现在最新版的2.9.14,大家可以看看做了很多修改哦
现在最新版的2.9.14,大家可以看看做了很多修改哦,买正版还是值得考虑的.What's new in 2.9.14:
*) fixed upgrade from version 2.8 to keep correct order in web-proxy
rule lists and radius server list;
*) ping shows more types of ICMP reply messages, including
destination unreachable;
*) fixed some ethernet card autonegotiation/speed/duplex settings;
*) RB500 ether1 interface has mdix-enable feature (enabled by default)
*) fixed bgp in routing package, did not work in previous version;
*) fixed amount of free-hdd-space on RB500;
What's new in 2.9.13:
*) added support for SSH DSA keys;
*) fixed bug - nstreme link with framer-policy=dynamic-size was not
taking into account framer-limit;
*) fixed bug - RADIUS disconnect request did not work;
*) fixed problem - PPPoE server had too aggressive initial timeouts, and
some clients could not connect;
*) improved WPA link establishment for WDS;
*) fixed problem - interface graphs got lost on reboots;
What's new in 2.9.12:
*) fixed WPA2 when WDS link security profile is other than for interface;
*) do not warn about ssh client automatic tries with empty password if successful
login follows;
*) fixed problem - PPPoE, PPTP and L2TP could loose all connections in some rare cases;
*) added multi-homing support to PPTP server;
*) fixed problem - sometimes WinBox window disappeared when snooping on
wireless interface;
*) fixed problem - WinBox did not show signal strength in wireless
snooper;
*) fixed bug - traffic monitoring on bridge interfaces did not work;
*) added authoritative=after-2sec-delay default option for dhcp server;
*) fixed bug - mac-ping could fail on bridge interface;
What's new in 2.9.11:
*) added hotspot active users list to snmp;
*) fixed OSPF in routing-test package;
*) added complementary Hotspot feature (trial user support);
*) added priority and min-rate fields in rate-limit attribute for
Hotspot, PPP and DHCP;
*) reverted replay window size change that introduced problems
with IPSec in 2.9.9;
*) updated RTL8169 driver;
*) added ability to enable & disable installed packages;
*) test packages included in big upgrade package - each requires enabling to use;
*) fixed bug - hotspot server did not handle correctly disabling of
bridge interface;
*) fixed tx-power selection for SR2 cards in wireless-test;
What's new in 2.9.10:
*) fixed problem - bridge configuration was not kept on upgrade on RB500;
*) fixed problem - PPPoE server did not work on bridge interface sometimes;
What's new in 2.9.9:
*) removed write-sect display from RB500 version. it is not supported on
this version and was showing zeros;
*) changed bridge configuration approach;
*) improved handling of arbitrary characters in console completions;
*) fixed check-gateway in routing-test;
*) improved Simple Queues in WinBox;
*) allowed bypassed hotspot hosts to talk directly with each other even
if address-pool is set for hotspot server;
What's new in 2.9.8:
*) added support for Verizon Express Network PC5220 (AirPrime 5220);
*) increased connection tracking table size;
*) fixed after reboot disappearing WDS interface issue;
*) added 5/10MHz Atheros channel support to wireless-test.npk package (must
be installed separately);
*) added WPA2 (Personal&Enterprise) support to wireless-test.npk package (must
be installed separately);
What's new in 2.9.7:
*) fixed bug - web server could crash sometimes (introduced in 2.9.6);
*) fixed traceroute time display;
*) added route rule configuration;
*) fixed performance problem with universal client on RB500;
*) improved dynamic wireless rate selection;
*) updated WPA to work with Netgear WGE111;
*) added hotspot ip-binding changes to take effect immediately;
*) fixed M3P;
*) fixed queue time limits;
*) added direction matcher to simple qeueues;
*) fixed problems with graphs; 打开npk包后从新pj后在封装成iso文件，就可以使用2.9.14的版本了，主要表现在控制单个带下时不用打字了，先上传和下载的带宽大小如：2M类的，就可以了，确实从2.9.12版开始就在使用了， pj有隐患啊 原帖由 kitcat 于 2006-3-3 13:18 发表
pj有隐患啊
什么隐患？不行了用其他的咯！反正我PJ用了几年了，你叫我买正版？ 我在网上搜了半天都没发现有PJ的下载啊..谁2.97以上版本PJ的发一个给我啊aimgroup@126.com
有新的pj没？
我要呀。 请问用什么软件 打开npk包 ?
页:
[1]