我觉的floppyfw也是很不错的一个选择啊!
http://www.zelow.no/floppyfw/index.html
你给写个教程啊,我们的E文不是很好的!!!
他好象要对CONFIG文件进行修改,我已经制作好了A盘并且系统启动成功,但是不会用了,请指导!!!!!!!!!!!感谢!
其实配置起来很简单的
很好用。但我地址映射做不出来！wsgtrsys，请指点
以上二位请指点怎么用就行了,谢谢
请指点,谢谢!!!!!
主要的配置在config文件中
防火墙的配置在firewall.ini 中可以不改,如果要做端口映射则要修改
把映象文件做到软盘上修改这两个文件就行了。
我用这个东东曾做过一个网关，用四块网卡，其中两根光缆实现ip地址的流量匀衡，一根ADSL指定给几台电脑用，一根是内网。
还用这个做了一个优盘启动的。
QUOTE
主要的配置在config文件中
防火墙的配置在firewall.ini 中可以不改,如果要做端口映射则要修改
把映象文件做到软盘上修改这两个文件就行了。
我用这个东东曾做过一个网关，用四块网卡，其中两根光缆实现ip地址的流量匀衡，一根ADSL指定给几台电脑用，一根是内网。
还用这个做了一个优盘启动的。
请问你这个网关是什么配置。。。。。？？
教教啊,我现在启动起来不大会配置!!!!! :oops:
CPU C266内存 32m 用光盘启动
这么好的电脑!!!!你可以安装WIN98+WINGATE了
用linux的话开它一年也没有问题,用win98 一、二天就要启动一次了。
config配置
#
# Configuration for floppyfw
#
# Fill in the blanks.
#
# For configuring of modules to use,
# this includes the network interfaces: /modules.lst
# For configuring firewall rules and incoming traffic: /firewall.ini
# For configuring extra network interfaces you may use netwirk.ini
#
# Outside network:
#
#
# DHCP is the hook for the DHCP-client for the outside interface.
# If used, you may have hangups of connections when the client has
# to get a new IP-address.
#
# EXTERNAL is a hook for booting a external startup script from a package.
# the external script has to be in /etc/ext-up.init
#
# For fixed IP setup, set the address and stuff a few sections below.
#下面三种方式选择一种没有'#'的是有效的。pppoe 方式有效。
#
#专线如光缆、网线上网
#OUTSIDE_IP=
#由isp提供的DHCP方式上网我想比较少吧
#OUTSIDE_IP=DHCP
#使用pppoe上网如ADSL
OUTSIDE_IP=EXTERNAL
#
# The external script can need you to add your username and password, as
# the PPPoE package does. This is where you can add that.
#如果有pppoe则填上用户名与密码。
USER_IDENT=
USER_PASSWORD=
#
# eth0 default device.
#
OUTSIDE_DEV=eth0
#
# Not nescessary to set these if you are using DHCP
#如果专线则填上提供给你的ip与掩码
OUTSIDE_NETMASK=
OUTSIDE_NETWORK=
#不知道可以不写
OUTSIDE_BROADCAST=
# MAC address for outside nic
# Some ISPs uses bootp style dhcp tables and some just remembers the last
# used MAC address. this allows you to swap nics
# OUTSIDE_MAC=00:00:e8:48:6c:cb
#
# Your inside network, this has 10.42.42.* set as default, this is
# addresses assigned for internal networks according to RFC 1918.
#
# eth1 is the default device for the internal network.
#
INSIDE_IP=192.168.0.1
INSIDE_DEV=eth1
INSIDE_NETWORK=192.168.0.0
INSIDE_NETMASK=255.255.255.0
INSIDE_BROADCAST=192.168.0.255
#
# Misc
# These are not nescessary to set if you are using DHCP.
# (The DOMAIN field might be useful to change)
#
#专线 提供给你的网关
DEFAULT_GATEWAY=
#dns的ip地址
NAME_SERVER_IP1=
NAME_SERVER_IP2=
HOSTNAME=floppyfw
DOMAIN=floppyfwsecured.com
#
# Use a DHCP server on the inside network. (This will turn on the DNSMASQ)
#打开DHCP服务,想打开的话则n改为y
DHCP_DAEMON=n
DHCP_RANGE_START=192.168.0.100
DHCP_RANGE_END=192.168.0.200
#
# Use a caching DNS server on the floppy. (This will automatically be true if
# the DHCP daemon is used.)
#打开DNS缓存n不打开,y打开。如果打开的话则客户端的dns可以为192.168.0.1
DNSMASQ=y
我把你现在的CONFIG配置修改后覆盖了原来的配置可以吧
不可以,有些我省了
哦,省掉的都是不重要的配置吧?