从光盘引导，linux启动了，界面真漂亮！30秒以后进入图形界面，单击硬盘图标，进入资源管理器（借用windows的说法）把coyote-2.10-beta5.tar.gz从
硬盘拷贝进linux的虚拟目录（因为硬盘分区是只读的），单击左下脚像舵轮的
图标，找到command xxxxxxx项（就像windows的“运行”），输入Konsole，确认，会打开字符窗口然后就像下面所写的一步一步来，很容易的，
下面#和$符号后面是输入的命令，和dos差不多啊 //以后是加的说明
knoppix@ttyp0$ su //可能是改变登陆用户吧 看@前面变了
root@ttyp0# dir //看看有什么文件
Desktopc210b5.tar.gztmp //包括c210b5.tar.gz，就是前面拷贝的
root@ttyp0# tar -xzf c210b5.tar.gz//解压缩
root@ttyp0# dir //列目录
Desktopc210b5.tar.gzcoyotetmp//出现一个新文件夹
root@ttyp0# cd coyote//进入这个新文件夹
root@ttyp0# dir//看看有什么
AUTHORS buildall.shmakefloppy.sh newkernel.shscripts
ChangeLog.txtbuildroot makerelease.shpackages utils
README data makesnap.sh pkgsrc winsrc
bin floppy mnt resetall.sh
root@ttyp0# ./makefloppy.sh //好戏开始了
Coyote floppy builder script v2.9
Please choose the desired capacity for the created floppy:
1) 1.44Mb (Safest and most reliable but may lack space needed for some options)
2) 1.68Mb (Good reliability with extra space) - recommended
3) 1.72Mb (Most space but may not work on all systems or with all diskettes)
Enter selection: 1 //让选择软盘的大小，记得论坛里有人说过增大软盘容量的方法
Please select the type of Internet connection that your system uses.
1) Standard Ethernet Connection
2) PPP over Ethernet Connection
3) PPP Dialup Connection
Enter Selection: 2 //选择上网宽带类型，PPPoE拨号
Configuring system for PPP over Ethernet.
By default, Coyote uses the following settings for the local network interface:
IP Address: 192.168.0.1
Netmask: 255.255.255.0
Broadcast:192.168.0.255
Network: 192.168.0.0
Would you like to change these settings? : n//是否改变设置
Enter PPPoE username: name@adsl
Enter PPPoE password: password //拨号的用户名和密码
Enter the domain name for your area: localdomain //主机名字，它有什么用，谁能告诉我？？
Enter your primary DNS server IP: 111.22.33.44
Enter your secondary DNS server IP: 222.22.33.44//DNS服务器IP地址
You can either
- keep up the connection permanently
- or connect automatically on outbound traffic
and close the connection after a period of
inactivity that you can define
Which option do you want : 1//请明白的朋友给讲一下这个选项
Do you want to enable the coyote DHCP server? : y
Enter DHCP range starting IP :
Enter DHCP range ending IP : //DHCP设置
If you don't know what a DMZ is, just answer NO
You you like to configure a De-Militarized Zone? : n
//如果你不知道什么是DMZ,请选择NO,真是先知啊，我还真不明白
You now need to specify the module name and parameters for your network cards.
If you are using PCI or EISA cards, leave the IO and IRQ lines blank.
//选择网卡
Enter the module name for you local network card: 8139too //内网卡
Enter IO address (Leave blank for PCI cards): //直接回车
Enter IRQ (Leave blank for PCI cards)://直接回车
Enter the module name for your Internet network card: 8139too //外网卡
Enter IO address (Leave blank for PCI cards):
Enter IRQ (Leave blank for PCI cards):
Checking module deps for (8139too,8139too)...
Module 8139too dep = mii
Module 8139too dep = mii
Copying module: drivers/mii.o
Copying module: drivers/8139too.o
If you have a syslog server on your LAN you want Coyote to send its syslog
data to, you can specify the address here. If unsure or you do not have a
syslog server, leave this entry blank.
//好像是指定syslog文件在局域网的存放地，
Syslog server address: //不管它，直接回车
Building package: etc
Building package: local
Building package: modules
Building package: root
Building package: dhcpd
Building package: webadmin //出现的是制作各种配置文件的信息吗？
Make sure that you have a floppy in the first floppy drive
in this system and press enter to continue...
//提示软盘是否在软驱里
Formatting /dev/fd0u1440
Double-sided, 80 tracks, 18 sec/track. Total capacity 1440 kB.
Formatting ...1-2--99--100 done
Verifying ...1--2-99--100 done
bin/mkdosfs 2.2 (06 Jul 1999)
Installing boot loader...
Copying files...
`floppy/SYSLINUX.DPY' -> `mnt/SYSLINUX.DPY'
cp: omitting directory `floppy/config'
`floppy/dhcpd.tgz' -> `mnt/dhcpd.tgz'
`floppy/etc.tgz' -> `mnt/etc.tgz'
`floppy/linux' -> `mnt/linux'
`floppy/local.tgz' -> `mnt/local.tgz'
`floppy/modules.tgz' -> `mnt/modules.tgz'
`floppy/root.tgz' -> `mnt/root.tgz'
`floppy/syslinux.cfg' -> `mnt/syslinux.cfg'
`floppy/webadmin.tgz' -> `mnt/webadmin.tgz'
`floppy/config/coyote.cfg' -> `mnt/config/coyote.cfg'
`floppy/config/fireloc.cfg' -> `mnt/config/fireloc.cfg'
`floppy/config/firewall.cfg' -> `mnt/config/firewall.cfg'
`floppy/config/hosts.dns' -> `mnt/config/hosts.dns'
`floppy/config/portfw.cfg' -> `mnt/config/portfw.cfg'
`floppy/config/qosfilt.cfg' -> `mnt/config/qosfilt.cfg'
`floppy/config/reserve.cfg' -> `mnt/config/reserve.cfg'
//一张软盘制作成功了
Would you like to create another copy of this disk ?n
root@ttyp0#
这就是我，一个linux无知者的linux之旅，到此结束 支持原创，谢谢分享!
页:
[1]