求助,为什么我用了太美老大的可桥接的CL后网速度变慢了???
为什么我用了太美老大的可桥接的CL后网速度变慢了???原来用2.16硬盘版,PING DNS都在1MS以内
现在换成支持桥接的那个新版本后,PING DNS的值不稳定,在1MS到20MS之间跳,原来很稳定的啊,不知为什么,而且换了可桥接的这个版本后我并没有使用桥接功能,其他配置也跟原来一样,网络环境也一样,请高手解答一下??
以下是在WEBADMIN中PIN DNS的信息
PING 202.103.96.112 (202.103.96.112): 56 data bytes
64 bytes from 202.103.96.112: icmp_seq=0 ttl=251 time=0.7 ms
64 bytes from 202.103.96.112: icmp_seq=1 ttl=251 time=0.7 ms
64 bytes from 202.103.96.112: icmp_seq=2 ttl=251 time=3.5 ms
64 bytes from 202.103.96.112: icmp_seq=3 ttl=251 time=11.0 ms
--- 202.103.96.112 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.7/3.9/11.0 ms
PING 202.103.96.112 (202.103.96.112): 56 data bytes
64 bytes from 202.103.96.112: icmp_seq=0 ttl=251 time=0.6 ms
64 bytes from 202.103.96.112: icmp_seq=1 ttl=251 time=11.0 ms
64 bytes from 202.103.96.112: icmp_seq=2 ttl=251 time=10.9 ms
64 bytes from 202.103.96.112: icmp_seq=3 ttl=251 time=10.9 ms
--- 202.103.96.112 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.6/8.3/11.0 ms
PING 202.103.96.112 (202.103.96.112): 56 data bytes
64 bytes from 202.103.96.112: icmp_seq=0 ttl=251 time=11.0 ms
64 bytes from 202.103.96.112: icmp_seq=1 ttl=251 time=0.7 ms
64 bytes from 202.103.96.112: icmp_seq=2 ttl=251 time=11.0 ms
64 bytes from 202.103.96.112: icmp_seq=3 ttl=251 time=0.6 ms
--- 202.103.96.112 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.6/5.8/11.0 ms 呵呵,自己已经搞定了,原来是驱动问题,我用的E100.O的驱动,我的是82559的网卡,同样是NAPI的驱动,但老大的桥接版和强力修改版中的E100.O大小是不同的,我换成强力修改版中的E100.O后,PING 值马上恢复了,保持是0.5MS
页:
[1]