileset Set a parametershow Show a parameterstatus Display users currently editing the configurationtop Exit to top level of configurationup Exit one level of configurationwildcard Wildcard operations---(more 100%)--- root# de ^'de' is ambiguous.Possible completions:deactivate Add the inactive tag to a statementdelete Delete a data elementroot# de lete in ^syntax error.root# delete in t ^syntax error.root# delete int nt ^syntax error.root# delete int ls ^unknown command.root# ifconfig ^unknown command.root# exit root# set routing-options static route default nexthop 10.37.144.18 retainroot# ...tic route default nexthop 10.37.144.18 retain no-readvertise root# commit commit completeroot# exit Exiting configuration moderoot> ping 10.37.144.19 PING 10.37.144.19 (10.37.144.19): 56 data bytes^C--- 10.37.144.19 ping statistics ---3 packets transmitted, 0 packets received, 100% packet lossroot> l re ^'re' is ambiguous.Possible completions:request Make system-level requestsrestart Restart a software processroot> re quest system software add ?Possible completions: URL or path of packagechargingd_log_data.tmpSize: 0, Last changed: Aug 11 21:56:39delay-restart Do not restart daemonsforce Force package to be added (ignore warnings)jbundle-6.0R1.3-export.tgzSize: 39040014, Last changed: Aug 11 21:53:02no-copy
页:
[1]