关于coyote使用82559网卡的问题，请热心人帮忙下，谢谢
用的是coyote反尖兵版的，以前一直使用的是8139的网卡，ping网关响应一直都是小于1ms,更换为82559网卡后，ping的值为1或者10ms,ping电信dns服务器值会相差5ms左右，ping网站的值和以前差不多，所以想问一下这个情况是否正常，如果不正常是什么问题？如何操作。万分感谢回复 #1 ppbay 的帖子
下面是启动时候的信息，架载的驱动对不对啊？8139too Fast Ethernet driver 0.9.27
3c505.c: warning, using default DMA channel,
3c505.c: module autoprobe not recommended, give io=xx.
3c505.c: Failed to register card at 0x0.
3c507: register_netdev() returned non-zero.
3c515.c:v0.99t 17-Nov-2001 becker@scyld.com and others
0 3c515 cards found.
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
ac3200.c: No ac3200 card found (i/o = 0x0).
at1700: register_netdev() returned non-zero.
cs89x0.c: Module autoprobing not allowed.
cs89x0.c: Append io=0xNNN
eth0: depca_probe() cannot find device at 0x0200.
dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
FW Version=$Version$
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
e100: Intel(R) PRO/100 Network Driver, 3.4.14-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: Found IRQ 10 for device 00:0d.0
e100: eth0: e100_probe: addr 0xf4200000, irq 10, MAC addr 00:02:B3:A8:C5:F5
PCI: Found IRQ 15 for device 00:0e.0
e100: eth1: e100_probe: addr 0xf4201000, irq 15, MAC addr 00:D0:B7:75:DE:B8
Intel(R) PRO/1000 Network Driver - version 5.7.6-k1-NAPI
Copyright (c) 1999-2004 Intel Corporation.
e2100.c: Presently autoprobing (not recommended) for a single card.
e2100.c: No E2100 card found (i/o = 0x0).
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkinand others
eepro_init_module: Probe is very dangerous in ISA boards!
eepro_init_module: Please add "autodetect=1" to force probe
eexpress.c: Module autoprobe not recommended, give io=xx.
eexpress.c: Failed to register card at 0x0.
epic100.c:v1.11 1/7/2001 Written by Donald Becker
http://www.scyld.com/network/epic100.html
(unofficial 2.4.x kernel port, version 1.11+LK1.1.14, Aug 4, 2002)
eth16i.c: Presently autoprobing (not recommended) for a single card.
eth16i.c No Eth16i card found (i/o = 0x0).
eth2: ewrk3_probe() cannot find device at 0x0300.
fealnx.c:v2.51 Nov-17-2001
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30.
hp.c: Presently autoprobing (not recommended) for a single card.
hp.c: No HP card found (i/o = 0x0).
hp-plus.c: Presently autoprobing (not recommended) for a single card.
hp-plus.c: No HP-Plus card found (i/o = 0x0).
lance.c: Module autoprobing not allowed. Append "io=0xNNN" value(s).
eth2: i82596 initialization timed out
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
originally by Donald Becker
http://www.scyld.com/network/natsemi.html
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
ne.c: You must supply "io=0xNNN" value(s) for ISA cards.
ni52: Autoprobing not allowed for modules.
ni52: Set symbols 'io' 'irq' 'memstart' and 'memend'
NI5010: Autoprobing for modules is hazardous, trying anyway..
sis900.c: v1.08.07 11/02/2003
SMC9194: You shouldn't use auto-probing with insmod!
smc-ultra.c: Presently autoprobing (not recommended) for a single card.
smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
starfire.c:v1.03 7/26/2000Written by Donald Becker
(unofficial 2.2/2.4 kernel port, version 1.03+LK1.3.9, December 13, 2002)
sundance.c:v1.01+LK1.09a 10-Jul-2003Written by Donald Becker
http://www.scyld.com/network/sundance.html
ThunderLAN driver v1.15
TLAN: 0 devices installed, PCI: 0EISA: 0
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
via-rhine.c:v1.10-LK1.1.19July-12-2003Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
wd.c: Presently autoprobing (not recommended) for a single card.
wd.c: No wd80x3 card found (i/o = 0x0).
winbond-840.c:v1.01-d (2.4 port) Nov-17-2001Donald Becker
http://www.scyld.com/network/drivers.html
parport0: PC-style at 0x378 (0x778)
parport0: irq 7 detected
LCD: init OK, iobase: 0x378, rows: 2, columns: 16
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
send_arp uses obsolete (PF_INET,SOCK_PACKET)
页:
[1]